I really love and enjoy my CZ 75 PCR . Would HIGHLY recommend it to anyone for conceal carry or home defense. Very reliable and very accurate.

@devildog_iii3492

4 жыл бұрын

It’s my favorite all around/carry pistol for sure

@devildog_iii3492

4 жыл бұрын

For me it’s my carry so I usually clean and lube after every time I shoot it. And do a detailed clean every 1000rds where the entire gun comes apart

Nice pick up....Good stuff....

Very,very nice!!

Pretty sweet! CZC does great work, they worked my 2075 Rami BD and I may pick up one of their PCR's. My Rami has tridium sights which I prefer over luminous sights.

@devildog_iii3492

4 жыл бұрын

Nice! My buddy had a CGW Rami that really impressed me. Been wanting a CZC Rami lately

Damn that's a beautiful gun

@devildog_iii3492

3 жыл бұрын

My favorite

That PCR Custom is TITS!!! My first CZ is a PCR and it made me a better shooter!!! I sold my Glock 19 to buy it and now I own an SP-01 Phantom and a P-07 and love shooting them all. P.S. CZ pistols are $10 more than Glocks but are infinitesimally better pistols.

@devildog_iii3492

4 жыл бұрын

Nice! I’ve kept the 19 haha but u have some good choices from CZ. The phantoms are sweet too

@edwardbennett6479

4 жыл бұрын

549charger Love my CZ’s as well my brother. Enjoy.

Great review. I appreciate that you pointed out the differences from the standard PCR. You mentioned the solid trigger pin, but did you ever find out if the firing pin roll pin is the same weak coiled roll pin used in the standard, or have you replaced it? Thanks

@devildog_iii3492

7 ай бұрын

Thanks. I actually just asked CZ custom again cuz I forgot about the pin if it needed changing or not. P09 I know had an issue w it. I’m gonna do another video soon when I get the Pro-Tek1 in and compare to the custom/stock

@johnmoore8359

7 ай бұрын

I’ll be looking forward to it. Thanks

Good morning from NC.just getting started on shipping for a CZ.don't need a rail .was impressed with the feel of those 75s.what's the deal with the pins?break dryfireing?if I get a regular D model solid pins would be the 1st thing to swap out ?pretty much a must I would t hi k.?.also any idea if the older guns would be any better or worse than newer ones?I'm into S&W revolvers ,& with those the older pre lock models are much better feeling .I get them used so they are broken in some .that always helps I supose.that's a nice gun .if you could let me know about the pins & suggest a good forrum that's probably most of what I'm asking.looking like a lot of cz homework in the near future with these guns.ad old (pre B?right?probably police trade ins?surplus?)it could get complicated quick.last thing ,IF I keep it simple,and to buy a new PCR ,the pins,night sights& metal guide rod are a good thing I'm thinking.like metal.the polymer rods are probably just fine but why would cz put that in a metal gun to begin with?sorry the question is all over the place but on the website I didn't see anything about custom shop.pls get me pointed in the right direction.just held 1st 3(Rami,75 with safety & a pcr.2 days ago...& Never shot one .sooo.a lot to learn I guess.the feel was good

@devildog_iii3492

4 жыл бұрын

Morning! The pins are usually the first to go, especially w dry fire without snap caps. Some put in CGW spring pins or CZC solid pins. There are surplus out there but rare due to imports, but they’re the same $ or more than new usually. I try to stick to CZC pistols and can get them relatively cheap already done on gunbroker sometimes. I usually find them around $800-1000. If u buy from a custom shop they’re around $1200. But u could buy a stock and get parts from CGW or CZC and do work yourself also. I’m a SW fan also and always buy pre lock used whenever I can. Unless they don’t make that revolver wo a lock like my 460.. there’s CZ forum and cztalk.com for good info

@wbwills2

4 жыл бұрын

Devildog III thanks for link to forum & price information.thinking solid pins sound best unless there’s some reason to get the other type. I know me .im not going to go get a snapcap when I get an urge to dry fire some. I’ll check out forum & come up with a plan. & 640 is about as good as a 5 shot gets. I don’t have one but will get one when the time is right.

@wbwills2

4 жыл бұрын

Devildog III dont care for a polymer gide rod either

@wbwills2

4 жыл бұрын

Devildog III CANT REMEMBER WHERE I SAW PCR STAMP. .ill think on it. Was a propionate large font PCR though. Let you know when I remember. Maybe that KZreadrs with the raspy voice. Mr. Firearm or something like that.?. Sounds like a DJ. From the late 70s or 80s. He loves his RAMI. I’m thinking he had it. I’m not sure if Mr. Firearms is his channels name but I think it is

@devildog_iii3492

4 жыл бұрын

When I don’t carry my PCR I’m carrying a m&p 340. Love that revolver. Yea I like the stainless guide rod better for sure. Solid pins are great but some say if u don’t use snap caps it’ll chew up the firing pin, but Idk. Mike w the raspy voice?? Haha yea Mr. gunsngear

Semper Fidelis Marine! This gun has been on my short list for a while. How would this gun fit in bigger hands?

