In this video, I'll show you how I like to cut edges and wrap them when doing a bulk install. Follow us on Instagram / the_ppf_academy
Жүктеу.....
Пікірлер: 41
@mikesanchez1428 Жыл бұрын
my man....monetize...free money for your yearly vacations...thanks for the great videos boss!
@jesseb25862 жыл бұрын
Thank you sir. I am wrapping nothing but corners all day and this video has been very helpful .
@pstiikkreefing8937 Жыл бұрын
As an installer hearing the squeak from you cutting is so satisfying and shows experience
@cameron19882 жыл бұрын
Thank you for the tips. Getting ready to ppf my car.
@DankyMurphy Жыл бұрын
great video, i just wanna know how you did the back corners behind the hood, I was doing a miata 2022 and had a hard time getting back there due to the windshield plastic panel being in the way and rubbing against the film
@jesseb25862 жыл бұрын
My favorite part of this video is the looooooong selfie at the end....
@richardmash7570 Жыл бұрын
Thank you for the video brother ...question ?...what extension tip do you have on your propane torch ???
@notbabyrodney70402 жыл бұрын
How do you wrap them on the headlight corner or fender next to the a pillar.? There’s no way to use your fingers to pull it back.?
@smookee4082 жыл бұрын
Wow what is that blow torch heat gun you’re using?
@zsbalak3 жыл бұрын
What kind of scissor you use Sir? :)
@JBIRD575 Жыл бұрын
Can you shrink window film with that propane tip ???
@deannewberry5628 Жыл бұрын
Okay dude where did you get the heat gun thing I have never seen that
@tillman904 Жыл бұрын
Can you send a link to that attachment you have on your propane tank I want one just like it.
@lestermccracken78572 жыл бұрын
Nice slayed back presentation. I will be using XPEL and It was evident that you did not use a primer nor alcohol to tack the PPF. So, is your method heat only?
@PaintProtectionFilmAcademy
2 жыл бұрын
We will rinse the slip with tack solution and let it dry if we have time.
@superdetailing53562 жыл бұрын
Hey there,,, Amazing video!!!! What would be a good cutter for PPF?
@PaintProtectionFilmAcademy
2 жыл бұрын
We use NT Blades from Amazon. BD2000
@jasonlee56273 жыл бұрын
What kind of scissors is that? Where can I buy that? Looks awesome, good job.
@davidl7459
3 жыл бұрын
Those are fiskars and they are amazing. They can be purchased at fabric/art supply stores
@thegooddoctor1
2 жыл бұрын
Fiskars 199800-1001RazorEdge Fabric Shears/Seam Ripper for Tabletop Cutting , 5 Inch On Amazon prime $13.22 Just cut and paste the above description and it will pull it up.
@justuskerstner2104 Жыл бұрын
Where do I get those scissors ??
@music-wd4ed11 ай бұрын
Hi can you tell me please what is the knife you use ?
@Nissan370_z Жыл бұрын
once you lay the edge down go over it with silicone and that keels it from unpealing
@vipinsk79704 жыл бұрын
Hai sir myself vipin a wrapper in india, i have a question to you sir. Is that a good idea to use raw water instead of isopropyl as tack solution. Especially doing in Optic shield ppf...
@ryanb7110
2 жыл бұрын
I think there is a reason they use isopropyl
@PaintProtectionFilmAcademy
2 жыл бұрын
Staright water works. Alcohol/water mixture gives better results and it also has some lubrication to it.
@francarlena86043 жыл бұрын
Have you ever used a blade to make cuts on the panel or body of a car? I recently discovered splicing cuts on my Supra and the PPF looks pieced together. I was told cuts on the paint of the car will always be there when PPF is installed. Is that true??
@stephenwhite5444
3 жыл бұрын
Yes, when the installer doesnt know how to do it properly.
@francarlena8604
3 жыл бұрын
@@stephenwhite5444 lol this is the same answer I’ve been getting everywhere else. Well that guys been fired. He’s paying for buffing and fixing all the cuts he did. Getting it redone by someone else. Thanks for answering me. Appreciate it.
@stephenwhite5444
3 жыл бұрын
@@francarlena8604 glad to hear they are taking ownership of the work and having it fixed! A lot of shops wouldnt.
@francarlena8604
3 жыл бұрын
@@stephenwhite5444 thanks! It was either coming to an agreement of stepping up to pay for the fix or a bad review.
@@PaintProtectionFilmAcademy What is that orange stuff wrapped on the head of the heat gun? Would love to get that on my heat gun. Thanks in advance.
@njoyabertrandkinyui33902 жыл бұрын
Waow great
@chrisflux573 жыл бұрын
At 0:44 on the corner of the hood I noticed that the way the film has been cut it there is no film to heat and wrap around the corner point. It seems it will just be folded over along the two edges. Could you explain why this way was chosen and not the way you demonstrated? Many thanks
@edfaizal80
Жыл бұрын
That’s a pre cut ppf. A type of ppf that is cut by a machine according to the car type. I’ve used this type of ppf on a Mercedes a45s. More expensive than hand cut.
