I have a CZ 455 Varmint. My favorite gun out of all the guns I own. Best 22 rifle bar none out of the box.

@coreyd1474

4 жыл бұрын

Yes I have a friend that has a 455 precision trainer and it shoots well. A lot of people surprisingly said their 457 shoots like this. Stick with the 455.

Corey D, I got the same rifle last week,took it to the range this weekend and was printing from 3/4 to 1/2 inch groups at 50 yds. I torqued the action screws to 25 inch/lbs.used CCI standard, Norma USA tac 22, and FGM all 40 gr. CCI did the best, I was so impressed I ordered an MPA chassis for it, hope you figure it out bud.

@coreyd1474

4 жыл бұрын

i'm pretty sure i torqued them to roughly 30 but i'll have to double check. several people have commented about how much that makes a different in the czs. 25 is probably a good place to start.

Thanks for the review, I have a 455 lux in .22mag. I like the 457 a little better. My trigger only adjust weight. I'm trying to decide between the 457 varmint .22 mag and the Henry long barrel frontier.

@coreyd1474

4 жыл бұрын

Well I can't give a a good option on what to get unfortunately because I think I got a lemon. Not worth the price tag IMO

Thanks for the video. I recently purchased a CZ 457 scout and I’m getting about the same with the iron sights. I’m hoping that after adding a scope that’ll improve ( my eyesight isn’t very good I’m in my 60’s ). So far the CZ is one of the better rimfires I own. Like you i like CCI standard velocity ammo.

@coreyd1474

3 жыл бұрын

i'm sure your groups will shrink significantly when you get some glass on there. thanks for watching!

Thanks for a good video. I bought the .457 Royal a month ago. Also didn't shoot too well with CCI but I've had good groups with S&B. I'm shooting subsonic HP though for varmints and its accurate enough to take ear shots or between the eyes at 40m or so. The build quality is something special on these rifles. Just wish we could get the accessories you guys have in the states here in NZ! A 15MOA tactical rail would be amazing. Thanks for sharing your experience bro and looking forward to an update on the grouping!

@claytonmcleod2497

4 жыл бұрын

Hey mate, I’ve got a 457 Royal on layby, are you happy with yours? What was the ammo it liked? S&B??

@coreyd1474

Жыл бұрын

thank you for watching!

@pest_predator_nz

Жыл бұрын

@@claytonmcleod2497 sorry I just saw your message now. Very happy with mine. I've got a few thousand kills to it now. Very accurate. I'm using cci standard velocity now. Perfect.

Yep! Without a doubt don’t worry about group size ‘TIL you’ve shot a brick through it and as already been said STOP cleaning it! You will be surprised at the difference that will make. About the only time I barrel clean my Lithgow is when I put it away for a few months, when I bring it out to play again it gets a good 50+ warming up before I do anything else, I would say good luck but being late to the party I expect you have already got it sorted or I hope so😉👍 kind regards from across the pond.

@coreyd1474

3 жыл бұрын

not exactly comparing apples to apples there witht he lightgow. i've tried basically everything with this gun with the same results. not cz's best effort but i know they make good stuff. thanks for the input!

Good video. Was wondering about the cool down of barrel between tests? Tested 19 different types of ammunition in my 457, landed on CCi copper hollow point copper coated. After break in on bench rest shoots sub 1 min after break in of barrel. The chronograph really tells the story of different ammunition. Used a scale from my archery gear to weigh each round in the box. The best quality for the best price ended up being the Norma. The cci leaves less to clean in the barrel after 400 rounds a day for the last couple days. Thanks for the video Corey.

@coreyd1474

Жыл бұрын

not sure i've ever had a 22 that the barrel even got warm. maybe on a day when its 100 degrees out but i don't shoot then anyway. don't even think the suppressor even got warm. now on a 22 piston its a different story, the can gets ALMOST hot.

Just got a cz457 trainer. The best ammo I used was winchester x22lrpp.was getting 1/2" group at 55 yes. 40 grain 1280 fps.i was surprised since people bash winchester super x. Love it. Have different ammo on order just to see what is best.you need to try different ammo. I do like the cci standard velocity

@coreyd1474

4 жыл бұрын

hard to beat standard velocity

I have an older Brno ( original cz ) and it loves Winchester ammo over anything I have tried

@coreyd1474

Жыл бұрын

thanks for watching

I guess its a function of the ammo. For example, on my 457 Varmint Eley Club [orange box] and SK Match get tighter groups than sub MOA [at 50] when compared to Standard CCI and Federal.

@coreyd1474

4 жыл бұрын

i mean i get that. but if it doesn't shoot target or force OR center x well its not worth it. the whole point of a good barrel is it shoots most types of ammo well. defeats the purpose to have to buy 25 dollar a box ammo to go out and get good results. i already sold it.

Thanks for sharing your thoughts on the rifle.

@coreyd1474

3 жыл бұрын

thanks for watching!

Thanks for the video! I am looking at these pretty hard right now. Those groups are disappointing. I bet you will find something that will shrink the groups.

