Cut/Gloss Comparison With These Top Shelf ONE STEPS!! Part 1! CUT Factor!
Автокөліктер мен көлік құралдары
This video compares these fantastic one step polishes. One step polishes are pad dependent. surround yourself with a few quality pads up and down the aggression scale, grab of these one steps, and you are in business!
3D ONE Hybrid cutting compound and finishing polish accelerate polishing performance. It has nano ceramic alumina abrasives that easily correct paint scratches by using a DA or high-speed rotary polisher. 3D One is a unique product: apply on a cutting pad to remove heavy scratches and then apply on a finishing pad to deliver an exceptional high gloss finish. It’s easy to use easy to clean up and it leaves the perfect finish every time. It works best when applied in a shaded area, but it is also sun-friendly.
3D One....www.amazon.com/s?k=3d+one&i=a...
SONAX Cut & Finish is an innovative polish with an intense abrasive effect for quickly eradicating defective spots, such as dust occlusion, paint overspray and sanding marks following repair spraying. High abrasion with simultaneous good degree of shine, workable for a long time, with outstanding wipe off feature. Ideal for polishing sanded down surfaces. Removes sanding grooves made by P1500 abrasive paper. Silicone-free.
Sonax Cut & Finish...www.amazon.com/s?k=Sonax+cut+...
The Last Cut is designed by a detailer for detailers and body shop users. Versatility is key and this product gives its user full control over aggression/finishing ability based on pad choice. Its main purpose is to remove scratches and swirls while leaving a glossy finish on light or dark colored painted/clear-coated surfaces. On harder paints, its one step capabilities can be explored. Best results are achieved using a Dual Action or Rotary Polisher. This Silicone free formula contains no fillers and is body shop safe.
The Last Cut....theragcompany.com/products/th...
Koch Chemie Fine Cut F6.01 - Fine polishing compound, silicone-oil-free
Intelligent machine polish of the latest generation with unique aluminium oxide quality. The intelligent grain size ensures very quick, complete removal of wash system scratches and similar traces of use and gives the paintwork a long-lasting deep sheen. Sanding marks left behind by 2500 grade sanding media are removed effortlessly. Fine Cut F6.01 is therefore ideally suited for perfect reconditioning of medium to heavily weathered paintwork. Perfectly coordinated for the treatment of scratch-proof paint.
Koch Chemie F6 01........www.amazon.com/s?k=koch+chemi...
LVR 500 Flawless Cut was designed to work flawlessly with the new age of Dual Action Polishers, Rotaries and Buffers. LVR 500 Flawless cuts was designed to be very user friendly and work with the pad you are using. For a heavier cut, use a firm foam pad or a wool cutting pad. For a medium or lighter cut, use a Uro-Fiber Pad or a Green Better Edge Light Cutting Pad. This incredible formula cuts lightning fast and stays incredibly wet longer so you can really work the paint. LVR 500 Flawless Cut has zero dusting for a quick clean-up saving both time and money!
LVR 500 Flawless Cut....877askxtreme.com/product/lvr-...
Training Session At Apex Detail!! .......apexsurfaceprotection.store/
Data sheet and resource page for products by Henry Freeman! docs.google.com/document/u/0/...
Follow Apex Detail on INSTAGRAM for more exciting projects!!
/ apexautodetail
apexautosurfaceprotection.com
Apex Detail Support Group (FaceBook) / 946245059134747
#onesteppolish #paintcorrection #autodetailing
Пікірлер: 147
What is YOUR favorite One Step?
@TheAverageJoeX
2 жыл бұрын
Big Fan of 3D One. I have the TW but haven't had much time behind it yet.
@MrLIVELINESOLUTIONS
2 жыл бұрын
Sonax EX 04 06 with a medium orbital
@knightautopcd
2 жыл бұрын
Our fav one step is Angelwax Regenerate- we hope you’ll include it the next comparison of one steps
@mggtz
2 жыл бұрын
Brian, have used the Oberks polishes?
@engenheiromateus
2 жыл бұрын
Saitlab PASL 20 VR.
