The music is brain melting.

Great video! I used it as a guide for my own installation on a Mercedes Marco Polo this weekend!

I think i need to relocate my heater for the T4, this seems ideal and space saving

Really helpful 👌 video guys! Thank you so much!

@convertcampervans728

2 жыл бұрын

Our pleasure!

pure class,well done

@convertcampervans728

2 жыл бұрын

Thanks!

Nice install! Think my Crafter 2 will be getting similar treatment👍🏼

@convertcampervans728

2 жыл бұрын

Go for it!

Two things that concerned me about your install. No rust preventing to the holes produced by your self tapping screws. Secondly, if this car drives though any water creek say 400 mil deep the heater will be ruined, due to the water. This is precisely why I installed mine under the drivers seat. It is also worth noting that the combustion intake filter/ hose should be up high to prevent water intake

@sjoerdverwijs6366

2 жыл бұрын

Haven't thought about that yet! Thanks. Now I am definitely going for an under-seat mount of my future heater.

@petecoventry6858

2 жыл бұрын

also many people I've used that tapped into the tank whilst it's been on - but they couldn't

@cameronwood1994

2 жыл бұрын

Also, the mounting bracket is designed to use existing holes I assume for rivnuts, yet they've drilled fresh holes right next to it for tek screws. Also, they haven't even taken the protective film off the bracket!

@haroldvantellingen2185

2 жыл бұрын

i wouldnt also put such a cheap heater underneith a van, haha, how long will it last you think when driving in wet European climate..... Kinda curious how they are after few years, But then, its easy to put new one.

@shavedmonkey9821

2 жыл бұрын

mount the pump in the engine bay...keeps that ticking noise down

OH my God....🤦

Holes cut tek screws used yet I didn’t see any form of sealing around the vent pipes or rust prevention being applied to those areas. Why tek screws rivnuts are more professional. A case of all the gear no idea to me lol

Hi guys great video. Where can I buy the mounting bracket please? Is it something that Autoterm sell?

sorry more negatives not mentioned but pump lookes as if mounted horizontal. its well documented elseware it should be at about 45 degrees output high or pump will wear out pematurely as there will be air at top of pump and no derv there that is its only lube so would be metal to metal causing wear, and bubles in fuel line are more likely as well. maybe it was corrected off picture, but we do not see that!

@happysurfcamper

2 жыл бұрын

I looks to me it is mounted at 15% that’s enough to lube the piston by getting the tiny air bubbles pass the pump. However the rest of the setup is not good to be honesy

That muffler is upside down . The drain hole should be at the bottom.

@petecoventry6858

2 жыл бұрын

But they are apparently pros :D

What screws you using to drill the bracket to the chassis? With a what washer? Thanks

Where do I get the little metal pipe to connect the tank to the fuel feed pipe?

Have a good day sir; You install heater under the vehicle because of the heater sound? And would be any problem if the heater contact with mud,water vs?

That my van

Under seat option for me, you can access the fuel tank from underneath the passenger seat too.

@willpope7517

Жыл бұрын

So no need to drop it?

Very helpful! I made an almost identical installation of a Webasto heater on my VWT6. I found that a lot of noise is coming in through the hot air outlet. Does anyone experience the same? Any ideas on how to reduce that noise? Thanks!

@agnosticevolutionist3567

7 ай бұрын

Stick some toilet paper down the vent ,it should stop the noise

ive basically copied this install on my van , what ive noticed is the how close the heat is directed at the door plastics , its gets the plastics mad hot ! what's your thought on this ? as for me its a concern !

@Heatersandfridges

2 жыл бұрын

I think you must have the airflow backwards. The door card is next to the return air to the heater and that should not get hot at all. The outlet should be in the back of the van usually under drivers seat or around that area. Check you have the heater the right way round.

How much does this cost

That van looks like it may get a rub through the vent tube or maybe I'm just seeing things

Sorry but no ... it may work in dry climates but other than that if there is any snow or got forbid u need to wade through decent puddle u done ... pls don't use self tapping screws into the frame u will rust it... exhaust should go outside of the wehice not underneath...

@megaleadjp

2 жыл бұрын

ya that exhaust pipe needs to be at the edge of van

@happysurfcamper

2 жыл бұрын

Yes did some installs and yes the exhaust like that is dangerous and would not be valid. Also the air intake I would take higher up and with an extra motorbike filter and mounting underneath will give you problems in the long term with moisture and dust. Self tapping screws will cause rust to. Muffler is mounted upside down so it will fill up with water (burning diesel causes water to get out of the exhaust always!) and than it will give error codes until it is rusted trough. I don’t like the setup even they are handy guys

Outsite ?

1:17 theres already a hole under the seat with the rubber plug in so why drill another hole please?

@darrenfrost1747

Жыл бұрын

all the cabling comes up through there

something nobody has commented yet.. how this is installed, the outlet blows warm air inside, the air intake draws from the outside atmosphere in this installation. that is going to make the heater work waaaayy harder to warm air before it is blown inside so in turn is not very efficient at all, nor on fuel. that will dramatically reduce the life of the heater with it working so hard all the time. these heaters are designed as a heat exchange internally, so they are meant to draw internal air in, warm it a little further, and blow it back to inside the vehicle, aka recirculate air. these heaters should only have holes made to the outside purely for the intake and exhaust which are only for the engine to operate.

@waynehopkins5042

2 жыл бұрын

The intake is inside the van in the van step , so all is ok with the installation. The heater is installed as per manufacturers instructions.

Great video , music gets on your bloody nerves.

Is it OK to mount the heater sideways ?

@whatliesbeneathurbanexplor1631

2 жыл бұрын

Yes but not upside down because the diesel will flood onto the spark plug. The bracket is designed and that area for installing a diesel heater

how long do you expect this to last??? its not a good idea to install these heaters outside for obvious reason

@whatliesbeneathurbanexplor1631

2 жыл бұрын

Probably the same chassis but longer

One year later and need a van replacement due the rust in the frame..Also any splash or snow with salt will destroy that in days..

No diesel filer 😬