How to Spray your Car At Home With Diy Rattle Can Spray Paint

Автокөліктер мен көлік құралдары

Don't forget to LIKE & SUBSCRIBE
Hi Guys, in this video we will be taking a look at How To spray a car panel with diy rattle cans / aerosol paint cans and see if we can get a professional finish
Join this channel to get access to perks:
/ @tonysrefinishingtv
Robs Custom Paint and Airbrush Channel
/ @dredfxcustompaint
SPRAY PAINTERS NETWORK GROUP
/ 185301786214280
Swage line tool direct link
www.tonysrefinishing.com/s/shop
If you have any questions feel free to ask away and as in any video i will do my best to answer you all.
I hope you guys enjoy and dont forget to like and subscribe
OUR SPONSORS
spsupplies.co.uk/
sales@spsupplies.co.uk
/ spsuppliesltd
/ spsuppliesltd
Business and Colaboration / Sponsor Enquiries
tonysrefinishing@gmail.com
Social media Enquiries
/ tonys_refin. .
or like our facebook page
/ tonysrefinis. .
/ tonys_refinish
#passion4paint

Пікірлер: 128

  • @vettemaniac2237
    @vettemaniac22372 жыл бұрын

    Even a rattle can is genius in the hands of a master. Well done!

  • @joshjelfs6910
    @joshjelfs69105 ай бұрын

    Great video. This has definitely given me the confidence to go ahead and start my very small project

  • @iainatkinson9239
    @iainatkinson92393 жыл бұрын

    It's a superb video that's answered a lot of questions us DIYers at home need to see well done another great vid

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Your welcome mate hope it’s helped abit in some way

  • @Painzzy335
    @Painzzy3358 ай бұрын

    Great videos man. Gives me confidence to work on my car at home. you should do a video on a smart repair/blow in with rattle cans.

  • @iandico
    @iandico2 жыл бұрын

    Wow,that's a nice job for aerosols, learning so much watching your videos,excellently presented too. Thanks

  • @TonysRefinishingTV

    @TonysRefinishingTV

    2 жыл бұрын

    Thanks buddy

  • @125sm3
    @125sm33 жыл бұрын

    Great demonstration of what can be achieved with rattle cans. Nice one.

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Thankyou

  • @vanlifenomad
    @vanlifenomad5 ай бұрын

    Thanks Tony thought you might have a video on this, I'm doing a front wing tomorrow, hope your all good mucker

  • @chrisflux57
    @chrisflux573 жыл бұрын

    Explained and showed it very well Tony 👍🏻

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Thanks Chris

  • @bernardbouchereau215
    @bernardbouchereau2152 жыл бұрын

    Great video would be great for fuel tanks and small parts

  • @husky1232
    @husky12323 жыл бұрын

    Thank you Tony for the video came out good for a rattal can stay safe

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Thanks and you too

  • @dougwernham5209
    @dougwernham52093 жыл бұрын

    Thanks for the video Tony

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Your welcome mate

  • @danielgreen4213
    @danielgreen42133 жыл бұрын

    Great video yet again! especially for people looking to do this kind of job at home. Not relevant to my skill set but thought i would watch to give you the view comment and thumbs up for the support.

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Hey Daniel abs thanks buddy appreciate you still watching even though in a way it’s not relevant to yourself , true viewer right there man 🙏

  • @Love500
    @Love5002 жыл бұрын

    Very interesting thanks. Am learning a lot from videos like this.

  • @TonysRefinishingTV

    @TonysRefinishingTV

    2 жыл бұрын

    Your welcome

  • @steveguest8028
    @steveguest80282 жыл бұрын

    Brilliant as usual Tony 👍

  • @TonysRefinishingTV

    @TonysRefinishingTV

    2 жыл бұрын

    Thanks Steve

  • @perr1don
    @perr1don2 жыл бұрын

    Great video Tony as usual

  • @TonysRefinishingTV

    @TonysRefinishingTV

    2 жыл бұрын

    Thanks Russel

  • @williampaxton871
    @williampaxton8718 ай бұрын

    Great video, Tony. Did you ever do the comparison video between rattle can and sprayer? Bill

  • @fattoamanowoodwork3638
    @fattoamanowoodwork36383 жыл бұрын

    great idea to do this video esp the comparison. Neat!

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Thanks man just to light it would be something abit different

  • @mohmmadalrefai7578
    @mohmmadalrefai7578 Жыл бұрын

    Thanks you

  • @geoffrivett
    @geoffrivett3 жыл бұрын

    Nice video Tony, it does give a novice a little confidence that a diy job could turn out pretty well!!

