DIY 5 Minutes Bed Frame
Тәжірибелік нұсқаулар және стиль
Easy DIY Wooden Bed Frame Platform made from framing lumber.
In this 5 minute video im showing you how i made my DIY bed frame, all from framing lumber and pocket screws. You can follow my full step by step tutorial on my instructable, i have included several plans from my sketch up build.
www.instructables.com/id/DIY-...
I bought all my material at my local hardware store, you can find the list on my instructable.
This king size bed platform is very solid, and the reason i used pocket screw is i can dissasemble it if i move.
If you liked this video, please take the time to leave me a comment below and don't forget to subscribe! :)
Пікірлер: 1 100
▶️ Hey Guys! 👋 I have received several questions about where to find those angle corner clamps. You can find them here : amzn.to/3Ek14s5 ( Affiliate link )
@KennySmith86
2 жыл бұрын
Hi. What would you do if you wanted to make the bed higher off of the floor
@julietellis4891
2 жыл бұрын
Love it up
@tylerdurden5150
Жыл бұрын
Combien ça coûterait les matériaux à peu près
@worldwidegamer1983
6 ай бұрын
why not juse use 4x skids for free and ad some fancy on the outside and save 90% of cost
I’ve been working with wood my whole life, I can attest this is one solid piece. The info is clear and to the point. Very well done, sir.
@Demigod69x
11 ай бұрын
That’s what she said
@Lyve613official
9 ай бұрын
What size bed did you make this for
@ontheroadwithjames954
Ай бұрын
I don't work with wood, never have but along the inside rails for the straps, could you not set the straps to sit flush with the top edge of rails, connecting the straps together along the underside so you can lift all the straps at same time to clean underneath the bed, by sitting them inside the rails you wouldn't need to screw them down, or you could possibly put a hinge on the frame for the strap?
This is incredibly sturdy compared to what is minimally required. Looks amazing
I would have had the slats sitting 2 inches lower into the frame so the mattress doesn't slide about, but very well made bed overall
@mridahokrieg6114
2 жыл бұрын
Same! But still a great build overall!
@heartanddagger5861
2 жыл бұрын
I agree..great tip.
@dirty_hairy9040
2 жыл бұрын
I’m doing this frame with a few modifications as this and the head board with 3 boards
@nathanbehl8559
2 жыл бұрын
Just built mine sat the 2/4 ledger 2inches below the top of the frame, bed sits in prefect.
@east5871
2 жыл бұрын
I’m redoing my bed frame to something like this. Currently the mattress sits on a flat surface and I’ve never had a problem with the mattress sliding out. You must be more rambunctious in your bed! 😂
Man, this bed looks amazing. I love the sturdiness of it. It looks simple, yet very beautiful. You definitely picked the right color. That's definitely the bed I wana make.
Wow looks incredible! My wife and I are looking to do something like this. So thanks for all of the tips and tricks.
A great build! Simple, yet sturdy! I can't wait to get started!
idk why im watching this, i can barely build ikea furniture, i think the quarantine has got to me 😪
@x239guyonit
4 жыл бұрын
lol
@Chemi5
4 жыл бұрын
Me and u both😂😂😂😂
@dscott2542
4 жыл бұрын
If you are inspired by this recording you have the skill to build it!! This is not an especially difficult design, and is an absolutely beautiful finish. You will love this so much more than asembling flat pack furniture (which happens to be something I do as a side business)
@videoslue
3 жыл бұрын
Lmfao I bought an ikea king malm. About to put it together and was like make I can build one. After seeing this I'm back to I can barely put the ikea together
@craigbradford5730
3 жыл бұрын
I didnt think I could build a shed but I did and it is awesome. I have never made furniture and this is going to be my first project!
Excellent project. Clean, modern, and practical. Thanks for sharing.
Yep you are right it took 5 minutes to watch you work, but 👏👏👏👏👏👏👏👏👏👏👏to all the hours of labor!!! Amazing job!
