$174, a weekend, and a sore finger. Your accord looks $1000 better. Totally worth it.

@innout3x3

3 ай бұрын

There's a great tool I put on top of the cans that you could use a trigger. For a person who has used a lot of dip, it's a finger saver.

For a teenager car, that was amazing. An affordable paint job on a vehicle that needed some help. Earl Scheib would have been proud!

@jimlim5367

Жыл бұрын

Who is Earl Scheib? May I ask?

Looks better than it did. Here's a tip, they sell a handle that attaches to spray cans that truly makes it easier to spray large quantities of rattle can paint.

@gucciskunkit

3 жыл бұрын

I was going to recommend the same!!!! I feel so sorry for your finger your insane!!

@Marko-bh3pl

3 жыл бұрын

Name of handle?

Great job! Great Dad! That’s how you teach your children A+

I wish I could go back 3 years and tell you about the"Aerosol Trigger handles" that you can put on the spray can so your finger doesn't hurt.... as much. The car turned out FANTASTIC. I would have to add the cost of the mask to this job's cost and you don't want to buy a cheap Ali-Express or TEMU one 🤣 I like the AFFORD logo on the back... nice touch.

I did a similar thing on my "daily driver". Paint was sun faded bad so I painted it in summit racing primer black. I've having to constantly respray it until I decide what to do next. What I learned... just get a gallon of paint and a cheap sprayer and it will turn out better and cheaper than those crappy rattle cans!

Great video. I'm sure Fonzie from Dip Your Car is having a stroke watching this. 🤣

@clairetreadway8020

3 жыл бұрын

My thoughts exactly 😂

@Nellzzz22

3 жыл бұрын

He commented lmao

I think that turned out pretty amazing! Great job! And for under $200-you can’t beat it!

I would personally go for gloss paint but that looks a lot better then it did.

@elliotcoyne7431

3 жыл бұрын

It’s gonna drip like a bitch especially from a spray can

@d_no_allyn_86

3 ай бұрын

Nah this is a much cooler look. Everyone has that glossy look

I wasn’t expecting it to look so great. It looks fresh and clean in the matte white.

The all new Honda Afford. Looks amazing and the quality time with your kids was a added bonus I'm sure. I have peeling door handles and a clear coat deprived hood on mine. May have to do this🤔

This is like an episode of pimp my ride!!!!!! Well done sir!

This was a fun experiment. You can buy a proper PlastiDip car kit (more paint plus DYC sprayer) for about $470 at dipyourcar.com but my goal here was to see how inexpensively we could paint this car and still have it look decent. If we decide to remove the PlastiDip from this car some day we'll post an update video.

@justindoyle5972

3 жыл бұрын

Looks good

@PJBonoVox

3 жыл бұрын

It looks unique and different. An antidote to the sameyness we see every day on the roads. More power to you man.

Really glad you shared this, thank you! I have a 2007 Mazda 3 that sits most of the time and the paint got ruined from some hard water sprinklers. I was able to get it cleaned up, but it was bad enough that a lot of the clearcoat has started to come off and it just looks awful. I might have to make this a weekend project! Thanks again!

Nice job !!! I’ve use Plasti Dip on my rims and to delete the chrome trim on my car but never Dip a whole car your video has inspired me to give it a try

Did that say afford or accord

@skysoldier31

3 жыл бұрын

Yeah! It's a Honda Afford! Well, is it a Honda or a Ford!? Make up your mind. It's a Honda Afford. What are you, a Italian!?

@ufcleanser8806

3 жыл бұрын

It's an accord you can afford

@unnie3101

3 жыл бұрын

He said accord

@calevega819

3 жыл бұрын

i'm dying ☠️☠️☠️

@Fatcamp_tig

3 жыл бұрын

Peep the emblem on the back

Fantastic car looks in the universe shape great job, most of all your honesty that alone speaks about your Integrity excellent job, keep it up.

My heart knew this was in Utah the moment I started watching this video. Didn't even need to see the jazz sticker or church in the background to know 😂

Unreal transformation! The low cost makes it even more spectacular And no, it doesn't look like trash. It USED TO look like trash.

Amazing job!!! Came out real nice!!! Thanks for the tips!!!

Great job DIY guy. Love the video and the car looked much better after!

You guys did a great job. My nephew also drives the same car and indeed it runs forever. It has 180.000 miles on it and still runs fine. His car is a 2004, and the paint isn't that cracked up to be anymore. So thanks for this vid, it would be something duable for us.

Pretty amazing how it turned out. Great job!👏

I am impressed with how well that tuned out. Great video. I've seen people use a grip attachment on rattle cans before to make it easier. I wonder if that would work on Plasti Dip cans

@qmmadi

3 жыл бұрын

It does They sell some

Great job! Looks way better than before.

Nice work! That took a lot of patience to do and you did good. Thanks for the video.

This brings me so much joy!

It looks awesome! Great job!

Nice job ! I would have used a trigger for the can, avoids the drips and helps with better even coat. Very affordable too. Look into it next time.