@coreyd1474

4 жыл бұрын

I was very disappointed myself to be honest

@luismagana9784

4 жыл бұрын

Get the 17hmr varmint

I have an RPR 22 and had nothing but issues with it for about 600 rounds. Tried about 20 different ammo lines and never got it under 1" at 50 even with action torque testing. Installed a GMR 16" barrel and everything was suddenly fixed. Its shooting ~.68" at 50 using SK pistol match, action screws at 30. MV using Magneto Speed is 1075-1080, sorry don't remember the true sd/es. I was looking at the CZ 475 Varmint for a second rifle system because people have been saying good things about out of box accuracy. I wouldn't mind having a second RPR so i dont have to share rifles with my wife, but i don't feel like paying for another GMR barrel to fix issues i know i will have, when i can hopefully get what i'm looking for right out of the box. I appreciate your CZ review as its helping me figure out what i'm looking for in a second rifle system. * had to update this because i mentioned moa but my notes are actually inches.

@coreyd1474

4 жыл бұрын

A lot of people have commented and said theirs shoot the same as this. Save your money and buy a Tikka t1x mtr. Mine is amazing and I'm glad I got rid of my 457 but I understand this one rifle doesn't reflect all 457s

@bigturbobigblocks

4 жыл бұрын

@@coreyd1474 every honest opinion helps a ton. I agree that one can't speak for them all, but if it's common then odds aren't as good as initially thought.

@coreyd1474

4 жыл бұрын

@@bigturbobigblocks the Tikka it's by far the best 22 I've ever shot

@bigturbobigblocks

4 жыл бұрын

@@coreyd1474 have you ever had a chance to test fire a Vudoo? Curious as it has the rem 700 action style. It would make an apples to apples trainer for my 30" 6.5 Creed. Little on the pricey side since the Tika T1x MTR can be acquired with a nice scope for the acquisition price of a Vudoo.

@coreyd1474

4 жыл бұрын

@@bigturbobigblocks na i didn't know you could. i'm just not sure the vudu's are worth the 4000 dollar price tag when rifles like me tikka and other MUCH cheaper rifles will shoot as well. i mean sure its cool to flex on the gram with one but i could never ever justify buying one.

My experiences with CZ 22s, is telling me you are doing something wrong. Try Shooting off a bag instead of the bipod and check your scope installation.

@coreyd1474

4 жыл бұрын

I had my Armageddon rear bag. All scope screws torqued to spec.

@luismagana9784

4 жыл бұрын

Yup check ur scope cuz mine is a god damn tack driver I killed 37 squirrels with mine yesterday

@aaaaa1957

3 жыл бұрын

Luis Magana I’m getting the same as in the video but with just using the iron sights. I’m old with bad eyes so I feel adding a scope will get me much better results.

@MrThfknsamurai

3 жыл бұрын

@@luismagana9784 isn't 37 past bag limit

@BobaFett00987

3 жыл бұрын

@@coreyd1474 try torquing your bedding screws and check the barrel spacing for the freefloat

Good vid man. Try some other ammo's. I had my 457 Varmint out yesterday and was shooting sub MOA at 100 yds.(no wind). Lapua Center X was the best, then Eley Tenex and Eley Match. It doesn't like any of the CCI choices including Green Tag. Some of the SK works well too. I even tried the SK Long Range and it shot no better on steel at 200yds than the others so don't waste your $$ there. I also have a Tikka T1X I've shot side by side with the CZ switching out the scope and it likes completely different ammo. The gun likes what the gun likes. Buy 10-15 different ones and spend a day at the range and have fun. Btw... the Eley Force is designed for semi auto's so don't expect great things out of a bolt gun.

@coreyd1474

4 жыл бұрын

funny you say that i actually sold this and bought a t1x lol its not even funny how much better it is in every way.

I’d like to see what happens when the wind so absent. I have the same rifle and haven’t been to the range yet.

@coreyd1474

2 жыл бұрын

i'm sure yours will be fine. most shoot a lot better than this.

My 457 Varmint will shoot SK Rifle Match .238" @ 50yds and Lapua Center X .129" @ 50yds. At 100yds 1.03" & .617" respectively on a REALLY good day. :) Had to put a Yo Dave trigger spring in and adjusted to 1lbs. Ya gotta find the ammo it likes. I sold mine because I didn't want to pay to have the barrel threaded and the stock is too nice to bang around on barricades in NRL22 so I ordered the synthetic stock/threaded barrel version. Check out my vid on my T1x vs the Varmint.

@coreyd1474

Жыл бұрын

will do.

Not sure whats happened there. Ive got a 455 and shoots 1/2 inch groups all day every day using cci standard. Love my CZ. I get they are different set ups.

@coreyd1474

Жыл бұрын

you and everyone else on the internet

Season the barrel with a dry bore snake once before shooting it and after each 100 rounds for three hundred rounds. It worked wonders for my 457 American

@coreyd1474

3 жыл бұрын

different barrels like different cleaning methods. 100 rounds is too often IMO

Hey Corey, I’ve got 455’s and 457’s and you definitely have to do a barrel break in and sometimes do a lot of ammo testing for your particular gun.

@coreyd1474

Жыл бұрын

eh barrel break in for a 22. im not buying it. MAYBE 100 rounds and a cleaning to get any burs or debris out if there is any.

@irishkelly654

8 ай бұрын

@@coreyd1474 - Agreed...there is no real break in needed for a rim fire.

