Dialing in Alignment on Solid Rear Axle Beam Matrix XRS

Автокөліктер мен көлік құралдары

Come as you are, I get my Matrix aligned after months of trial and error.
Dial in your specs using my method. If you lowered your car, these will help you.

Пікірлер: 12

  • @antbankzbruh
    @antbankzbruhАй бұрын

    Love to see more matrix content on our platform 👍

  • @Ma70rk

    @Ma70rk

    Ай бұрын

    Only real ones will understand 🤘🏼

  • @AlexeyOrlov-CINE
    @AlexeyOrlov-CINEАй бұрын

    Awesome video! Very informative. Don’t know any other videos on KZread that give such a thorough explanation of rear shims on a solid rear axle. Glad the rear alignment is in spec now. Go rip it!

  • @Ma70rk

    @Ma70rk

    Ай бұрын

    Much appreciated 🙏🏼 I think alignment/ suspension geometry is too often overlooked. Thanks for watching / support 🤘🏼

  • @PlayinWithMahWii
    @PlayinWithMahWiiАй бұрын

    Awesome vid bro, I have to do something like this with my matrix soon, or just replace the rear axle beam. Someone tried to lift the car with it, and its bent in the middle now, giving me like -10* of camber 🤦‍♂

  • @Ma70rk

    @Ma70rk

    Ай бұрын

    -10° camber!? Your tire like riding on the shoulder? Damn they ignored the big ass hump pointing down? Lmao

  • @PlayinWithMahWii

    @PlayinWithMahWii

    Ай бұрын

    @@Ma70rk Lmao I'm exaggerating, it's probably not that bad but it's definitely off. Especially on the drivers side, just looking at it you can tell it's off. I think I'm gonna end up replacing the whole axle beam whenever i get around to doing the bushings, but I could probably get away with some shims in the meantime. It got bent when I was doing my clutch, told my buddy to go lift up the rear end and instead of using the lift point under the trunk, he put the jack right in the middle of the axle beam. It's bent like a bow now, and is especially noticeable since the TRD sway bar stayed rigidly straight.

  • @Ma70rk

    @Ma70rk

    Ай бұрын

    ​@PlayinWithMahWii yeah once you get the beam, definitely a good time to hit the bushings, might be easier with the beam out too. It's just a process with the shims, gotta get one alignment to find where you are, then shim to correct followed by another alignment to check and correct the front accordingly

  • @PlayinWithMahWii

    @PlayinWithMahWii

    Ай бұрын

    @@Ma70rk Good shit man, seems like I just have to get an alignment that comes with a lifetime warranty, then I can just go back after dropping the beam to get it dialed in for free 👍🏻

  • @Ma70rk

    @Ma70rk

    Ай бұрын

    That's dope! Then you're all set maybe one day make it to cali for toyotafest lol there were only 5 of us there this past weekend

Келесі