Such smoomoth and nice narration. Need a cup of whiskey to go with this tutorial and some country music too
@Offroadfarm1
Жыл бұрын
Thanks for watching!
@spencerb175011 ай бұрын
One of the best tutorials I've EVER seen. Thanks so much for your time and effort put into this video for a axle noob like me. This made my d60 rebuild a lot less daunting to take on
@Offroadfarm1
9 ай бұрын
Thanks for the kind words and thanks for watching!
@JamesLongOnGoogle3 жыл бұрын
This is a great tear down video. I really appreciate you taking the time to shoot & edit. Helped me out a bunch with my Dana 60 hanging under my old Jeep.
@Offroadfarm1
3 жыл бұрын
Thanks for watching
@feed_defend_evolve Жыл бұрын
Building a 4x4 e350 van. This vid is GOLD!
@Offroadfarm1
Жыл бұрын
Thanks for watching
@alexmunich863 жыл бұрын
You sir just gave me the confidence to do my own rebuild. Thank you for the video tutorials!
@Offroadfarm1
3 жыл бұрын
Glad you found the video helpful, good luck on your rebuild. Thanks for watching
@samkorbyn1692
3 жыл бұрын
You all probably dont care but does someone know a way to get back into an instagram account..? I somehow lost my login password. I love any assistance you can give me.
@kristophernicolas5195
3 жыл бұрын
@Sam Korbyn Instablaster :)
@samkorbyn1692
3 жыл бұрын
@Kristopher Nicolas Thanks for your reply. I found the site through google and I'm trying it out now. Looks like it's gonna take quite some time so I will get back to you later with my results.
@samkorbyn1692
3 жыл бұрын
@Kristopher Nicolas it worked and I actually got access to my account again. I'm so happy:D Thanks so much you saved my ass !
@noahgaray79234 жыл бұрын
This is a super in depth video. I will be following along as I replace the Passenger side U joint in my 88 F350s dana 60. Thanks!
@Offroadfarm1
4 жыл бұрын
Glad you liked the video. Thanks for watching
@zachthompson51134 жыл бұрын
going to be doing this on my 81 K30. Mine is not going to come apart this easy. So jealous of you guys that don't have road salt. Thanks for the video!!!!!
@Offroadfarm1
4 жыл бұрын
Thanks for watching and good luck on your project.
@teewoods98463 жыл бұрын
thanks for sharing this video. i appreciate it.
@Offroadfarm1
3 жыл бұрын
Glad you enjoyed it! Thanks for watching
@endless_potatoes2 жыл бұрын
Fancy ball joint remover, nice tip with the castle nut
@Offroadfarm1
2 жыл бұрын
Thanks for watching!
@forrestgumpp68013 жыл бұрын
Great video 👍
@ronsre-creations52894 жыл бұрын
Great Vid !!! I just found that moog makes these lower adjustable king pins for the DANA 60 for first gen dodge's. Their instructions are vague at best. Can you add some detail about these adjustable king pins on your reassembly video. Thanks....
@Offroadfarm1
4 жыл бұрын
I went with normal bottom kingpins when I reassembled the axle. I know this will affect my camber but I don't really care since this truck is not going to be a daily driver and won't see a lot of highway miles. I never could find a lot of information on the adjustable king pin and sadly can't really offer you any advice. Thanks for watching and nice looking dodge
@phantomwalker82513 жыл бұрын
selector switch???.no you dont need remove the screw..
@gabrielarechiga702 ай бұрын
Do you have a parts list with all the parts you used for the rebuild?
@phantomwalker82513 жыл бұрын
chevy used up scale f100 calipers,,instead of f250 calipers..
@naifalshehri78394 жыл бұрын
Hi buddy,im from saudi arabia and i have custom deluxe 30 (k30) with dana 60 front end,can i replace the rear and the front end with the g80 4.10's?,do they fit?
@Offroadfarm1
4 жыл бұрын
I'm not sure. I would reach out to offroad design. They know just about everything when it comes to squarebodys and should have an answer for you. Good luck and thanks for watching
@Mike-xn1bh4 жыл бұрын
@Offroadfarm, thank you for posting this vid! Is the installation procedure the same for the Ford kingpin 60, as well?
@Offroadfarm1
4 жыл бұрын
Mike, it should be very similar. google "dana 60 bible" it has information on all the different Dana 60's
@phantomwalker82513 жыл бұрын
you didnt ruin the bearings,it went no where,,just brake clean then light oil. done..
@Offroadfarm1
3 жыл бұрын
True, I could have just cleaned them. But, I decided to just replace them since it requires a near full teardown to service these bearings and I already had it apart. Thanks for watching
@billhopper89613 жыл бұрын
what model ford did you say that axle is from
@Offroadfarm1
3 жыл бұрын
88 Chevy! Thanks for watching
@irvinroadman5043
Жыл бұрын
@@Offroadfarm1 chevy and dodge dana 60 are the same
@seemslegit1915 жыл бұрын
Do the inside and outside bearings have races
@Offroadfarm1
5 жыл бұрын
Are you asking about the hub? If so, yes. I'm going to reuse my wheel bearings and didn't knock those races out
@phantomwalker8251
3 жыл бұрын
all bearings have races. or ride on hardened surface,like f150 axles bad idea,. & spindle bearings.