@coreyd1474

8 ай бұрын

give it a good cleaning and get it conditioned to the ammo you want to shoot and you're g2g@@irishkelly654

Got the same with my new rifle, but after 300 rounds it got to make one hole at 50 meters. You got the trigger behavior and barrel got the lead fouling as it should

@coreyd1474

Жыл бұрын

no it doesn't

I just picked up a 457 Lux in .22LR. Tried finding proper scope rings locally but nothing worked to get me up over the factory irons so guess I’ll have to order something online.

@coreyd1474

4 жыл бұрын

That's what Amazon is for lol

@JWheeler331

4 жыл бұрын

Corey D Of course. Tried to buy local first though. Didn’t work out.

@coreyd1474

4 жыл бұрын

@@JWheeler331 which rings you go with?

@JWheeler331

4 жыл бұрын

Corey D None yet. Looking on amazon at this very minute. Had the Warne Rimfire High rings and they wouldn’t let the Nikon Prostaff Rimfire scope clear the iron sights. Took those back and returned them because they didn’t have any higher rings. I wasn’t wanting to spend 100 bucks on the 419 base but may end up doing that just to be done. Which rings do you have on yours ?

Have you tried different torque settings on the action bolts? CZ rimfires tend to like em "tight". At least, that is my experience with the 5 CZ rimfires that I use!

@coreyd1474

2 жыл бұрын

i tried a few that people suggested but it didn't really make and difference on accuracy. changed the POI slightly thats about all.

@rt66rc86

2 жыл бұрын

@@coreyd1474 Ok, have you tried removing and re-installing the barrel and re-torqueing it to spec? And carefully examining for small burrs? Just tossing out some ideas that have helped solve some accuracy riddles, that might help out!

Does that base pinch to the rail or is there a clamp?

@coreyd1474

4 жыл бұрын

There's a dovetail rail on the receiver it tightens down on

You might try a pressure pad under the barrel near the receiver, but you would need to experiment with that a little. Also some people put a shim behind the recoil lug ( they are a little loose ) to be sure it holds the barrel from moving back. I have the same rifle and it does shoot much better than this. It took several hundred rounds through it before it settled down. Good luck with it.

@coreyd1474

4 жыл бұрын

yea i still have several more ammo types to try. just a little disappointed it doesn't shoot cci std vel as well as my cheaper rifles. nice to have to buy just one type for all rifles.

@lucabrasi5070

4 жыл бұрын

Corey D Also, as some have mentioned, check the torque on the barrel grub screws as well as the action screws. Try shooting off a proper rest . My Varmint just doesn’t do as well from a bipod as it does from a rest with a good rear bag. Mine shoots just ok with CCI SV but , of course, does much better with Sk or Lapua ammo. Seriously, try the pressure pad experiment. I use bicycle inner tube. I found a 2 inch piece about an inch from the receiver did help accuracy, but the size and location of the pad differs rifle to rifle. Glass bedding is always helpful.

@coreyd1474

4 жыл бұрын

yea i'll give that a shot for sure. gonna order some more ammo and get it back out.

Try the Federal Hunter Match 40gr JHP and Winchester Power Points in either 40 or 42gr......... Stop cleaning it...! Stop cleaning it...!! Stop cleaning it...!!! You will notice the groups close up, my rimfire hated the Hornady 30gr v-max's when new (averaged 1.7MOA), now at roughly 800rnds (last cleaned at 200rnds) it shoots 5 shot groups at 50 about the size of a horse fly (about 0.5MOA)...!!! Have patience and don't write it off too quickly...!!

@coreyd1474

Жыл бұрын

i'm gonna clean it MORE since you had to take time to say stop cleaning 100 times.

Do a follow up video if you send it in. I would like to hear the results.

@coreyd1474

4 жыл бұрын

will do. Thanks for watching.

I just got a CZ 457 and had the same results as you did. It will not outshoot my Ruger Precision Rimfire. I bought this gun as an upgrade to my Ruger and so far am not happy with it at all.

@coreyd1474

Жыл бұрын

don't let the fanbois read your comment your you'll be flooded with "must be you, my CZ.... shoots 1/16th of an inch at 200 yards" HAHAH

It is a very nice rifle and nice after Mkt. Bolt CZ’s have beautiful stocks. Amazing you have a match barrel and usually a tighter chamber so CCI STD. probably not the right size for your rifle for 1/2” groups. I would consider putting at least a 25 power scope on this rifle and lower the scope rings ie(1/8” above barrel),get a quality 20MOA rail (DIP RAILS online are excellent), and use a quality bench rest or bag and adjust the trigger to around 1 lb. or less for bench. You have to try more quality ammo I have at least 16 kinds of .22 ammo and my CZ455 likes Eley Match, SK LONG RANGE probably the best but I shoot 100yd. & 200yds with CZ’s & Anschutz MPR 64with Weaver T-34 scope. I am sure you can get sub MOA with that rifle as CZ’s are extremely accurate

@jimhamilton3544

4 жыл бұрын

What is weight.of your rifle with your scope ? Can you get the rifle from CZ with the AMERICAN stock ? Sorry does this rifle have the match chamber ?

@coreyd1474

4 жыл бұрын

not sure of the weight have to check the specs on their site. no, the only one that comes with the match chamber is the MTR.

Where can i get a bolt handle like that? And do they fit for all CZ models 17hmr?

@coreyd1474

3 жыл бұрын

i believe i got this one off of anarchy outdoors or area 419 i'd have to go back and look. well worth the money tho the factory one is tiny.