3d all day, best product, great cut, easy wipe off, no dust, and long working time
Great video, Brian. I've used 3D One Step and achieved excellent results. It's nice to know that you guys use this product too. I'm reassured that I'm doing the right thing.
I really like the KC F6-01. Just did a white focus with it. Did a great job. I have 3 of those 5 and like them all!
Hello Brian, I have a 2016 deep ocean Blue Silverado that I bought used in 2019. I noticed after purchase, the paint on the drivers side front/back doors looked dull. After taking it in to my dealership for service, I found out the truck had been re-sprayed! After watching some of your awesome videos on wet sanding and correcting, I decided to bite the bullet and tackle the paint. I wet sanded with 2000, then 3000, used 3D one and a orange pad from lake country. After sanding the front door, my wife said I was crazy, I really thought so too! But, after buffing it out, all I can say is it came out amazing! I just wanted to thank you very much for making these videos, it really pushed me to jump in and go for it!
Thanks Brian, I used Flawless Cut yesterday, but yes, 3D One has more horsepower to it and I will be using that more. 👍🏼👍🏼
Interesting video, looking forward to seeing the next one 👍✌️☮️
I just did my c7 corvette using 3D One & Uro-Fiber 50/50 pads. It had light swirls & a couple light scratches. It came out near perfect.
I think they all did great I used most of these products and as Brian highlighted that it depends on the situation type of clear manufacturer standards weather and so on As usual outstanding job Brian 👌🏼
Nice to see the shop manager make an appearance to check in on the work ;)
Brian your vids are so informative. 🥇🏆 Big THANKS you for your time and effort. Now on the topic: By far my favourite 1 step product is 3D ONE (thanks to you ... of course LoL). Never tried the Koch Chemie F6.01 but I’m always listening what you have to share with us, so I’m considering the option to buy it and test it.
Great review. I have the XS and 3D1 which are both great. The last two looked like they worked the best.
Great video B, thanks!! You got to review the cordless DeWalt polisher for us B, thanks!!
One steps can do great jobs. I love one steps and I always go over the same place 2 or 3 times. Normally I use a microfibre pad.
Hopefully before winter kicks in, I’ll give it a go. At least on just a small area in case I fail lol.
Thank you for your video. Now I’m using the turtle’s hybrid wax&ceramic, the result is excellent removed swirls and micro scratches easily and makes the paint surface real shine. I hope you could make a video about all the turtle’s hybrid products how they work. Cheer
That Koch Chemie is no joke.. TLC would be the runner up, I’d say. Great video
3D one is my go to
My favorite overall one step is 3-D 1 for its versatility, however looking at the koch chemie products they are extremely impressive. I see the shop manager at 11:10 approves. Great video Brian, looking forward to the others series
@TheCarDetailingChannel
2 жыл бұрын
I want to pick up some 3D one from Carzilla. Decent for light swirl removal/ paint enhancements? How about dusting and sling? I use Gliptone precision cut nano ceramic for 1 steps but I’m not happy with the dusting
@AnteekeBro
Жыл бұрын
@@TheCarDetailingChannel Not sure if you ever tried it yet but 3d One is super low dusting, if any. Cost effective and you don't need much after the first pass of polish. But contains some fillers so if ceramic coating a vehicle may not be the best choice, I'd go with F6
I think the F6 looks the best but I'm so intrigued by the 3d one step products
Sonax 0505 on a buff and shine uro finisher mf pad is my favorite go to. It’s worked on pretty much every paint, minus gm black of course lol
TLC! I like that DeWalt!!
3D1 is my favorite
3-d-1 is my favorite. What other kind of pad would you use to do it in one pass
3D 1 by far. Just purchased "CSI Ceramic X to try. Any thoughts on this?
Awesome video and product review good friend. Wow videos like the original s when ur channel started.suprised no 1 and done.b well good friend
@apexdetail85
2 жыл бұрын
Thank you so much 🙂
Thanks B! I've been looking at the DeWalt cordless. But seeing it in use.. man that thing is enormous!! Pictures don't show that scale. Close to the size and weight of the old school big rotaries! 😕 Would love a review!