Thank you for the video. I was going to buy something like this but now I think I'm going to build it. I work as a mechanic so I have basic hand skills and I own almost all of the tools you have so thanks for that man, I really appreciate it 😊
@SEBTECHDIY
3 жыл бұрын
Awesome! 😁 Go for it! 👍
Oh, what a brilliant idea! And of course, I absolutely cannot wait to gather all the necessary tools for this little endeavour. Oh, the joy of searching and gathering tools. I'm positively thrilled!
Awesome bed frame. So far the best looking one here! And so simpler
I need a new bed and the prices in the furniture stores are frightening plus the quality isn’t amazing. So, I’ll make my own. Thank you for your video and ideas.
This makes me want to make a new bed frame!!!
I am going to be making this bed for myself thank you so much for showing your progress I love the bed frame you made!!
I am no woodworker, and really enjoyed this video. Good stuff.
Why the hell would anyone dislike this video? It was great and gives another cool option to build a base for a bed. Nice job man.
@rumdab
3 жыл бұрын
It's the internet lol, if there was a video where the world would end when someone clicks the dislike button I assure you someone will press it 😂
@blahbee7223
3 жыл бұрын
Probably because it says 5 min DIY lol There’s a lot of dumb ppl out there.
@east5871
2 жыл бұрын
Those who can, do! Those who can’t, criticize!
@erenymn
2 жыл бұрын
@@blahbee7223 yes I disliked it because it says 5 mins, its kinda clickbait.
@diamondowens4501
2 жыл бұрын
Cause they lazy and don’t know how to be creative so they hate
Looks great. You were in kreg jig heaven. I don’t know if I have the patience to make that many pocket holes 😂
@SEBTECHDIY
4 жыл бұрын
Oh yea that's alot , took me about 2 hours to drill all these holes 😅
This bed certainly looks better and of course stronger than many expensive beds on the market, and it has a cool rustic look to it too, AWESOME WORK!
@SEBTECHDIY
3 жыл бұрын
Glad you like it! Thank you Miguel! :)
@kevingp12
7 ай бұрын
Yes a similar looking bedframe like this would go for at least 1k, and be of trash quality
Great work; you build with "overkill." That will become a family heirloom!
Amazing that you took the time to show us and even give the entire plan..thank you.🙌
@SEBTECHDIY
2 жыл бұрын
Glad it was helpful! :)
@letitiawilliams6004
2 жыл бұрын
I agree! Yes, thank you. My son needs a sturdy bed. He's 6' 5" 335lb and only 18. Again, THANKS A BUNCH!
Well done!, Sir. You've tangiblelized what has been floating in my brain. I appreciate you sharing with the world, and another compliment is on how precise and to the point your video is. I'd keep checking more vids. As u post them
It will definitely take me more than 5 minutes, but I will be making this bed for sure. Excellent work.
Looks wonderful- Gorgeous job & thanks so much for sharing!
Love!! Exactly what I’ve been looking for! It came out beautiful!
Beautifully done! Your work speaks for itself!! You should sell them!! I'd buy one!!
@denisekrejci6294
Жыл бұрын
They are sold, but the price is approximately 6,000-10000!
Cool build. I’m making one now after watching this 👍👍👍
Awesome job! Just what I needed, simple and good looking, I will try this one!
Simple and very nice 👍, this about as easy as it gets for a beginner or even skilled craftsman not looking to over complicate things or break the bank. Nice job.
@SEBTECHDIY
4 жыл бұрын
Thanks 👍
@JessyRenae
3 жыл бұрын
Lol with the price of wood right now, I'm guessing it'll break the bank.
@jlane9055
3 жыл бұрын
it's got to be over 200 lbs i don't think so
The moment you accidentally kick the corner of the bed is the moment you fall in love with these kind of the bed design
@MK-qs6os
3 жыл бұрын
Until u smash your shin on the corner 😆
@pepperface2
3 жыл бұрын
absolutely
@MyMathex
3 жыл бұрын
I had a mental image of kicking the corner in the dead of the night and me hopping on one leg and muttering muffled nasty cusses😂😂😂😂😂😂😂😂😂
@ancientpersianempire
3 жыл бұрын
lol i totally agree with you on the other hand i have heard this type of bed has its advantages during exercise events with the ladies !