@dcjavv7361

3 жыл бұрын

@@coreyd1474 i need one for my 17hmr, can you find out where exactly u got it from and get back to me. Thanks

Ely did shoot really well from this gun but your right hard to find. Cci we can even get at the gas station.

@coreyd1474

Жыл бұрын

yea but it still hasn't come down in price all the way to what it was BC.

Does the 457 use the same magazines as the 452 and 455?

@coreyd1474

4 жыл бұрын

i dunno about the 452 but if it uses the same mags as the 455 then yes they're the same.

@williamrauch4464

4 жыл бұрын

Yes

Where did you get the stock bag?

@coreyd1474

9 ай бұрын

long time ago midway usa had them.

My 457 lux with Aguila super extra ammo and an Athlon talos 3-12 x 40 does sub .80 all day at 100 yards!

@coreyd1474

4 жыл бұрын

i'm sure it does

@pwn3426

4 жыл бұрын

@@coreyd1474 oh it does.

Need to figure how much of that price was fit and finish.

@coreyd1474

2 жыл бұрын

mostly finish if i had to guess

What height rings are on this?

@coreyd1474

4 жыл бұрын

.90 i believe

You try the sk match in the red box it shoots tight in my Cz 457

@coreyd1474

2 жыл бұрын

both flavors of sk have been my go to in my vudoo but didn't get to try it in this.

Length of pull is the distance from the middle of the trigger to the buttstock. The word you're looking for is travel.

@coreyd1474

4 жыл бұрын

yea you're right. hey at least you got the idea lol

First of all thank you for this video. That gun looks amazing. I wished you had more types of ammo to shoot with but that's ok you used CCI standard which is what I mostly used. I am disappointed with the butt stock myself as it is angled down. Would've been better straight. Overall you persuaded me to wait and think about this. I was planning to buy this gun next week. I wonder why it isn't that accurate as its talked up to be. If the ruger precision does a bit better accuracy wise I don't know if I will buy this gun. Though I saw another video with the pro varmint very accurate. What do you think?

@coreyd1474

4 жыл бұрын

I can say that OVERALL the Ruger shoots more ammo better but as you said I have a small test group. Knowing what I know now and having both I would go with the rprf. My personal opinion

@bad_vaporizer

4 жыл бұрын

@@coreyd1474 I really wanted this gun. I already have the rpr but I totally thought the cz would out shoot the rpr. I mean even though you only shot with 4 types of ammo the cz should have done amazingly with CCI standard.

@coreyd1474

4 жыл бұрын

@@bad_vaporizer that was exactly my thoughts. I have roughly 10k though the rprf

@bad_vaporizer

4 жыл бұрын

@@coreyd1474 this may be off topic from this cz video but maybe if I want tighter groups I can upgrade my barrel on my rpr. Do you know any proven barrels for the ruger 22lr that I can look at and maybe not be too expensive?

@bad_vaporizer

4 жыл бұрын

Actually I just saw your video about your shaw barrel upgrade. It already answered my question. Thanks

So the Rugger it's more accurate than this one ?

@coreyd1474

3 жыл бұрын

I'd take both of my rugers over this one any day

Q love it thanks

@coreyd1474

4 жыл бұрын

Thanks for watching

You also need to clean the bore between each type of ammo and shoot 10 rounds for fouling with each type of ammo

@coreyd1474

3 жыл бұрын

yea i've learned that. i give it 20-25 fowling just to be safe

Hi. Like your videos Would be cool if you made a THLR style video of a range day with the 22lr rifle setup. Mvh. Kristoffer Skjelbred NORWAY

@coreyd1474

3 жыл бұрын

thanks for watching!

I know you were doing tests but if you are really trying to get accuracy now try torquing the action bolts. Mine were less than 10 in lbs. I torqued it to 15 IN lbs now its shooting around 1" groups at 100 with SK Red Box

@coreyd1474

4 жыл бұрын

i've tried different torque settings it makes zero difference. i highly doubt yours shoots that well at 100.

Are they factory pillard?

@coreyd1474

3 жыл бұрын

nope not this one

Don't give up on the gun yet. Maybe you have a bad barrel. Call CZ-USA and tell them your accuracy problem. They may be able to help you. And BTW, I purchased a CZ-USA 455 Varmint fluted barrel and my CZ 457 American really improved from a 3/4" shooter at 50 yards to a 1/2" at 50 yards. I have two CZ 457 American one to hunt and one for benchrest shooting. The hunting one is about a 5/8" @ 50 yards and the other one is a 1/2" shooter. Also I glass bedded the action and made a difference in accuracy in both CZ 457 American. I am very happy with both of mine. Sorry for the long comment. :-)

@coreyd1474

4 жыл бұрын

Glad to hear you've had such good luck with yours! I'll probably try a few more types but overall it's not as fun to shoot or as accurate as my rprf. Thanks for the feedback!

@chaguie07171959

4 жыл бұрын

I would take the area 419 base off and use dovetail rings because once I did that on my rifle it shot better. There’s something about being as close to the action without placing foreign parts that makes for better accuracy. The reason I am suggesting this is because I tried this myself on my rifle and it shot better. Try it you have nothing to loose. The rifle may very well be a shooter and the scope bases may be the culprit why is not shooting close to 1/2" @ 50 yards.

