Anthony as always, I very much enjoy your videos. Excellent work. It never ceases to amaze me on how great the Uno Protect and Bead Maker looks, it looks so much nicer than any coating.

I’ve been doing this one-step paint correction since I’ve watched your first video with Levi regarding this. It’s superb result and easy to apply for a beginner like me. 👍🏼

This tutorial was awesome, you always explain step by step.

And a nice graphic finish on this video, kudos to the editing crew

I really enjoyed the length and knowledge of this video.

Anthony is always good vibe 👍🏾

Just buffed a 2013 Honda pilot using Uno protect with a griots Garage G9 and a microfiber polishing pad.Wipe down with bead maker is so fun!The customer swore it was repainted!This works kids..😎👍

Love the energy!

I love the lighting

Holy smokes. Paint on daily driver could really use this you make it look so easy!

fantastic results

Wow the outcome was incredible. I'm getting ready to polish my new Tesla as well and wondering about the decision to use the wool pad as opposed to a foam pad(polish or cutting)? My paint doesn't have any water spots but mainly looks a little cloudy in areas(white paint). Thanks for any help and keep up the amazing work!

I really need to try uno protect now, I love bead maker but this combo is phenomenal. I know the customer paid for gloss and slickness but did you use MDR to remove the minerals before polishing? With those etched in you did phenomenally with just the one step! I always say worst part of polishing is putting on the pad 🤣. The rest is therapeutic

Can't deny results

I'm going to have to try this.

I noticed you didn’t tape headlights or plastics, is there no worry of staining with uno protect like other compounds?

Will you guys every make a Polishing kit that includes all the basics like you just showed?

Another amazing tutorial rag company! Quick question, wouldn't it be better to apply bead maker after the polish and wipe with a microfiber towel? Wouldn't the polisher take the bead chemical away if applied prior to polishing?

I cannot wait to protect the daily before the snow hits here in the upper rockies! Until then I am blazing through the Griot's spray on wax until its gone and back to Bead Maker next year.

Just wanted to ask, how much for a job like that. New subscriber here. Great content!

I do think a water spot remover would have been worth while. I've had good results with carpro spotless. A few years back I was on vacation and the place I was at had sprinkers that nailed my black car on day 1. Baked in the summer sun all week and wouldn't wash away once home. I ordered spotless based on some reviews and by the time product arrived the spots had been on the car for 2 weeks, cooking in the summer sun the whole time. Spotless removed every spot and it was near instantaneous. I don't remember what I was running for protection at the time but I think it was just chem guys butter wet wax.

Given those water spots on the paint I would have hit the roof glass with a used pad. Otherwise a great combination and appreciate the owner loaning it for the paint enhancement

Can I still add a ceramic coating after uno protect? What about bead maker? Combo? Or should I use rupes 2 step or different 1 step before coating?

Okay, I also own a black Model Y. Time to buy this shit, cuz my car has never looked this good

Can obsessed garage drying aid be substituted for bead maker with the same results?

I’m kind of new to all this. What’s the big differences between Uno Protect and the DA Fine Polish Compound?

Could this accomplished with technicians choice ceramic spray detail?

Do you blow out the pad after each section? Also what is the best way to clean the yellow wool pads after use? Cheers

How long of protection are you looking at with this combo?

Most products come out gloss & slick ( I just use beadmaker) but how long does this combo last? After the 1st wash beadmaker slick is gone which doesn't matter to me because after every wash I'll go over car with beadmaker. My point is why do I need anything else if I cannot benefit from longevity?

4:34 - everytime I need to apply paste in this way? Or only first time to impregnate polish pad?

I think 3d all in one the same as uno protect. Sickness easy to come off and protection.

And the Rupes Protection doesn’t stain the plastics?

Can you do a video on UNO advanced?

Help me out here. I don't understand how this process works. Your spraying Bedmaker, on top of another product that has dried and created a film on the panel and it is going to go through Uno Protec bond to the panel, and create a higher shine and sickness. It seems it would work better if you remove the Uno Protec, then add Bedmaker ??? Please explain

Can this process be done with any one step polish… like Koch Chemie?

Can i substitute bead maker for dream maker (i already have the dream maker)? Thanks

So after all this beautiful work, can you also apply ceramic coating?? 🤔🥳

@NipponStiqqyPaint

Жыл бұрын

Nooo0oOoooooö

Fantastic tutorial. I do have to ask, who in the world applied that beadmaker label on the IK and after how many adult beverages 🤣🤣

@Detailpops

Жыл бұрын

@@theragcompany hey brother ! I usually have to follow with a foam when I use rupes wool, does using a polish like uno protect counter that since it’s not real aggressive?

Why did you taped anything ? Does the uno protect doesnt stain anything ?

Can this be done outside in sunlight? Im a mobile detailer

Where can i get that merch? That blue shirt is what I need to buy.

That was great..do you always use a wool?...I see most people using foam .what's the difference ?thank you

@DetailsNMe

11 ай бұрын

Wool is going to give you more cutting ability…the foam pads are less aggressive and geared more towards polishing and sealing….

playlist of the music?