@Yorkiepoocharlie4 жыл бұрын
I don’t know if the corner details are awesome.
@DavidNovaa Жыл бұрын
You can't wrap ppf edges like vinyl
@user-xg7qu7ep8o Жыл бұрын
what brand of scissors do you use, could not find anything similar ?
Пікірлер: 41
my man....monetize...free money for your yearly vacations...thanks for the great videos boss!
Thank you sir. I am wrapping nothing but corners all day and this video has been very helpful .
As an installer hearing the squeak from you cutting is so satisfying and shows experience
Thank you for the tips. Getting ready to ppf my car.
great video, i just wanna know how you did the back corners behind the hood, I was doing a miata 2022 and had a hard time getting back there due to the windshield plastic panel being in the way and rubbing against the film
My favorite part of this video is the looooooong selfie at the end....
Thank you for the video brother ...question ?...what extension tip do you have on your propane torch ???
How do you wrap them on the headlight corner or fender next to the a pillar.? There’s no way to use your fingers to pull it back.?
Wow what is that blow torch heat gun you’re using?
What kind of scissor you use Sir? :)
Can you shrink window film with that propane tip ???
Okay dude where did you get the heat gun thing I have never seen that
Can you send a link to that attachment you have on your propane tank I want one just like it.
Nice slayed back presentation. I will be using XPEL and It was evident that you did not use a primer nor alcohol to tack the PPF. So, is your method heat only?
@PaintProtectionFilmAcademy
2 жыл бұрын
We will rinse the slip with tack solution and let it dry if we have time.
Hey there,,, Amazing video!!!! What would be a good cutter for PPF?
@PaintProtectionFilmAcademy
2 жыл бұрын
We use NT Blades from Amazon. BD2000
What kind of scissors is that? Where can I buy that? Looks awesome, good job.
@davidl7459
3 жыл бұрын
Those are fiskars and they are amazing. They can be purchased at fabric/art supply stores
@thegooddoctor1
2 жыл бұрын
Fiskars 199800-1001RazorEdge Fabric Shears/Seam Ripper for Tabletop Cutting , 5 Inch On Amazon prime $13.22 Just cut and paste the above description and it will pull it up.
Where do I get those scissors ??
Hi can you tell me please what is the knife you use ?
once you lay the edge down go over it with silicone and that keels it from unpealing
Hai sir myself vipin a wrapper in india, i have a question to you sir. Is that a good idea to use raw water instead of isopropyl as tack solution. Especially doing in Optic shield ppf...
@ryanb7110
2 жыл бұрын
I think there is a reason they use isopropyl
@PaintProtectionFilmAcademy
2 жыл бұрын
Staright water works. Alcohol/water mixture gives better results and it also has some lubrication to it.
Have you ever used a blade to make cuts on the panel or body of a car? I recently discovered splicing cuts on my Supra and the PPF looks pieced together. I was told cuts on the paint of the car will always be there when PPF is installed. Is that true??
@stephenwhite5444
3 жыл бұрын
Yes, when the installer doesnt know how to do it properly.
@francarlena8604
3 жыл бұрын
@@stephenwhite5444 lol this is the same answer I’ve been getting everywhere else. Well that guys been fired. He’s paying for buffing and fixing all the cuts he did. Getting it redone by someone else. Thanks for answering me. Appreciate it.
@stephenwhite5444
3 жыл бұрын
@@francarlena8604 glad to hear they are taking ownership of the work and having it fixed! A lot of shops wouldnt.
@francarlena8604
3 жыл бұрын
@@stephenwhite5444 thanks! It was either coming to an agreement of stepping up to pay for the fix or a bad review.
What kind of heat gun is that Ron?
@PaintProtectionFilmAcademy
4 жыл бұрын
www.amazon.com/gp/product/B01HB1ACAS/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
@TayErnie
4 жыл бұрын
@@PaintProtectionFilmAcademy What is that orange stuff wrapped on the head of the heat gun? Would love to get that on my heat gun. Thanks in advance.
Waow great
At 0:44 on the corner of the hood I noticed that the way the film has been cut it there is no film to heat and wrap around the corner point. It seems it will just be folded over along the two edges. Could you explain why this way was chosen and not the way you demonstrated? Many thanks
@edfaizal80
Жыл бұрын
That’s a pre cut ppf. A type of ppf that is cut by a machine according to the car type. I’ve used this type of ppf on a Mercedes a45s. More expensive than hand cut.
I don’t know if the corner details are awesome.
You can't wrap ppf edges like vinyl
what brand of scissors do you use, could not find anything similar ?
Where can I get those scissors?