Good improvement for the cost! That white paint job looks pretty decent for rattle cans. Bet your kids appreciate it.

It amazes me it turned out so good with just spray cans

Wow! That white really makes it look a lot better!

nice transformation :) well done

Getto Painting Tip: Use both hands to spray 2 cans at once! hold them together side-by-side and offset your hand positions a bit as desired.

Great and beautiful work Good job sir

That thing looks amazing

Amazing job! I'm going to do this for my van.

Pretty dang good job..looks awesome 👍👍👍👍

For using just spray cans this isnt bad! Of course I'd still recommend when doing full cars to use the actual spray kit, but for a teens first car looks much better! Nice work!

Looks way better good job

Sweet! Great job!!

Great job!! I did my emblems and chrome

Came out cool, looks much better

Looks awesome I been debating doing this for 2 months you jus encouraged me to do it I jus dont have a garage

Man this came out awesome 😎

The body looks great. I would've left the original rims instead of the black.

@MangoJam420

3 жыл бұрын

What, you don't like the glorious, peeling look of 'plasti-dip special'?

@MrKEMills

3 жыл бұрын

It’s not that the rims look bad, it’s that the car needs larger tires.

@kidflykai03

3 жыл бұрын

@@MrKEMills no it needs lowered

@teenytinytoons

3 жыл бұрын

Original rims better.

Not bad at all for a rattle can, looks clean now! Nice job

tip to prevent sore finger: you can 3d-print a type of lever or trigger for spraypaint-can.

Looks great!

That looks amazing! Now I want to do my car

Looking nice!! 👍🏻

That came out pretty good. Im really thinking of doing this with my car now

I’m impressed

Great job came out pretty damn good

It certainly improved it

Looks great

Some good ole window tint and it’s good to go👍🏾👍🏾 well done

That came out really nice, car looks new, at least from a distance, and 1000% better than the wreck you started with.

Came out great

Awesome looks great love Honda

I would highly recommend getting the handle trigger that clips to the can. Saves your finger!

That’s looks awesome‼️‼️👌🏽💯

Great job

Amazing job.

Looks good I didn't think I would need that many cans

Great job!

Just for future reference, when doing wheels, take them off the car. Jack it up and do 1 wheel at a time, so if you ever need to do your brakes or have a flat on the freeway, you are able to remove your wheel and lugs with hand tools. The plasti dip with get into the crevice and make it really hard to get off.

Cool job

I love this. Don't know what to think, but I love it.

Shouldn't of took you 20 or more spay can. The problem was that you was spraying way to close and not allowing the paint to have a more wider spread

Nice job👍🏾

Forest, a 2005 Honda AFFORD.. Priceless! Looks good too!

Great video

Nice job

At 6:48, for whatever reason was the beginning of “Shake it Off,” which would’ve been appropriate with the shaking of the cans 😂

Looks great. I did like it better with the silver wheels though.

7:25 Just noticed it said Afford lol The F is for Forest 😂❤

@LRN2DIY

Жыл бұрын

Had to have a bit of fun with it.

I like it. I'm all about diy and inexpensive.

Really nice

Looks good to me when the wheels were silver they looked better.

Wow! Looks like the car is a hot rod white. The wheels came out nice and you were able to do all of them without any overspray on the white. I woulda tried keeping the lug nuts chrome or paint them black later if you didn’t like the way they looked.👍👍👍

Awesome!!

Awesome!

Not bad at all I like it

Very nice end look for self made project how does the dip hold up the high presure washing ? Im curious to know since i have few ideas for my car too

That was brilliant, really enjoyed it :-)

Looks way better then before

Swell , I’m sold …………. can’t beat that for the price , again thank you .

Def looks better, they make a nice cheap spray can trigger too. Can help a lot with finger fatigue. But clean that tip often.

So you just sanded it down with the final 220 grit and then washed it? Nice video

Great Job. you are a good fixer upper. Your next fixer upper that need to do and video tape as well and obviously get it fix is that you go to the middle east and assemble some peaceful solutions for them fast and lasting. I am sure you are able. Love the way the car looks.

This looks awesome I will be doing the same !

It looks a 100% better! Good job, But I was wondering how long does the plastic dip last on a vehicle? And is it safe to take it through a car wash or will it melt off you stuff are coming off during the car wash

I really like the way you teach me how exactly paint a car by spray Cans. But i have a question which i need your own answer. Will this spray Cans exist long or it will erase by the sunlight???????

Love it

It looks decent bro good job

You can get an aerosol handle that makes spraying less painful. Finger is fine for one can, but an aerosol trigger is better 👍

Nice, I'm tempted to do one of my cars in plastidip.... maybe the 928s :D

Great effort and great job. Throwing the paint on is just the last stage in this colossal job. If you came to the point of having the whole body ready for paint, having the rubber seals, handles and other stuff off your way is not so much more jib and it might make a huge difference in your final product, getting practically profissional, because the real hard stuff is straighting, puttying and sanding. Paint job as manouvering the paint gun is just wonderful sensation. You should try it. Congratulations

Way to be practical