@corrybowers5078
2 жыл бұрын
I have the DeWalt...LOVE it
@jdisdetermined
2 жыл бұрын
@@corrybowers5078 Right on! I have the v1 and v2 of the SPTA cordless. v2 is a *huge* improvement. Either going to try the XCE or the DeWalt next. Do you do full corrections with it? Is 2 batteries and one charger enough?
@apexdetail85
2 жыл бұрын
I enjoy it...but it has some weight to it.
@corrybowers5078
2 жыл бұрын
@@jdisdetermined yes it's all I use for a 5" DA. As for 2 batteries being enough...it all depends on how much work is required. I have a lot of batteries as well as a fast charger. That being said normally just two batteries cycled works for me.
Koch Chemie F6⁰¹ did a pretty good job 😃
Nice work, i have a question can you advice what is the best iPA 99% dilution to be safe on the paint to use it as a cleaner between polishing steps not harming surface because im confused 50/50 with water or 30 , 20 ... procet alcohol with water? Many thanks
Hey Brian, in my opinion the Koch Chemie dida much better job on the panel. Great videos, i enjoy them All !Thanks
Would you compound isolated scratches 1st & then go into a 1 step on the rest of the vehicle? Or 1 step then attack the scratches?
Griot's FCC on a buff n shine 50/50 pad.
Can you add a polisher details and microfiber polishing pad links
KC micro imo.never tried yet but planning on it.
Great vid B. For me it’s almost head to head between TLC and KC. A little bit more gloss with TLC and more cut with KC.
Can I used Koch chemie and 3 d one
I believe the TLC and Koch Chemi are virtually tied for removal and clarity. I will have to watch on my 4k TV to verify. I have used TLC and used it with those 50/50 microfiber pads. I had very hard Ceramic clear coat on my car and the combination finished down very well. I Car Pro Clear cut first then TLC with 50/50 pads. Car shined like no tomorrow. But I am VERY impressed with Koch Chemi.
Koch Chemie F6.01 👌🏼 Would love to see Rupes DA Fine included in your next round of top 5 One steps.
What does it mean when they say body shop safe?
I thought the 59/50 microfiber was an aggressive pad. What pad do you use that is what you consider aggressive? Thanks
@apexdetail85
2 жыл бұрын
Woolpads, Microfiber cut, and foam cut padsa are much more aggressive.
do you sell the towel you are using for the wash process?
Hey Brian how about trying out this product that I just saw online it's call cerm x by csi
Kock chimie every day in my Arsenal 🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾
From my eyeballs, KC edged out TLC
Did you use the same pad for the whole hood? And if so what’s your cleaning method
@apexdetail85
2 жыл бұрын
Yes. Wash, clay, panel prep.
Are you going to review the new Scholl C-rock ceramic coating?
@apexdetail85
2 жыл бұрын
Its now on the list.
As a Brit, I came in to this one expecting the Koch Chemie to be the best and I believe that's what I'm seeing, although it's close with TLC. When it comes to gloss I am expecting the Koch Chemie to be the winner, I'm about to go over and watch that. I use Koch and Scholl S20 Black as my go to options and I find then really comparable.
why u dont compete the rupes uno?
Gotta try the rupes uno protect and the yellow rupes
@apexdetail85
2 жыл бұрын
Another good option.
3D Speed. Can you do a video showing a DA with a Wool pad. Thanks Brian
@apexdetail85
2 жыл бұрын
On the list.
@charlesarmstrong3536
2 жыл бұрын
I believe 3d speed is a great all in one with a really good wax in it, but it is different from the one step polishes here. 3d speed leaves a wax on the paint 3d one and the other's in this vid leave no protection, so you hsve to apply a layer of protection after the one step polish.
Can you do a review on Waxedshine One Hybrid and Cut?
@apexdetail85
2 жыл бұрын
On the list.
Is one and done better than 3d one?
Can you please recommend a good panel cleaner? I am too nervous to use the IPA at home mixture , due to the possibility of softening up the clear coat.. Don't know if that's true. ahah..
@dustin3700
2 жыл бұрын
Gyeon prep is what brain seems to use alot, I also use it. The other option would be to use N-914 @8:1 which is what I've used on vary soft clears before coating.
