Dad Replaces Kitchen Sink Soap Dispenser with Glacier Bay Model
Тәжірибелік нұсқаулар және стиль
If you have a soap dispenser embedded in your kitchen sink, eventually you’ll have to replace it. They get a ton of use, so they’ll break. Not if, but when. Or, perhaps you just want to update the look of your kitchen with a new style of dispenser. Here’s how to do it with the a Glacier Bay model.
Product link: www.homedepot.com/p/Glacier-B...
Пікірлер: 24
Thank you, this was EXACTLY what I needed.
@daddoesvideos
2 жыл бұрын
Great to hear! Glad it helped. And thank you for watching!
Thanks! Helped a lot and I even had the same Home Depot special replacement lol
@daddoesvideos
Жыл бұрын
Hahah. Glad it helped!
Is it possible to use the soap dispenser whole for installing a water filter instead. Don't really need a soap dispenser.
@daddoesvideos
Жыл бұрын
Don’t see why not if the hole fits for you want to do.
I was able to unscrew the nut however the bottle is attached to the bolt- any suggestions.?
@daddoesvideos
3 ай бұрын
Hmm. I’m unsure of what you mean. Your old dispenser isn’t able to be removed?
One of the hardest information to find, so, what is the diameter of the threaded neck under ???? No, I don't want to know "standard" or "range" I want the exact measure... simply, my new sink has a 1-3/8 hole that everything I look is too loose because the neck is always 1" . Thanks.
@daddoesvideos
6 ай бұрын
Diameter of this product where the hole is in the counter is 1 and 1/8 inch. Hope that helps!
My soap dispenser won’t come off in the first step you did. How did you get yours off?
@daddoesvideos
2 жыл бұрын
Hey there! You should just be able to twist it counter clockwise. Maybe if it’s on really tight, you might need a wrench and/or you might need someone to hold the other side of it on top of the sink to keep that still. Hope that helps.
@itsmeamc3772
Жыл бұрын
The lock nut is loose but the stupid soap bottle will not unscrew. From topside, I tried turning both ways while I try to hold topside in place with a wrench. Help!!
@daddoesvideos
Жыл бұрын
That’s weird. Sometimes, you have to pull instead of twisting. Maybe give that a shot?
@itsmeamc3772
Жыл бұрын
@daddoesvideos mine is definitely a screw on, came from Home Depot, put in place by a handyman 4 years ago. I tried re-screwing the lock nut in place to hopefully stop any other part from moving while I still used a wrench to hold top in place, then tried unscrewing bottle, but will not budge.
@JH-ss9cs
11 ай бұрын
My nut is frozen, and I'm also having trouble removing it.
My soap dispenser isn’t locked on
@daddoesvideos
3 ай бұрын
Did you tighten the nut underneath as much as you can?
My soap dispenser is leak now how do I tighten it
@daddoesvideos
3 ай бұрын
Which part is leaking?
@afnanj
3 ай бұрын
@@daddoesvideos I figured it out i had to go lefty loosely for some reason to tighten it
@daddoesvideos
3 ай бұрын
Ahh, yeh, that happens sometimes! Glad u figured it out!
@afnanj
3 ай бұрын
@@daddoesvideos thx appreciate it. I also have a leak in the bathroom sink. The faucet is loose and out of place so water leaks into the sink cabinets and if I try twisting it into place I wouldn’t be able to because of its placement. It would hit the wall.
@daddoesvideos
3 ай бұрын
@afnanj should be some kind of nut underneath the faucet that you can tighten. But might just need to call a plumber