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Thanks Geoff just thought it would be something people might find interesting

  • @garethprytherch9623
    @garethprytherch96233 жыл бұрын

    Nice to see a job most people can have a go at themselves. Fair play it looks spot on pal. Hope you’re not holding overdoing things and are keeping well. 👍

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Hi Gareth yeah just wanted to add something a little different into the mix for the diy guys , and no mate taking it easier from now on but I’m all good now

  • @redzed40
    @redzed403 жыл бұрын

    great job as always

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Thanks

  • @lummy321
    @lummy3213 жыл бұрын

    This is brilliant Tony man... Love this... Lord Almighty bless you buddy. Peace 💖👑🙏😍🙌👍✌️

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Thanks Bruce

  • @7417928020
    @74179280202 жыл бұрын

    wow brother your presentation goes to a new dimension..let's move forward ... sharing new discoveries and experiences..I'm a Sri Lankan ... congratulations to you

  • @TonysRefinishingTV

    @TonysRefinishingTV

    2 жыл бұрын

    Thankyou man appreciate that

  • @thedjse
    @thedjse2 жыл бұрын

    Great video Tony, thanks for doing this most professionals laugh at rattle cans when I speak to them

  • @TonysRefinishingTV

    @TonysRefinishingTV

    2 жыл бұрын

    I’m not a massive fan of them myself mate but if you get the right stuff I guess you can make a decent job of it like we did

  • @masoodamg6633
    @masoodamg66332 жыл бұрын

    It was great. You have a good spray paint, we have it here, but it is not of that quality and it is very basic. Thank you, I follow your videos and recommend them to my friends. Be healthy

  • @TonysRefinishingTV

    @TonysRefinishingTV

    2 жыл бұрын

    Thanks

  • @medievilassassin
    @medievilassassin3 жыл бұрын

    Great video that mate 😎

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Thanks Jason

  • @kimojoseph8057
    @kimojoseph80573 жыл бұрын

    Wooow Tony factory finish lol 😂 i really enjoy watching that video Tony and that base coat boy o boy it look like a LS-400 that applied it hands down haha 🤣 thanks 🙏 for that video Tony you always hitting us with some new style keep it up much love 👍👍👍👍👍👍👍👍👍👌👌👌👌👌👌👌👌🤙🤙🤙🤙💪💪💪✊✊👏👏👏👏🙏🙏🙏🙏🙏💯💯💯💯💯💯💯💯💯👊👊👊👊👊👊👊👊👊

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Thanks man I try my best for you guys

  • @pattiboychannel311
    @pattiboychannel3112 жыл бұрын

    Looked great

  • @TonysRefinishingTV

    @TonysRefinishingTV

    2 жыл бұрын

    Thanks man

  • @daleaxe1030
    @daleaxe10302 жыл бұрын

    Good job pal nice job

  • @TonysRefinishingTV

    @TonysRefinishingTV

    2 жыл бұрын

    Thanks dale

  • @jonb8241
    @jonb82412 жыл бұрын

    Superb finish 😎👍

  • @TonysRefinishingTV

    @TonysRefinishingTV

    2 жыл бұрын

    Thanks jon

  • @jonb8241
    @jonb8241 Жыл бұрын

    Tony ....Just had a poor colour match whilst using Direct Gloss in a Spray can.... panel was painted about 24hrs ago.... how long do you have to leave before attempting to spray with a fresh mixed can?. Concerned that i have gone way out the window of applying a further layer?! ... what would be best grade of sanding paper to give a decent key? Many thanks Jon

  • @JohnWD40TC02
    @JohnWD40TC023 жыл бұрын

    Had to give this a second look after the chat last night, have to say mate it came out pretty good and the finish is better than a lot of bodyshops could do with the proper spray gun setup. Do you think there was a better turnout last night? seemed to be more people watching and there was a few more on the chat window, hope my ramblings didn't scare them all off 😂 look forward to part 2 mate 👌👍

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Lol another view always helps atm mate and it’s Not doing too bad I guess but views accross the channel have dropped this last month by over 30k which is disheartening tbh but hey we plod along lol

  • @davutyalcin-
    @davutyalcin-3 жыл бұрын

    Hi Tony ,what a great upload man.. i am sorry,its a while ago i did comments on your videos,i was on holiday. Chears buddy

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Thanks buddy and no problem fella hope you’ve had a nice time

  • @davutyalcin-

    @davutyalcin-

    3 жыл бұрын

    @@TonysRefinishingTV yes buddy i was 3 weeks in Turkey,i had a nice time with my parents. Now back in Netherlands back to work mate..