@apexdetail85
2 жыл бұрын
Gyeon Prep and IGL Precoat are my 2 favorite.
@reza_dc2
2 жыл бұрын
@@apexdetail85 Thanks 🙏 I’ll pick some up.
I also hate the dust! 😆 The most I can tolerate is whatever Megs M110 might throw out. I was pretty hot and heavy with the 3D last year, but I've let myself reach for the Jescar line more and more. I find that I can usually get where I need with their Medium Polish without having to finish down. I've also been experimenting with the Optimum line. Pretty unique. I've done one complete vehicle with Intensive Polish, which did a killer job cutting out defects, and leaving a glossy finish. There have been other times where I got a lot of marring from it, but Hyper Polish was the better choice in that situation. I'm getting rid of all my Rupes, Menzerna, and some 3D stuff. Time to make space for the sake of space.
@bbdetailing9123
2 жыл бұрын
Hi Dan.
How u liking the Dewalt?I know u loved it when I brought it to the shoo
@apexdetail85
2 жыл бұрын
I really enjoy it!.
Gday mate from Australia. Wonder of you could try S20 Black, Sonax Perfect Finish at all???? Very great video as always. Well done.
Best one for stubborn strong clear?
@apexdetail85
2 жыл бұрын
Sonax Cut and finish.
wondering have u tried any blackfire products?
@joefro9473
2 жыл бұрын
Those are CRAP !!!!!
Brian what is the DeWalt polisher you are using?
@apexdetail85
2 жыл бұрын
Yes! A heavy beast!!
@kenwithrow5157
2 жыл бұрын
Planning to attend your training man!
Malco tru polish
How do you clean the urofiber pad?
@jdisdetermined
2 жыл бұрын
Like normal. A spray of cleaner, quick brush and blowout between passes.
@apexdetail85
2 жыл бұрын
I use compressed air.
@jdisdetermined
2 жыл бұрын
@@apexdetail85 Did you stop using the cleaner and brush before you blow them out B? I switched to that method after seeing you use it. It's more time consuming than just quickly blowing them out, but it's definitely a better clean.
Why not just tell us which one is the top three are the best why do I wanna watch you messing around with eight or 10 one stabs you’re the expert go through the top three or four and we trust you and tell us which ones the best
Just wondering what you think of manzerna?
@apexdetail85
2 жыл бұрын
Another great option.
@bigdogbulldog9912
2 жыл бұрын
@@apexdetail85 i love the 400 ,its my go 2
F6-01. Clearly.
The DeWalt is the winner 😂👌🏻
Not Fair! You used F6-01 from Koch Chemie, It is a "only cut" compound, not a one step product! Koch Chemie P6-01 is the one step product, the one that also contains enhancing gloss finishing ingredients.
Fix the volumes PLZ! Intro's fine then volume gain falls off a cliff only to have the ear drums pierced when the ads fire off. Uggh, love ur content, but a deal breaker's a deal breaker.
Damn that's one big ass polisher...lol
@apexdetail85
2 жыл бұрын
It has some weight to it as well.
I'm surprised that T.W. one and done didn't make it
@cesars7860
2 жыл бұрын
Brian said he's out of it and it's a little difficult for him to get, that's why it wasn't in this comparison. He'll probably include it in his next video.
@apexdetail85
2 жыл бұрын
I ordered more....on the way.
How you like the Dewalt
@apexdetail85
2 жыл бұрын
I really enjoy it.
@ejg34
2 жыл бұрын
@@apexdetail85 thanks for the response
How is that cordless dewalt threatening you so far?
@apexdetail85
2 жыл бұрын
Excellent!!
@bbdetailing9123
2 жыл бұрын
It's a nice machine, especially for the price
No Griot’s? 😞
@apexdetail85
2 жыл бұрын
Next round...there are too many to choose from.
@ryanpaul5604
2 жыл бұрын
@@apexdetail85 my thoughts, so many to pick
Maybe pick up a body camera
One pass aint cutting it! ;-)-
@apexdetail85
2 жыл бұрын
Not on this panel.
2nd
1st
@aliaskink
2 жыл бұрын
There's Rosy Palm!
3D one is my go to