Looks really awesome, glad it worked out that well.
@joshuataylor30873 жыл бұрын
Really awesome!! such a good job.
@NelsonCastillo3 жыл бұрын
Very nice robot. Polished.
@taeileom08062 жыл бұрын
awesome!! Thank you
@w2w900 Жыл бұрын
Masterpiece!
@WalkingTomatoman3 жыл бұрын
How did u do the math to know the motor angles for the final position of the operator?
@gokulprasad70493 жыл бұрын
Great video!, Will you be open-sourcing the design?
@tulliocarlassara2093
3 жыл бұрын
Thank you. Sorry, not for now.
@RyanRyan-ym7yi3 жыл бұрын
Nice, Which Software did you use to control 3 stepper motors at the same time?
@tulliocarlassara2093
3 жыл бұрын
Thank you. The software in the microcontroller that drives the motors is the real hard work. It interpolates the step-coordinates that are passed to it. Before there is the software in the pc. It converts the constraints of the trajectory from cartesian-coordinates to step-coordinates and sends them to the microcontroller. All softwares are originals.
@RyanRyan-ym7yi
3 жыл бұрын
Thank you! I have one more question! How can you calculate the arms and forearms of delta robot that makes the moving platform move straight on 2D plane? Do you have any solution? I’m looking for your answer! Thank you!
@tulliocarlassara2093
3 жыл бұрын
@@RyanRyan-ym7yi A succession of points in cartesian coordinates determine the trajectory to be traveled. If you want a straight line, put the sequence of points along a straight line. For each point you then have to do inverse kinematics calculations. Basically you have to calculate the angles of the arms for each point in the sequence. Then the interpolation algorithm will link the results.
@williamhuang53292 жыл бұрын
Hanzhen harmonic driev gear , robot arm gear , over 30 years experience
@gauravgarg88793 жыл бұрын
nice video, can you help me with the relation between linkage length and the arm length and the angles between each motor? also the motors suggested for this mechanism
@tulliocarlassara2093
3 жыл бұрын
Thank you. The length of the arms connected to the motors is 250 mm. The length of the arms connected to the terminal is 500 mm. The motor shafts are at 100 mm from the center and the terminal shafts are at 50 mm from the center. As stepper-motors I used 23HS30-2804s-HG10
@gauravgarg8879
3 жыл бұрын
@@tulliocarlassara2093 thank you sir for your reply.. it helped me a lot... sir i have one request more if you had prepared some documentation regarding it can you share it with me.... my mail id is g.gargoo@gmail.com
@tulliocarlassara2093
3 жыл бұрын
@@gauravgarg8879 I'm sorry, no documentation. But you could find ideas on the site www.sipro.vr.it/en/
@gauravgarg8879
3 жыл бұрын
@@tulliocarlassara2093 thank you sir for helping me a lot
@Robotinnovations7 ай бұрын
very nice work. can you share code
@aquilinogava78962 жыл бұрын
Buongiorno. Il prodotto in video e` acquistabile ? Grazie
@tulliocarlassara2093
2 жыл бұрын
No
@aquilinogava7896
2 жыл бұрын
@@tulliocarlassara2093 Grazie ?
@tulliocarlassara2093
2 жыл бұрын
@@aquilinogava7896 E' un prototipo per uso didattico. Un delta robot di simile fattezza lo puoi trovare ad esempio in www.sipro.vr.it
Пікірлер: 24
Looks really awesome, glad it worked out that well.
Really awesome!! such a good job.
Very nice robot. Polished.
awesome!! Thank you
Masterpiece!
How did u do the math to know the motor angles for the final position of the operator?
Great video!, Will you be open-sourcing the design?
@tulliocarlassara2093
3 жыл бұрын
Thank you. Sorry, not for now.
Nice, Which Software did you use to control 3 stepper motors at the same time?
@tulliocarlassara2093
3 жыл бұрын
Thank you. The software in the microcontroller that drives the motors is the real hard work. It interpolates the step-coordinates that are passed to it. Before there is the software in the pc. It converts the constraints of the trajectory from cartesian-coordinates to step-coordinates and sends them to the microcontroller. All softwares are originals.
@RyanRyan-ym7yi
3 жыл бұрын
Thank you! I have one more question! How can you calculate the arms and forearms of delta robot that makes the moving platform move straight on 2D plane? Do you have any solution? I’m looking for your answer! Thank you!
@tulliocarlassara2093
3 жыл бұрын
@@RyanRyan-ym7yi A succession of points in cartesian coordinates determine the trajectory to be traveled. If you want a straight line, put the sequence of points along a straight line. For each point you then have to do inverse kinematics calculations. Basically you have to calculate the angles of the arms for each point in the sequence. Then the interpolation algorithm will link the results.
Hanzhen harmonic driev gear , robot arm gear , over 30 years experience
nice video, can you help me with the relation between linkage length and the arm length and the angles between each motor? also the motors suggested for this mechanism
@tulliocarlassara2093
3 жыл бұрын
Thank you. The length of the arms connected to the motors is 250 mm. The length of the arms connected to the terminal is 500 mm. The motor shafts are at 100 mm from the center and the terminal shafts are at 50 mm from the center. As stepper-motors I used 23HS30-2804s-HG10
@gauravgarg8879
3 жыл бұрын
@@tulliocarlassara2093 thank you sir for your reply.. it helped me a lot... sir i have one request more if you had prepared some documentation regarding it can you share it with me.... my mail id is g.gargoo@gmail.com
@tulliocarlassara2093
3 жыл бұрын
@@gauravgarg8879 I'm sorry, no documentation. But you could find ideas on the site www.sipro.vr.it/en/
@gauravgarg8879
3 жыл бұрын
@@tulliocarlassara2093 thank you sir for helping me a lot
very nice work. can you share code
Buongiorno. Il prodotto in video e` acquistabile ? Grazie
@tulliocarlassara2093
2 жыл бұрын
No
@aquilinogava7896
2 жыл бұрын
@@tulliocarlassara2093 Grazie ?
@tulliocarlassara2093
2 жыл бұрын
@@aquilinogava7896 E' un prototipo per uso didattico. Un delta robot di simile fattezza lo puoi trovare ad esempio in www.sipro.vr.it
Reprap