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Sounds brilliant mate some relaxation and family time is always good man

  • @chrisfreemesser5707
    @chrisfreemesser57073 жыл бұрын

    You're never going to get a professional job out of a rattle can but for somebody at home needing to touch up a small repair area this could easily suffice quite nicely (DAMHIKT). Thanks for being open-minded enough to show an alternative to a pro...hopefully you won't lose any business over it :D

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Lol I won’t be buying anymore of those cans trust me lol 😂

  • @joewilson3382
    @joewilson33823 жыл бұрын

    Wow iv been tempted to do my lower front bumper with rattle cans as its battered with chips so i think it would improve it loads

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Your welcome mate hope it helps

  • @joewilson3382

    @joewilson3382

    3 жыл бұрын

    @@TonysRefinishingTV helps loads mate iv painted wheels and stuff with rattle cans so had a rough idea but that makes me want to do it 👍

  • @davidwilliamson2490
    @davidwilliamson24903 жыл бұрын

    Great demo tony quick question polishing buff or da polisher for flat in polishing pannels after work as old school diy prefer the buff

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    See I’m old school in a lot I do but at the same time I like to try new stuff and pick the best option , now I’ve got the hang of the compound and head combination on the da I have to say the da is as quick it puts less heat into a panel and leaves no swirls

  • @mesmerize15
    @mesmerize153 жыл бұрын

    Great finish Tony, how many coats of clear coat did you use 2 or 3? And would you advise a tack coat?

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Thanks man and no mate I went at it like I would with a spray gun just two full wet coats mate as best I could no tack coat as it’s not for a huge build so didn’t want it messing with the finish

  • @Waxvalet
    @Waxvalet3 жыл бұрын

    To say it was a rattle can mate! That’s a good finish. Better than mine with a pro lite ahhaha

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Lol 😂

  • @jimmypratt6450
    @jimmypratt64503 жыл бұрын

    It looks like more work coming my way after the DIY guys watch this lol, i had two mirror backs this week from my local mechanics shop where they tried to paint them and f"""ked up. At least they had a go i suppose but it cost them twice a much LOL .

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Lol that’s why I always say in the beginner series mate you should buy test panels to play with not trying on cars till you know it’s right but that’ll never stop I don’t think

  • @willsachs
    @willsachs3 жыл бұрын

    Great demonstration of alternatives for people without all the needed equipment. What psi did you use to spray with rattle can for base? How many turns out for clear on the nozzle? LOL As always, thanks for sharing.

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Lol that’s good man abs thanks for watching bud

  • @robertbills4290
    @robertbills42903 жыл бұрын

    Cracking job mate was the panel just a test part or was it part of a repair job? Keep looking after yourself buddy Rob

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Nah man just a test panel we use on training days

  • @bill_20
    @bill_203 жыл бұрын

    Fantastic job looks the business! What do you think of the 1k lacquer or is that only for a small repair?

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Personally I wouldn’t use it as it has barely any chemical resistance so it’s no good for most jobs

  • @jayswin2
    @jayswin23 жыл бұрын

    Great video. Can I ask, why not 2k base coat? I hate cellulose paints. They never set hard. Can always dig your nail in

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    This is the same base in this can that I have mixed for spraying it’s proper solvent base

  • @ANDY-we7mr
    @ANDY-we7mr2 жыл бұрын

    tony when you paint a wing or a bumper with base coat or clear tony do you have to cut and buff it

  • @TonysRefinishingTV

    @TonysRefinishingTV

    2 жыл бұрын

    sometimes mate most of the time just the blend area

  • @Sevy77
    @Sevy773 жыл бұрын

    Great video as always Tony, what pad are you using on da polisher? Looks like a rupes blue but not sure

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Yes mate the rupes heavy cut blue da pad best for cutting by a long shot

  • @Sevy77

    @Sevy77

    3 жыл бұрын

    @@TonysRefinishingTV i've been using their blue wool one and they are really good aswell, used to have a thing against wool until i used the rupes one.

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Yeah there will ones are good I just found they didn’t last as long as I’d like tbh

  • @matthewdavies6722
    @matthewdavies67222 жыл бұрын

    Hi mate what sort of da would you recommend for flatting/polishing and general swirl removal for reasonably price. Thanks

  • @TonysRefinishingTV

    @TonysRefinishingTV

    2 жыл бұрын

    autobright direct ones mate very good but not silly money

  • @chrisb5839
    @chrisb5839 Жыл бұрын

    You mention the longevity of the paint, how is the 2k in the can any different to 2k through a paint gun? Thanks.

  • @TonysRefinishingTV

    @TonysRefinishingTV

    Жыл бұрын

    the propellant the thickness different chemical makeup ect theres a few differences

  • @tonyhaz6664
    @tonyhaz66643 жыл бұрын

    Made that look simple tone, Done a great job, how long did you wait between coats, and what about if not using 2k paint, is it same method?