Hey Cory, I just ran into this video while looking around for CZ 457 videos. Just got a 457 American in .22 mag and wanted to compare notes. After watching this video I went and watched all your other newer ones. The groups you shot with the Tikka and the Bergara told me the story. I know you already sold the CZ and you wont want to hear this but your groups were not the CZ rifle's fault. I can see that from the groups you shot with your other newer rifles. I'm 65 years old and have been shooting since I was 8. One thing that most people don't understand is that most all of the rifles made today are a lot better than the shooters. And so is most of the ammo. Yes some ammo will shoot better in some rifles. That's only because of harmonics. Ammo manufacturing is so good these days that the only variable is velocity from one shot to another and it's not much (but it makes a difference. You're not alone. I see this all over KZread. Mostly horrible groups. At 65 I'm a lot worse than when I was younger, mostly my eyes and concentration. I can concentrate and repeat it just right about 65-75% percent of the time now, that's it. But, early on I learned a lot from the best of the best benchrest shooters and I'll repeat, lack of consistency of the human being on the rifle is the source of most all fliers, vertical strings, open groups, etc. I have not seen any rifles in years and years now that shoot worse than 1.5 MOA. They don't exist anymore. Manufacturing is that good! That said, these days with me being a 65-75% shooter, I can see that, @ 100 yards, 1.2-1.5 MOA is the BEST I will get with my CZ457 .22 mag on a consistent basis out of 5 shot groups. But I know it's me, not the rifle. When I do my part I can get .8 MOA. LOL! When I was young I could get .8 MOA with iron sights @ 100 yards - not anymore! Shooting 5 shot group after 5 shot group is REALLY hard to do well. Every single shot made has to be made exactly the same way as the last. Rifle fit to the individual is critical as well. If it doesn't fit you right you will shoot worse than with one that does. That doesn't mean that you will shoot really well with one that fits either. Yes, if the rifle does not fit you right you will shoot worse. But then again, with that fully adjustable stock on the Bergara that notion is out the window. You seem to shoot a lot. Get to know people at your range that can shoot really well. Have them shoot your rifles. Ask for help. I always did and it paid off in spades. All the best..

@coreyd1474

4 жыл бұрын

thanks for the input!

Most CZ 457 rifles come with an accuracy target showing how the weapon performed at the factory. If you can't match or beat those results, then the disappointing test runs are on you. One bench shooter reported that the 457 varmint precision trainer out performs the CZ 457 varmint mtr-which to his knowledge has never won a national match

@coreyd1474

3 жыл бұрын

this one didn't come with any targets or performance indicator of any sort.

If I understand MOA correctly, none of the groups are close. MOA for 50 yards would roughly .50 or 1/2 inch. 1 inch groups would be MOA at 100 yards. That being said, there is a lot of variables to consider before you right this off as defective. Try more ammo. Eliminate as much shooter error as possible. May even look at increasing the trigger weight as you may be jerking the trigger. Just my opinion.

@coreyd1474

4 жыл бұрын

no i agree. after i filmed these i messed with just a few more types and upped the trigger after a few other suggested it but the results were exactly the same, most were worse actually. just doesn't shoot well.

Did this gun ever start grouping better?

@coreyd1474

3 жыл бұрын

Nope. Sold it. Didn't have the energy to keep messing with it.

@PopShot76

3 жыл бұрын

@@coreyd1474 I hate hearing that because that gun was gonna be my next purchase. I have watched most of your videos, would you take the Savage chassis gun over the CZ then?

This is an older video so unsure of the status of your rifle. If you still have it, I will offer some thoughts to improve accuracy. These things worked for me. First know that some rifles need some tinkering to get optimum accuracy. BTW I own the same model and I consistently get sub MOA from plinking ammo. First thing I did was to scrub the barrel. It was filthy. I use JB Bore Paste on all my new rifles because it acts like a lapping compound. The CZ barrels are generally in good shape since they are hammer forged and don't need to be lapped but the paste helps. Anyway I kept up with Wipe Out and Accelerator, and Rimfire Blend and brushing (nylon) and patches until it was clean. This took a long while. Next I put a 12oz trigger spring in it and adjusted down to less than one pound. The trigger weight greatly affects accuracy. Next I adjusted the action screws to 20 in lbs. using my torque screwdriver. I shot 100 rounds of Federal Range Pack (NOT value pack) because it does not have any lube on it, just a lead round nose ammo. Then cleaned the bore, then another 100 rounds, then cleaned, then another 100 rounds. Lastly I got a pack of shims from Trigger Shims and put a 0.003" bolt shim in. SAAMI headspace is 0.043" and the 457's all seem to measure out to be about 0/046". Use a bench rest without the bipod, and start at 25 yards. CCI ammo is known to have a thicker rim than other brands. The rim thickness can affect accuracy. The Diamondback is a good scope but gives parallax down to 25 yards only. No offense but I would adjust how you got that mounted. Good luck and I hope this helps.

@coreyd1474

Жыл бұрын

got rid of this thing long ago but thanks for all the info!

@cacinaz8802

Жыл бұрын

@@coreyd1474 Sorry that it did not work out for you. I meant to tell you that CZ chambers their 22LRs according to CIP specs, the European equivalent of SAAMI. I have asked them for the chamber dimensions of the 457 but it seems to be a closely guarded secret - I suppose for competitive reasons. Looking at the CIP diagram suggests that the chamber is more like the American Bentz chamber - not as tight as Match but better than Sporting. The headspace is still listed at 0.0429" however. Best regards.