Looks amazing! Really well done! I can't wait to make this!!!!
This is the first video of these that I think I could pull off 🥳 looks great and sturdy!
Why does it seem like everyone else home improvement store has GREAT lumber and MINE always has shitty lumber? LMAO
@iamlyric5600
4 жыл бұрын
sailing in the same boat here
@therubbermeep7456
3 жыл бұрын
ikr the mcoys in the town next to me has over priced and badly handled lumber/ plyboard but if i drive a hour or two home depot sells better quality wood for cheaper the hell is this bs ??!
@emmanuelcastillo8736
3 жыл бұрын
@@therubbermeep7456 So True!!!
@PhallacEye
3 жыл бұрын
I could make a bow out of all the lengths at my local store.
@haganbilligmeier251
3 жыл бұрын
Yea...lol same
I did it with Woodglut.
@SEBTECHDIY
3 жыл бұрын
Yes? No? Wut?
@figueredoruley8050
3 жыл бұрын
@@SEBTECHDIY I would recommend Woodglut to any beginner or professional like you 🤙🤙
@JetSkiBuyFixPlaySellChannel
2 жыл бұрын
@@SEBTECHDIY spammers
This is so perfect! And the instructions are SO clear! Thank you!
@SEBTECHDIY
3 жыл бұрын
You are so welcome! 😊 Glad you liked! Tried to do it the easiest way possible! 👍
Super simple design super look! This is EXACTLY what I was after. Thx for the inspiration!!
@SEBTECHDIY
2 жыл бұрын
Thank you, you are welcome!
Une bonne vidéo dun bon québécois continue comme ça !
@SEBTECHDIY
4 жыл бұрын
Merci c'est bien apprécié 😊👍
damn honestly inspired me to bulid this !!!
@pennyjimenez1612
3 жыл бұрын
I love this wood working book *TopFineWoodworking. Com* . A few of the topics talked about in the book include wood working strategies, explanation on the development cycles of trees, and various lumber characteristics that craftsmen favor. I also provided my father another copy.
awesome! you make it look sooo easy I can't even hang pictures straight lol
Much easier than another video I watched and attempting to build, looks like material would also cost alot less than the 4x4s in the other video
I want to do this now but I personally would lower the support a little bit just to get the mattress to sink in maybe 1 - 2 inches. What do you think?
@SEBTECHDIY
4 жыл бұрын
It was going to go this way at first, and changed my mind but it's still not to late. I tough it would be easier to changer the sheets if the mattress was flush but i don't think it changed anything. So you could lower the 2x4 and the joist hangers by 1 or 2 inches. I think it will look slightly better! 🙂
@sostrongineedmoreofyourmon974
4 жыл бұрын
xoHiba xo my bed is just like this one where the mattress is flush to the frame. Way simpler to change sheets. Only time the mattress moves is during strenuous extracurricular activities
@dalechell1085
4 жыл бұрын
totaly agree. its horrible that you can see the slats.
@cocacolatgv
4 жыл бұрын
I agree with you, I’m currently building mine and setting it 1.5 inches deep to hide the slats. That’s basically the depth of top horizontal piece. Lucky for me my mattress is light though so my wife won’t have trouble changing the sheets lol
@stillsearchingforsanity4332
3 жыл бұрын
@@dalechell1085 Could one not reduce the frame size slightly but keep everything at the same level? Then you've got the mattress mostly over the slats but partly over the frame to ensure slats will not be visible. Maybe 1" overlap of mattress on frame.
Any idea how I would convert these exact plans into a queen bed, didn't realize this was for a king until I bought all the supplies
@dye182
4 жыл бұрын
Hunter Novak look up the measurement for a queen and then a king mattress and the numbers will tell between that and his specs on the king frame
Simple and yet astonishing.
What a great design! It looks classy and sturdy, plus I love the stain colour. I'm definitely going to use this design to make my own. I'm converting the upstairs garage to a room but I don't want to buy a bed because they're too expensive and don't seem like great quality for the price...anyway, we have a workshop here so why the hell not just make my own?! Thanks for the video and greetings from Ireland !