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Yes same method mate but if your not using 2k paint drying times will be a lot longer between coats and the final finish will be a lot less durable on it

  • @tonyhaz6664

    @tonyhaz6664

    3 жыл бұрын

    @@TonysRefinishingTV Cheers tone 👍

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    No problem mate

  • @ferdiyurdakul
    @ferdiyurdakul3 жыл бұрын

    For anyone watching this to learn how to diy, one thing I'll stress is the importance of the rattle can itself. Unlike a gun, there's no adjustment. If you get a crap can it'll come out crap. Some don't even have a fan. Just a round fan. Get your rattle cans from a decent place. Good work again Tony.

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Thanks man and good advice too

  • @barryford7135
    @barryford71352 жыл бұрын

    Hi Tony great video, how long did you leave between coats?

  • @TonysRefinishingTV

    @TonysRefinishingTV

    2 жыл бұрын

    About 5-10 mins on base and clear mate

  • @barryford7135

    @barryford7135

    2 жыл бұрын

    @@TonysRefinishingTV cheers Tony. 👍

  • @gwaraich2011
    @gwaraich2011Ай бұрын

    Gloss black paint or matte black paint, let me thx

  • @markg6jvy135
    @markg6jvy1353 жыл бұрын

    It would be good to compare the panels in 6 months 👍👏👏

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    It would mate but by then this panel will be long scrapped lol it’s been through a load of bake cycles wash cycles and alsorts before I shoot part two to compare it to a properly painted wing to accelerate the ageing of it

  • @vtec230
    @vtec2303 жыл бұрын

    New haircut suits you 👌👌

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Lol my post lockdown haircut finally have normal hair again

  • @steveborough9819
    @steveborough98193 жыл бұрын

    Hello Tony So the other day I was blending on a panel and everything seems alright to be honest. The only issue I found was after spraying the clear coat. So there was like a line where the new clear coat was meeting the ood clear coat. How can I avoid such a thing from happening again. By the way I've used j tape no edge blend. I'm thinking if I use fade out thinner on the areas that new and old laquers are meeting would sort out that issue? Thanks

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Was the tape applied on a swage line ?

  • @steveborough9819

    @steveborough9819

    3 жыл бұрын

    @@TonysRefinishingTV no it wasn't because the clear was peeling off a bit below the swage line so I couldn't apply the tape on swage line

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Ah that’s where the issue will lie then ideally it needs to be done on a swage line so it’ll loose the join , you may be able to flat and polish the edge off and buff it up mate but I’m not sure otherwise yes use some fade out and don’t go all the way to the tape

  • @Calchick7
    @Calchick72 ай бұрын

    What is wet on wet i no nothing about And is there a reason you spray from bottom going up to top? Instead of top to bottom? Too bad you don't recommend for whole vehicle Thats what I wanted to do thats why I watched this

  • @matthewdavies6722
    @matthewdavies67222 жыл бұрын

    How long do you think this would last? Being 2k in a can mate?

  • @TonysRefinishingTV

    @TonysRefinishingTV

    2 жыл бұрын

    On the panel do you mean or in the tin?

  • @matthewdavies6722

    @matthewdavies6722

    2 жыл бұрын

    @@TonysRefinishingTV sorry yeah on the panel I mean I know it would be longerr than the 1k lacquer cans that are rubbish.

  • @TonysRefinishingTV

    @TonysRefinishingTV

    2 жыл бұрын

    I should think it would last mate but that’s the one thing I’m not sure on or can be sure on tbh

  • @matthewdavies6722

    @matthewdavies6722

    2 жыл бұрын

    @@TonysRefinishingTV ok thanks mate

  • @subwooferroads
    @subwooferroads Жыл бұрын

    Not sure fan spray nozzle is good for blending

  • @TonysRefinishingTV

    @TonysRefinishingTV

    Жыл бұрын

    it probably wouldnt be the best

  • @Jbpipesandmufflers
    @Jbpipesandmufflers Жыл бұрын

    Spraymax as far as i know is filled off with mipa 2k. They do and will hold there shine. And have a propper uv resistance. Longevity.. yes. When you have it mixed on collor by a company that does carpaints. Its the same quality. But in a rattlecan. As you allready mentiont at the start. So youre speaking a little with 2 tonqeus there. Anyway. I think the average diy person doesnt sand and buff it up. And when you have a little more confidence in youre spraymax.. and painted rattlecan style instayd of spraygun style( wich is not fully the same) the orange peel doesnt even had to be there... i know from experiance with these cans...

  • @JohnWD40TC02
    @JohnWD40TC023 жыл бұрын

    Hey video wont play, come on mate sort it out 🙄😂

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Lmfao be patient

  • @JohnWD40TC02

    @JohnWD40TC02

    3 жыл бұрын

    😭😭

  • @andrewboulton9928
    @andrewboulton99283 жыл бұрын

    Great video atrocious music !

  • @TonysRefinishingTV

    @TonysRefinishingTV

    3 жыл бұрын

    Thanks mate and sorry it’s what I like

Келесі