@RealHankShill

10 ай бұрын

@@cacinaz8802no secret chamber specs. Theres tons of .22 chambers and charts online with all their dimensions including CIP.

How can the stock be free floated....

@coreyd1474

4 жыл бұрын

its not but the barrel is.

Varmint vs the synthetic? I can get a 457 synthetic for $550.

@coreyd1474

3 жыл бұрын

i would choose neither. many other better options out there for around the same money.

@richardrounce7138

3 жыл бұрын

@@coreyd1474 Which rifle would you recommend? Looking for a bolt action for target and hunting.

@coreyd1474

3 жыл бұрын

@@richardrounce7138 tikka t1x or b22

I`ve never seen one of these CZ457 Varmints shoot bad. I own several. I think the problem here is, its the indian, and not the arrow.

@coreyd1474

2 жыл бұрын

i love when i get these comments because you can spot a fainboi easily. people focus on "their" brand and forget to watch the rest of my videos where .2" groups are achieved with the same indian just a different bow. thanks for watching!

Should have got a CZ457 MTR. Match chamber on that one.

@coreyd1474

3 жыл бұрын

yea i would have liked to but i couldn't find one with a threaded barrel and i need that.

Verygood

@coreyd1474

Жыл бұрын

thanks for watching!

Nice attempt. If you are looking for accuracy, shoot good ammunition. Personally, I’ll use CCI SV to get on paper then switch to Lapua Center X. Ammo consistently is the only way to test your rifle. Experiments with two unknown are a waste of time and money.

@coreyd1474

4 жыл бұрын

yea i understand where you're coming from. however quality barrels should shoot *most* ammo *well.* my rprf shoots several types of ammo at MOA or better. from cci std vel to expensive shit like eley target. But like you said i still have several different types of ammo to try and the really good stuff. thanks for the input.

@stuartbrown9307

4 жыл бұрын

Corey D I’ll respectfully disagree. I consistently see people shooting CCI SV with poor results, 3/4” to 1” @50 yards. That’s not to say they don’t have some holes touching, but the ammo is terribly inconsistent with flyers opening the group. Spend the bucks for a couple boxes of good ammo, you will be surprised what your rifle is capable of. Great gun with poor ammo yields poor results.

@coreyd1474

4 жыл бұрын

@@stuartbrown9307 you're definitely right about std vel. wildly inconsistent.

@muddyh2o2init44

4 жыл бұрын

Should you have too? A $500 rimfire should shoot period! Guys are getting better groups from $200 plastic marlins..

@coreyd1474

4 жыл бұрын

@@muddyh2o2init44 my rprf shoots circles around this gun. I definitely got a lemon

Where did you get that cheek bag and patch? Fellow Ohio shooter here.

@coreyd1474

4 жыл бұрын

I got that stock bag off midway. i think its their brand bag. sorry i'd post a link but the video would probably be taken down. The patch is from my old guard base , 178th in springfield.

@richfarmer5044

4 жыл бұрын

@@coreyd1474 thank you, I love that patch hopefully I can find one some day. Really enjoy my 457 but accuracy is lacking but that will all change with the Bartlein barrel.

@coreyd1474

4 жыл бұрын

@@richfarmer5044 more people have said theirs doesn't shoot well than have said it does. pretty surprising

@richfarmer5044

4 жыл бұрын

@@coreyd1474 yes been surprised but with a little work I am hoping to make it a shooter.

@coreyd1474

4 жыл бұрын

@@richfarmer5044 Good luck, hopefully you can get it down to be a solid shooter.

you have extrapolated what the group would be at a 100 and put it down as the 50 yard measurement. How else can you fit a 2" group inside of a 1.5" circle. The groups still suck but they are half the size of what you have written down.

@coreyd1474

4 ай бұрын

you think you're the first person thats pointed this out before i noticed?

Leave it fouled then those fouled groups are really good. Try to break it in more😊

@coreyd1474

3 ай бұрын

22 break in isn't a thing.

Just use one ammo rated below 1100 fps. Solid lead.

@coreyd1474

3 жыл бұрын

oh if it were only that simple

Well something is off. It's either you or your particular 457. I have seen at least 15 videos of the 457 in different styles. Mostly in the pro varmint. And these groups are more than twice what they should be. Hopefully you have just not come across the right ammo for your gun. But in all the other videos even the bad ammo shoots much better than your are getting. P.S. make sure all your screws are tight. The 2 by the trigger and all scope screws. And yes I have a pro varmint that shoots 5/8s. If you got the gun new it should have come with a proof accuracy sheet showing what it shoot at the factory.

@coreyd1474

2 жыл бұрын

yea this definitely isn't par for the course for cz. now that i think of it i don't believe it came with a proof sheet. i probably got a counterfeit one LOL

Ya i would have thought that CZ would have shot better. my next 22 rifle will be a CZ. So to me uh now what?

@coreyd1474

4 жыл бұрын

buy a tikka t1x mtr. you won't be disappointed

Cheers Mate!

@coreyd1474

4 жыл бұрын

Thanks for watching!

