Here Is An IMPRESSIVE All-In-One And Finishing Glaze! Koch Chemie At Apex Detail!!
Автокөліктер мен көлік құралдары
In this video I share my experiences with Koch Chemie P3 01 and P6 01. One is an incredible All In One polish and the other is a finishing glaze.
Micro Cut & Finish is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding marks to P3000 grain size on all paint systems (including scratch-resistant) with simultaneous long-term sealing with high degree of gloss and smoothness. Through the use of highly specialised, extremely homogenous abrasive bodies, a brilliant permanent high gloss finish is created under extreme light conditions even on dark and similarly sensitive shades. Holograms and fine scratches are eliminated mechanically and not, which is often the case, covered over. Micro Cut & Finish is economical, easy to polish and to remove. Contains carnauba wax and non-fugitive silicones. Cut: 3,2 Gloss: 9,5
P3 01 Cut & Finish.....apexsurfaceprotection.store/
P6 01 Micro Cut and Finish is an innovative machine polish for quickly producing high-gloss surfaces and for effectively removing scratches and grindings from a grit size of P2000 and above with a simultaneous sealing effect. Cut: 6,0 Gloss: 8,0
P6 01 Micro Cut & Finish.....apexsurfaceprotection.store/
Data sheet and resource page for products by Henry Freeman! docs.google.com/document/u/0/...
Follow Apex Detail on INSTAGRAM for more exciting projects!!
/ apexautodetail
apexautosurfaceprotection.com
Apex Detail Support Group (FaceBook) / 946245059134747
#kochchemie #apexautodetail #autodetailing
Пікірлер: 115
What is your favorite All-In-One?
@scottglenn6444
2 жыл бұрын
I absolutely love Rupes Uno Protect, the initial slickness & gloss are impressive.
@danlc95
2 жыл бұрын
@@scottglenn6444 - I'm trying that one next!
@danlc95
2 жыл бұрын
3D Speed.
@Vernitis
2 жыл бұрын
3D Speed
@J-dizzle2021
2 жыл бұрын
Turtle wax from Advanced Auto. Lol 🤣
Just started using this brand a week ago, and holy crap their products are good!!!
I’m so glad you picked these up 🙏 Koch Chemie is taking over the industry
Great video Brian your always putting out loads of information on different products . It really helps in deciding what to use.Thanks 😎😎
Love koche chemie products, nothing but pleasant experience with everything I've tried so far
Love the products this company puts out. As a newbie it's nice to have the pads and polish color-coded, and they don't have fifty polishes that all do basically the same thing. Any company that can keep it simple is a company I'd like to work with.
Both look really great! Thanks for sharing. It's nice to have systems like this.
I really like M302. Works great. Have a happy Thanksgiving Brian. Thankful for all your videos.
I absolutely love the M302 and F601!! These will be on the shelf next to them very shortly 👌
Just used M301on my Panamera with Koch purple pad following recommendation from Brian. Results were fantastic.
Been using Koch Chemie for a while now and their product line is seriously impressive! Highly recommend to give the brand a chance!
Excellent video ✊These products are the go to for me. I will definitely continue using this. I used to get to use 3D1.Thanks Brian ✊
I picked up the H9 per your recommendation… ordering the rest. You are spot on.👍🏻
We love them in Europe. Koch has many more chemical products in the lineup. I hope soon you get the full line in the US.
They make great stuff. I have the 9,6 3. Absolutely love them. Burning through everything else so it’s just the 3-4 products.
*My favourite channel* 🔥🥇🏆 Finally Brian. I’ve been waiting for that Koch Chemie P6.01 review. Thanks for your time and effort. Thumbs up! # *Q: Would you please compare the Koch Chemie P6.01 vs 3D ONE?*
Very nice. Thanks for showing us this. I have a couple of tasks that need done. Might re-think a purchase.
Awesome video! That's a powerhouse product line! Thanks for sharing this! You're the man! Awesome results! I have m302 and F6.... haven't used them yet. 3D speed and drive auto appearance are on the shelf... never tried them.
Excellent product line to carry. Congratulations and may you sell all you can order.
Great video as always!