Rounding over the edges and corners of the frame with a router will make it more forgiving when you bump into it.
@SEBTECHDIY
4 жыл бұрын
It hasn't happened to me yet, but it has happened to my wife several times 😅 Ouch
I'm very seriously considering building this bed frame, but the plans are for king size and I need a queen. Any advice on how to adjust the dimensions for a queen before I get started?
@Eddiefresh
4 жыл бұрын
Here's everything you need to know about bed frame dimensions www.dimensions.guide/collection/bed-frames
this looks sooo good!!! i love the dark color wood. looks so homey and comfy
U made me watch this saying 5 min ....but yeahh m glad I watched it... Nice work... Ur idea got me clicking another idea ... Thanks..
New Subscriber. Could you tell me how much the total cost of this project?
@cocacolatgv
4 жыл бұрын
Thanh Quach I recently bought the supplies to make the frame, not the headboard (I have a different design in mind) and spent roughly $80 on the wood. It all depends on the quality of it. He (and I) used framing lumber which is cheaper but you need to pick the straightest pieces to make the job easier.
Fantastic video and bed. I'm definitely building this!
7 years ago I built a kitchen table 3 ft wide 6 ft long out of 2x6 construction lumber. It turned out great and is just as sturdy today as it was the day I built it.
Why has the internet started putting DIY on woodworking shit. Just call it woodworking, that's what it is.
@DutchessSarahJ
4 жыл бұрын
Tyler Singer I 100% agree. DIY my ass. 🙄😂
@novrandy20
4 жыл бұрын
For people to search their videos 🤦🏾♂️
@tylersinger2401
4 жыл бұрын
@@novrandy20 I think you can still search a video if it says Woodworking
@kitty-vk8ic
4 жыл бұрын
That's one beautiful bed
@royaltonrosauro9711
4 жыл бұрын
jesus has no chills
I had to laugh as soon as he pulled out the tablesaw which most people don’t have. And then the video with on and on and on and on.
@wasteoftimegames
3 жыл бұрын
Chopsaw*
@jacobromero5663
3 жыл бұрын
If you’re looking to “ build “ something diy , you should have a chop saw lol
Beautifully made
Fantastic build. Thank you for sharing.
Good luck with moving that out of that bedroom when you move. 😂
@SEBTECHDIY
4 жыл бұрын
Not really, in fact there is no glue in this build, only pocket screws. Sure you will need to remove the lattice that i nailed on the top, but other than that its 5 big pieces, the 4 sides and the headboard. I think i would take me half an hour to dissasemble it. Remember that its regular wood screw that connect each side to each other, so if you move every years maybe the screws will become loose but it my case i dont plan to move alot. In case screws would become loose, you could add metal corner inside the frame. 👍😄
@jeancarlosgomezbueno6673
4 жыл бұрын
I was thinking the same thing, also the whole thing is probable really heavy
“5 minutes”...GTFOH
@evildoin11
4 жыл бұрын
Lol
@maryolincy332
4 жыл бұрын
it's the length of the video, not the build time
@cocacolatgv
4 жыл бұрын
Mary Olincy it was a joke lol
@boo2952
3 жыл бұрын
Jay be calm
@elthanos879
3 жыл бұрын
Oo Voo Let me build this entire bed to lay in and calm down in 5 minutes. Hold up...
Trying this for our kids frame. A little smaller but very excited to try!
Nicely done. Wish i had the tools like you especially that vacumm attachment.
I also agree that having the slats sitting lower in the frame will keep the mattress in place better! It's still a great build!
This looks awesome man. I think my wife and I are going to try this out!
Your video is what exactly I am looking for.thanks a lot.
Definitely using this method for my bed! Thank you sir.
@SEBTECHDIY
3 жыл бұрын
Simple and sturdy 😉👍
Congratulations on your build it’s been very helpful thank you
Love this!! I think I'm going to build this! Cheaper than buying! Yes, I do have these tools
Amazing! Just what I was looking for to build. THANK YOU SO MUCH!👍☝️
@SEBTECHDIY
3 жыл бұрын
Glad I could help! Thank you ! 😊
great project. Very simple and elegant.