Ok , I dont know how you shoot but here is something to try . Bracket the target with your crosshairs . Example : vertical crosshair on the left side , horizontal on the bottom. Adjust scope for bullseye . This gives you a very repeatable sight picture and takes your individual sight picture error out of the equation. Shifting sight picture accounts for most bad groups when using equipment that is capable of very good results ... the other factor wind ..... well we cant have it all can we.

@coreyd1474

Жыл бұрын

thanks for watching

Gave me . 25" groups at 50 yards.

@coreyd1474

3 жыл бұрын

what gave you that

I’ve heard numerous people say the new 457 isn’t as accurate as the past models for some reason.

@coreyd1474

3 жыл бұрын

yea surprisingly a lot of the people commenting have said the same thing. but there is some people who were super butthurt LOL

@nebraskaman8247

3 жыл бұрын

Lmaoo...that’s bc everyone’s so dang sensitive now days. I’m thinking about getting a tikka and getting McMillan to our stock on it/bed the action.

@coreyd1474

3 жыл бұрын

@@nebraskaman8247 yea i had no idea how angry people get over 22LR when i started making videos for fun. everyone's "30 year old ....... with ...... ammo and a 3-9 scope shoots 1/10th inch at 100 yards" lol. can't go wrong with a tikka i love mine. bad ejection system though.

@nebraskaman8247

3 жыл бұрын

I heard that about tikka 😢.

@coreyd1474

3 жыл бұрын

@@nebraskaman8247 mine started to have issues after about 2k rounds. the spring wears out or bends or something

I have a 457 - agree with great trigger and I love the short bolt throw. Good video - thanks. My 457 is in an MPA chassis and I am getting better accuracy than you. Try changing your torque settings for the action screws.

@coreyd1474

4 жыл бұрын

yea i haven't messed with that too much yet. Although i can say i'm not willing to spend 1200 on a chassis for a 450 dollar 22 LOL but hey if you can, more power to ya! Thanks for watching.

@CokeMk7

4 жыл бұрын

I am as well. Mines in a Manners PRS-1 and im getting very respectable accuracy from it

@coreyd1474

4 жыл бұрын

@@CokeMk7 i sold it and bought a tikka t1x mtr. couldn't be happier with the tikka.

@CokeMk7

4 жыл бұрын

@@coreyd1474 nice man, my uncle runs the Tikka and he loves it. I wanted a lightweight set up so i have the match barrel from Proof research and that might be why my groups have shrunk. I only ran the factory barrel for like 2 months and then got rid of it

@coreyd1474

4 жыл бұрын

@@CokeMk7 would you say the 600 for a barrel was the worth the price for accuracy gain?

I wont this gun and how much

@coreyd1474

3 жыл бұрын

i think it was around 500 usd

try some eley tenex, works for me

@coreyd1474

4 жыл бұрын

too expensive for me LOL

There are a hundred modern 22's out there that will consistently shoot better than these targets. It can't be this is the limit of the CZ457. I'm a Savage shooter, and all three of my Mark IIs will shoot .5 inch or better, often much better, at 50 yards with CCI std vel just about every time. I watched your Tikka video and you got similar results. It's not the rifle; you should evaluate your entire setup including how you interface with it. Are you using a rear bag? How's your follow through? I'm guessing but the groups look a little like you're giving up on the shot at trigger time, not following through. If the platform were steady, CZs should do .5" at 50 yards with standard velocity ammo. It would be helpful if you showed yourself shooting a few shots from this rifle. But personally, I don't see the open groups as the rifle's fault.

@coreyd1474

4 жыл бұрын

oh look ^^^^ another my gun shoots 1/2 inch all day guy. why would you buy 3 mark IIs if the first one shoots as good as you clain?

@RetiredFE

2 жыл бұрын

@@coreyd1474 I'm with him. Got 2 Savage Mark II's and can get .5inch groups with CCI SV all day. Sounds like you can't take any constructive criticism.

This rifle have a problem,oh it,s a cz 457,i testing 6 cz 457 and thr 6 dont want grouping.

@coreyd1474

4 жыл бұрын

yea i think you're right. at least this one anyway.

You shooting same round during fouling shots as you are when shoot for groups

@coreyd1474

3 жыл бұрын

this rifle isn't capable of shooting any better.

@ultraclassicdude

3 жыл бұрын

I am shooting the mtr version tryin to find out what ammo it likes best

@coreyd1474

3 жыл бұрын

@@ultraclassicdude center x is probably a good place to start

Federal premium match target

@coreyd1474

3 жыл бұрын

know anyplace to get it LOL

Man, you kept the muzzle part out of view most of the time. That makes me a little claustrophobic.

@coreyd1474

3 жыл бұрын

gotta keep things interesting

@liedebunker1253

2 жыл бұрын

@@coreyd1474 But that's not interesting. That's agonizing.

@coreyd1474

2 жыл бұрын

@@liedebunker1253 gotta keep things agonizing.

That’s the first negative accuracy review I’ve seen on this rifle. I would love to pull the trigger on a vudoo, but they are too much money.

@coreyd1474

4 жыл бұрын

I was surprised too. Most people that have commented said theirs shoots like this one did. Yea have to take a loan out for a Vudu lol

your ammo is not the problem. You have a walking scope or try NOT using the bipod and use a sandbag. Those groups will tighten up IMMEDIATELY. That CZ is a friggin' tack driver.