@devildog_iii3492

3 жыл бұрын

Oohrah bro! I’ve got med hands and it’s fucking perfect for me. Bigger hands may be a little small, but the geometry of it may still work out well.. can’t say for sure

@alexandruborodin755

3 жыл бұрын

@@devildog_iii3492 you can buy a mag 16 rds for compact cz. They come with big mag base,like walther ppk has the same longer mag.

@devildog_iii3492

3 жыл бұрын

I usually put my shadow2 mags in it

& PCR.I've seen it stamped in slide in a few pictures.one I held had silver older nub I've heard comes up when loaded,and didn't have pcr on slide.was written on price tag only..LGS employee had no idea what silver thing on top was.I stopped asking him questions at that point.it was in a spot that looked like that's all it could have been to me.anyhow,have a good one & thx for any help or resources.

@devildog_iii3492

4 жыл бұрын

Yea PCR has the little nub as a loaded chamber indicator asked for by the Czech police. I don’t think I’ve ever seen PCR stamped on one, it’s always cz75 D for me

@wbwills2

4 жыл бұрын

Devildog III Looked back on some videos I saved and stuff ,looking for the one that 75 that was stamped PCR. Couldn’t find it. Maybe I dreamed it. I could swear I saw it somewhere. Same gun. I saw some other comments about the solid pins @ prices on guns that have already been upgraded etc. I appreciate all that. I’ll Have a PCR eventually. You can bet on that. They’re awesome. Thanks again

@devildog_iii3492

4 жыл бұрын

Too bad, I was real curious about that haha. Anytime

@alexandruborodin755

3 жыл бұрын

@@devildog_iii3492 yes,right.indicator. you can find it also in full size cz75 bd police.

Really nice pistol-will start looking for one tomorrow-the new carry

@devildog_iii3492

4 жыл бұрын

U won’t regret it.

@markdelgado9995

4 жыл бұрын

Just found a gun shop here in my city that just received 4 in stock today - will be waiting at the door first thing in the morning when they open to get one

@devildog_iii3492

4 жыл бұрын

The cz custom shop or a stock pcr?

@markdelgado9995

4 жыл бұрын

Devildog III it doesn’t say on their website - will find out in about 45 minutes when they open

@devildog_iii3492

4 жыл бұрын

Probably a standard. What’s the price?

Those are 15 round mags my dude. The older 14 rounders have flat (or soft rubber) baseplates and don't have the blue follower.

@devildog_iii3492

4 жыл бұрын

Yea I know. So used to the older ones it slipped and it was too late..

@aaronkeener95

4 жыл бұрын

That was a 40 S&W also

@hoonyur5973

4 жыл бұрын

Kris 9mm Those mags take both 9mm (15rds)/40 s&w (11rds) like Glock mags. The 9mm is engraved on the other side.

Nice piece but CZ needs to do better trigger jobs.

@devildog_iii3492

4 жыл бұрын

Stock CZ? Yea

@treverdavis5881

3 жыл бұрын

The custom shop pcr from cz is a fantastic trigger. I love this gun.

@devildog_iii3492

3 жыл бұрын

Yea it’s my favorite

@FishFind3000

2 жыл бұрын

Most stock triggers all suck unless it’s a revolver in single action or a 1911. Aftermarket triggers are the shit for just about everything.

@devildog_iii3492

2 жыл бұрын

Yep. Actually have an old cz75 w 10k rounds thru it and the stock trigger wore in really nice. But I’m putting a CGW standard package on it anyway.

But why .40?

@devildog_iii3492

4 жыл бұрын

It’s in 9mm. The mags are marked .40 on one side and 9mm on other

@FishFind3000

2 жыл бұрын

The same mag is used for both .40 and 9mm

Hands are dirty n thumb busted. Blue collar guy right here. America

@devildog_iii3492

4 жыл бұрын

The only way

@captainpegs0740

4 жыл бұрын

He's young enough to go to school and get a degree if he wants to. America

@devildog_iii3492

4 жыл бұрын

Well I’m in my late 30s.. but I have a degree anyway

those are 15rd mags

@devildog_iii3492

3 жыл бұрын

Yea I corrected it. Mixed up my P01

@tereztiago9133

3 жыл бұрын

@@devildog_iii3492 i just bought one today because of your review

@devildog_iii3492

3 жыл бұрын

Nice! U get the PCR or custom pcr?

@tereztiago9133

3 жыл бұрын

@@devildog_iii3492 it says cz 75 d with a 2020 mfg date its a pcr

@tereztiago9133

3 жыл бұрын

it has the black trigger