@zip78064 жыл бұрын
uhhhhhh. Pressure wash before disassembly...
@Offroadfarm1
4 жыл бұрын
I did pressure wash it twice! Granted it was before I pulled it from the truck. Thanks for watching
Пікірлер: 43
Such smoomoth and nice narration. Need a cup of whiskey to go with this tutorial and some country music too
@Offroadfarm1
Жыл бұрын
Thanks for watching!
One of the best tutorials I've EVER seen. Thanks so much for your time and effort put into this video for a axle noob like me. This made my d60 rebuild a lot less daunting to take on
@Offroadfarm1
9 ай бұрын
Thanks for the kind words and thanks for watching!
This is a great tear down video. I really appreciate you taking the time to shoot & edit. Helped me out a bunch with my Dana 60 hanging under my old Jeep.
@Offroadfarm1
3 жыл бұрын
Thanks for watching
Building a 4x4 e350 van. This vid is GOLD!
@Offroadfarm1
Жыл бұрын
Thanks for watching
You sir just gave me the confidence to do my own rebuild. Thank you for the video tutorials!
@Offroadfarm1
3 жыл бұрын
Glad you found the video helpful, good luck on your rebuild. Thanks for watching
@samkorbyn1692
3 жыл бұрын
You all probably dont care but does someone know a way to get back into an instagram account..? I somehow lost my login password. I love any assistance you can give me.
@kristophernicolas5195
3 жыл бұрын
@Sam Korbyn Instablaster :)
@samkorbyn1692
3 жыл бұрын
@Kristopher Nicolas Thanks for your reply. I found the site through google and I'm trying it out now. Looks like it's gonna take quite some time so I will get back to you later with my results.
@samkorbyn1692
3 жыл бұрын
@Kristopher Nicolas it worked and I actually got access to my account again. I'm so happy:D Thanks so much you saved my ass !
This is a super in depth video. I will be following along as I replace the Passenger side U joint in my 88 F350s dana 60. Thanks!
@Offroadfarm1
4 жыл бұрын
Glad you liked the video. Thanks for watching
going to be doing this on my 81 K30. Mine is not going to come apart this easy. So jealous of you guys that don't have road salt. Thanks for the video!!!!!
@Offroadfarm1
4 жыл бұрын
Thanks for watching and good luck on your project.
thanks for sharing this video. i appreciate it.
@Offroadfarm1
3 жыл бұрын
Glad you enjoyed it! Thanks for watching
Fancy ball joint remover, nice tip with the castle nut
@Offroadfarm1
2 жыл бұрын
Thanks for watching!
Great video 👍
Great Vid !!! I just found that moog makes these lower adjustable king pins for the DANA 60 for first gen dodge's. Their instructions are vague at best. Can you add some detail about these adjustable king pins on your reassembly video. Thanks....
@Offroadfarm1
4 жыл бұрын
I went with normal bottom kingpins when I reassembled the axle. I know this will affect my camber but I don't really care since this truck is not going to be a daily driver and won't see a lot of highway miles. I never could find a lot of information on the adjustable king pin and sadly can't really offer you any advice. Thanks for watching and nice looking dodge
selector switch???.no you dont need remove the screw..
Do you have a parts list with all the parts you used for the rebuild?
chevy used up scale f100 calipers,,instead of f250 calipers..
Hi buddy,im from saudi arabia and i have custom deluxe 30 (k30) with dana 60 front end,can i replace the rear and the front end with the g80 4.10's?,do they fit?
@Offroadfarm1
4 жыл бұрын
I'm not sure. I would reach out to offroad design. They know just about everything when it comes to squarebodys and should have an answer for you. Good luck and thanks for watching
@Offroadfarm, thank you for posting this vid! Is the installation procedure the same for the Ford kingpin 60, as well?
@Offroadfarm1
4 жыл бұрын
Mike, it should be very similar. google "dana 60 bible" it has information on all the different Dana 60's
you didnt ruin the bearings,it went no where,,just brake clean then light oil. done..
@Offroadfarm1
3 жыл бұрын
True, I could have just cleaned them. But, I decided to just replace them since it requires a near full teardown to service these bearings and I already had it apart. Thanks for watching
what model ford did you say that axle is from
@Offroadfarm1
3 жыл бұрын
88 Chevy! Thanks for watching
@irvinroadman5043
Жыл бұрын
@@Offroadfarm1 chevy and dodge dana 60 are the same
Do the inside and outside bearings have races
@Offroadfarm1
5 жыл бұрын
Are you asking about the hub? If so, yes. I'm going to reuse my wheel bearings and didn't knock those races out
@phantomwalker8251
3 жыл бұрын
all bearings have races. or ride on hardened surface,like f150 axles bad idea,. & spindle bearings.
uhhhhhh. Pressure wash before disassembly...
@Offroadfarm1
4 жыл бұрын
I did pressure wash it twice! Granted it was before I pulled it from the truck. Thanks for watching