@coreyd1474

3 жыл бұрын

sure many of them are, but not this one.

@johnroberthanna1623

3 жыл бұрын

@@coreyd1474 : I'm not buying that for a minute. For the 15-20 I have shot or owned or watched being shot there hasn't been one, not one, with the problems you are having. I really don't believe you have a dog.

@coreyd1474

3 жыл бұрын

@@johnroberthanna1623 ok

my cz 455 with a sporter barrel shoots better groups than that, so obviously you need to venture into the setup of the rifle before doing an honest review

@coreyd1474

3 жыл бұрын

Oh is that what I need to do? Rather than taking a rifle off the shelf and testing how it shoots for people who are looking for out of the box accuracy?

There must be something wrong sir, I've never seen a cz .22 shoot that bad. I think your stock screws are either too tight or too loose. Try different torque settings while you are at the field.

@coreyd1474

4 жыл бұрын

yea i'll give that a shot. torque settings on stock screws is a rabbit hole i really don't want to go down. from what i've seen it doesn't really make a difference in group size just moves the POA up/down

@lastlogona6235

4 жыл бұрын

@@coreyd1474 You are both right and wrong, normally, the tighter the screws are the higher POA and vice versa. Lots of stocks are very hold sensitive, how hard or loose your grip is makes a difference. But if the stock screws are too tight the barrel might not free float. If the screws are too loose you might get unpredictable barrel vibrations causing an uneven spread. Sorry for my English 😂 but stock screws and a free floating barrel makes a lot of difference. Given that the ammo you are using is a kind that your barrel likes. Nevertheless a bedded stock will always improve accuracy.

@coreyd1474

4 жыл бұрын

@@lastlogona6235 yea i'm just going to have to mess around with it. i know they're not tight enough to make it not free float i ran a dollar bill down the barrel just to verify. i THINK they're set around 30 ft/lbs but i'll have to double check and give it another shot.

My 457 Lux shoots much better than that, CCI St velocity will group under 1/2" at 50. Fed GM ULTRA MATCH will do 1/4 at 50 consistently. Every 22 has a favorite food. Just have to find it.

@coreyd1474

4 жыл бұрын

ended up just selling it. bought a tikka t1x mtr

get rid of that rail and get some good rings, talley, warne etc. I have a cz 452 american and its a tack driver with cheap ammo. I bought a set of rings from pyramid air guns that works real well on my cz

@coreyd1474

3 жыл бұрын

i'd have to disagree, area 419 makes some of the best stuff out there.

Try SK rifle match

@coreyd1474

9 ай бұрын

i have many times. thanks!

O - H...

@coreyd1474

Жыл бұрын

i-o

I was honestly a bit nervous when he wanted to chamber a live round at his home....

@coreyd1474

3 жыл бұрын

did you peepee in your pants a little?

O H......

@coreyd1474

2 жыл бұрын

io

1" at 50 yards isn't 1 MOA.

@coreyd1474

7 ай бұрын

ok.

@irishkelly654

7 ай бұрын

@@coreyd1474 - Sorry if I offended you but that is a fact. 1 MOA at 50 yards is 1/2 inch. 1 MOA at 100 yards is 1 inch.

@coreyd1474

7 ай бұрын

yea its been discussed about 5000 times lolololol @@irishkelly654

👌😀❤️👍🍻🍻🍻🍻🍻

@coreyd1474

3 жыл бұрын

thanks for watching!

Had to stop watching was getting a headache, hold the camera steady for god sakes!

@coreyd1474

4 жыл бұрын

How do you hold the camera for your KZread videos?

@hoggravyandchitlins

4 жыл бұрын

@@coreyd1474 Sorry didn't mean to come off like an ass, but it's frustrating, you have some great content, but when the camera is moving around that much it's really hard to watch. I'd get a tripod and just set it to a spot that covers the details your discussing. If you have to zoom just do it as smooth as you can. Please take it as constructive criticism.

@coreyd1474

4 жыл бұрын

@@hoggravyandchitlins no doubt! I actually did put it on a tripod for my last few videos LOLOLOL but I agree with you

Dude you have a 1k piece of CZ percession

@coreyd1474

4 жыл бұрын

its trash. i sold it and bought a tikka t1x mtr

@homesteadmike1120

4 жыл бұрын

@@coreyd1474 how does this compare to the Tikka T1x? I am trying to decide between the cz457 varmit and the Tikka??

All your fouling shots were better than the test shots. What does that tell you. Relax, make you first shots count.

@coreyd1474

3 жыл бұрын

Thanks for watching!

Stop cleaning

@coreyd1474

4 жыл бұрын

stop cleaning

KZread Safety Police here - Please remove the mag, open the bolt, and put your chamber flag in, ESPECIALLY after having a live round on the table.

@coreyd1474

3 жыл бұрын

KZread independ fact checkers determined this to be false information your comment has limited visibility

Ohio state woot woot

@coreyd1474

3 жыл бұрын

at least they're playing football again.

You are shooting junk ammo some of the worst you can get I can shoot one hole at 50 with my cz at - one I think you are like one of my cousins you are in love with ruger and besides I don't think you are all that good of a shot and nobody builds that in a gun you need a lot more practice sorry!!!!!!.

@coreyd1474

2 жыл бұрын

you let me know when you've got some time to meet up and we can see whos a better shot. have a terrible day.