I wonder if Levi and Morgan get royalties everytime this is shown on youtube?

So I’ve tried this but with the blue wool pads I feel like I have even more fine scratches then I did before…any advice. I may not have worked it in all the way or maybe I used too much product. Idk😅🤷🏻‍♂️

@NipponStiqqyPaint

Жыл бұрын

It happens with something as aggressive as the coarse wool. Just finish out with a yellow or white pad. Good luck dude

Did I miss something or was there no before and after shots?

would you suggest the same time of curing in the sun?

@XecutiveOfficial

Жыл бұрын

Don't apply or let it cure in direct sunlight. While it is possible you would want to let the product sit on the car in a place where it is less prone to the elements. The purpose of this is so the product doesn't dry out prematurely and to avoid exposure to decontamination.

How much would you charge for this service?!

Can you do a ceramic coating on top of that?

@RonR227

Жыл бұрын

I’m referring to if you did it properly with 3 steps, rubbing compound, correct to polish, and then a polish on top of it. Then your 3rd step with uno protect, then ceramic coat

I do this, but instead of BeadMaker, I use GTechniq'sLliquid Crystal C2 V3. It also works with Jescar's Power Lock+ and Ultra Lock+.

@mozart369

Жыл бұрын

I just ordered the C2V3.. so do you use it to wipe off the polish like was shown here, or apply after as a topper?

@ronayotte3571

Жыл бұрын

@@mozart369 you can do either/or.

Can you ceramic coat after a one step? Even if it has a sealant?

@theragcompany

18 күн бұрын

Technically yes, but you MUST use a panel prep product before the application. Ideally, you would want to one-step with a product that contains no protection.

Can this technique with bead maker be used with any one step polish or is it more designated for the uno protect product?

@chrisrefaei

Жыл бұрын

Any one step for sure

@kylechow6072

Жыл бұрын

No, it cannot be used with any one step polish, If it is a All-in-one, then yes. Remember there is a very big difference between those two terminologies.

Can I use my Uno Protect on my Ppf on the front of my model 3?

@whiteywho7151

Жыл бұрын

Yes; Levi explained in a rupes uno video with Jason rose about using it on his wrapped suburban

Is the Uno protect supposed to be pink in color? I'm watching all these videos and the polishing cream looks White but my Uno protect the polishing cream is bright pink

@scottmattern482

Жыл бұрын

Unless they recently changed the formula, that might be something to be concerned about. My uno protect is tinted lightly orange/pink. Have you used it, does it seem to work?

@obsessedmobiledetailing

Жыл бұрын

My uno protect is pink also just got it yesterday. And the bottle I purchased like 4 months ago was pink too

At the risk of sounding like a noob (because I am) how come none of the areas were taped off?

@NipponStiqqyPaint

Жыл бұрын

Yolo

11:30 Some companies make a little inch or so long plastic cylinder shaped device to stick into the backing plate which guides the pad to backing plate and centers it perfectly. Maybe the rag company could find someone to make one for you and sell them on the site. If the Rag Company does get one and sells them, can I have a penny for each you the Rag Company sells for the idea? LOL I will even take it in store credit.

I think Beadmaker can beplaced with a more durable sealant or spray wax. Griots 3 in 1 Ceramic, TW Hybrid Solutions Ceramic, Adams Graphene Spray, Meguiars Ceramic....I understand Beadmaker is your favorite and you don't sell the others but 1 month of protection isn't enough for my vehicle or my customers.

@MasterOfShine

Жыл бұрын

Totally understand Jon but if you use Beadmaker every time you wash your protection is technically infinite. Also after years of using Beadmaker, I’ll tell you it lasts longer than a month. It’s all in how it’s washed and what type of weather you deal with. Here in Idaho, beadmaker does really well!

@GDavis49

Жыл бұрын

@@MasterOfShine Amen 🙏

What towels were used?

@GDavis49

Жыл бұрын

the FTW

But beadd maker only ast wers why not pt a carmaic coat

can you use if ceramic coated already?

@XecutiveOfficial

Жыл бұрын

Rupes Uno Protect is a polymer sealant that best adheres to bare paint. That's the reason for the 20 minute sit time + 4hours without getting it wet so the polymers can crosslink with the paint. If you apply over a ceramic coating the bond won't be as strong basically rendering it a waste of product. To get the most out of the product, including that amazing shine, I would recommend either removing the ceramic coating or just waiting until it's time for a new protective coating.

But I protect us only good for three months uno protectadva e protects for year you chose. Both Re siclise

You said "delicious" and I was ready for a meal, however I licked the ENTIRE HOOD and at NO point did it start tasting good! 0/10, very disappointed with Anthony!!

1st

You should have picked a harder car to work on tesla paints are easy to buff there clear coat is super soft I worked for tesla as a detailer for few years not impressed

This is awful. My 50 step process with 12 buckets and 6 polishers does a much better job

@theragcompany

Жыл бұрын

Whelp, have fun with that. 👋