Very nice, simple and good looking. My next bed will be a DIY bed for sure.
@SEBTECHDIY
3 жыл бұрын
Thank you, it was a really fun project! 😄
Love the look, great job!
Super simple and very effective. Good video 👍
My brother and I built this. Thx man 👨 looks awesome 👏
@SEBTECHDIY
3 жыл бұрын
That's awesome! 😄
Love the design, thanks for sharing
It makes me feel like I can do it too. Great video!
Gorgeous!!! It looks amazing
Bravo, beau travail, belle inspiration, je viens d'acheter les matériaux, je commence l'assemblage demain!
Very nice! I'm going to make one just like this! I love it!
Me and my father in law are building this bedframe right now with a few modifications: Using the advice in the comments, the length of the boards are being adjusted and the slats sunken in about an inch so the mattress sits in place instead of directly on top. We’re also cutting out parts of both sides of the headboard to fit in an outlet/usb charger hub. Using a hole saw, we drilled through the headboard underneath the platform on either side so LED light strips can be routed through and assembled underneath to give it an ambient glow. Awesome video!
@SEBTECHDIY
3 жыл бұрын
Awesome, share this project with us i wanna see it! 😊
This was a super super video man so detailed if you would add a floating feature to the based this would be a flawless bed build.. But rarely people take the time to do such an amazing job for a bed where you sped 40% of your life in
Nice job man, turned out awesome!
Awesome! BTW, like your dust/saw dust collection system. Well done on both!
@SEBTECHDIY
3 жыл бұрын
Thank you! 😄 My dust collector is my favorite project yet, and the bed frame is my second! 👍
For a simple construction this bed is very attractive !
Fantastic job ! Sr. Very well explanation !! Thank you.
@SEBTECHDIY
2 жыл бұрын
So nice of you, thanks! 👍
Bien fait. Merci d'avoir partagé.
Super gorgeous! Great work
Wow, that was amazing I love this seriously... thanks for sharing with us...
Love the rustic look.
@SEBTECHDIY
4 жыл бұрын
Thanks! We love it! 😍
Dude! You have golden hands! Respect from Russia!
@SEBTECHDIY
3 жыл бұрын
Thank you so much! 😃
Easy, Simple, Affordable and Perfect
Amazingly beautiful!
J’adore!!!! Je vais essayer de faire ça durant la quarantaine!
I will like to build one for my guest room. Thanks for the video
@SEBTECHDIY
3 жыл бұрын
Any time! 😊
Followed plans, edited to increase height of headboard, and made for Cal King size. Love it. I am so glad I found your video. Ping me for photos.
@SEBTECHDIY
3 жыл бұрын
Wonderful! 😀 I would like to see photos for sure!
Wow vraiment bon travail! Je pense l’essayer moi-même pour mon nouveau matelas dans une boîte. Merci!
@SEBTECHDIY
3 жыл бұрын
Merci Joe 👍 Quand meme assez simple a batir mais surtout très solide. Beaucoup me suggere de descendre les lattes pour descendre le matelas d'un a deux pouce, c'est peu être quelque chose a regarder coté préférence 😁
@stewkatz0
3 жыл бұрын
@@SEBTECHDIY Merci! Très bonne I’dee de le faire descendre d’un ou deux pouces. Ça empêcherait le matelas de bouger. 👍🏼
Nice work. Good bed always makes a perfect reproduction room.
@SEBTECHDIY
4 жыл бұрын
Ahah and you're right, we made this bed in November 2018 and our baby is now 6 months old.
@saeed6811
4 жыл бұрын
SEB TECH DIY That sounds great. Now make a baby bed 😜
Many Thanks for the 5min. video it is very impressive for me to build by my self, im from indonesia
Beautiful!
Nicely done. Easy to follow and nice design too.
@SEBTECHDIY
3 жыл бұрын
Thank you very much! 🙂
Awesome.... Love the finish
Love it! Thanks for sharing.