I think you made a great decision to choose Koch Chemie products. I’ve been super impressed with their Heavy Cut and coordinating red pad. Going to try the finishing polish next to see how it stacks up to Sonax Perfect Finish.
@paulreichelt1259
2 жыл бұрын
Cynthia was that the 9H heavy cut . Just wanted to ask if you have used Menzerna heavy cut 400 (?) and if you have did you feel they were very similar?
Love P6 01 My new go to for a one step!!👍
@user-hn6tk7kr2p
Жыл бұрын
Can I apply fusso coat after that ?
You have thought me almost everything I know Watched you for a year straight before I started my business , the rest is history Much love from larrysautodetailing in LA 🙌🏾🙌🏾🙌🏾🙌🏾
I think you should to let it sit the product for 20 min before to remove it. I saw this advised talking from koch chemie people.
Mckee 37 ceramic 360 and anything from a yellow foam rupes pad to a yellow rupes wool pad, depending on how the paint or clear responds and the goal in mind.
Another awesome video and tutorial/product review good friend. B well good friend
Hi Brian, does the one cut have fillers in it, which are gone after some time ? Or is it just a polish with a sealant combined ?
Thanks brian
Nice!! Love the P6 and M3! Pretty impressive stuff. How do you like the cordless shinemate?
@apexdetail85
2 жыл бұрын
It is working GREAT! Happy Thanksgiving!
Good stuff!
Wow, looks like I need to invest in a polisher and spend some time getting to know the Koch Chemie system. That was impressive, Brian! 👍
@no_lft_shft
2 жыл бұрын
Oh the ol rabbit hole lol. I found myself in the same situation with rupes and carpro line up lol. Now I'm broke
I'm a mobil detailer and I have been using Jescar Heavy Cut Compound and then finishing off with Koch Chemie M3.02. Should I be using Koch Chemie cutting compound instead? Can you do a video comparing the 2?
So with the P6 01 having a sealant, how can you tell how much of the end result is actual correction versus fill? Can you coat behind the P6 01?
Thank you for your informative videos. What polishers would you recommend for doing headlight restorations?
@apexdetail85
2 жыл бұрын
That would be subjective as to how oxidized they are. H9...or even F6
Doesn't really have a lot of cut but the Griots garage Boss finishing sealant is great for love marks
When I first started watching you a cross hatch pattern was always 2 passes each way, why the change. Is it not necessary? Thank you 😊
Hi Brian, how would you rank these vs. 3D One?
Hello! I would like to apologize to the master, but at times like this, I would prefer to see a faulty engine hood from which a fantastic end result is produced. Have a nice day.
i see you watch the right news ;)
Which one is better to use on gel coat?
Does it make sense to apply solid wax or P1.01 after P6.01?
Brian, which are your favourite polishing/finishing pads when comes to finishing (of course using the top notch products as 3D ACA520 and Sonax Perfect Finish)?
@weSteh
2 жыл бұрын
The media used depends on the paint. A favourite would be the correct combination would it not ?
@apexdetail85
2 жыл бұрын
Its subjective...but here are a few...the CarPro Gloss pads, Rupes Fine, Da Fine. Koch Chemie Micro Cur pads
Can you ceramic coat after buffing with p601 ?
What dual action polisher is that?
How you like that cordless buffer? Im debating between this one and the flex cordless one. Which one do you recommend.? The cost does not matter.
@apexdetail85
2 жыл бұрын
Review video coming soon...I love it....so far.
I love P3 01, but get dusting with F6 01, no matter how I use it.
can you use a coating on top of a product that leaves protection behind like turtle wax hybrid ceramic polish
@apexdetail85
2 жыл бұрын
No coatings...but other sealants and or wax.
Hello. Please tell me what is the difference between PPS and SIL. Which one is better paint prep for ceramic coating?
@user-hn6tk7kr2p
Жыл бұрын
For paint prep use Koch chemie PPS Geyon prep
Nice video. How would this stack up against Bilt Hamber Cleanser Polish?
@apexdetail85
2 жыл бұрын
This has protection so it goes a step further than Cleanser Polish.
What do think about Rupes ‘s wet sanding disk and papers?
@apexdetail85
2 жыл бұрын
They are very effective and durable.
Hi Brian, is it possible we will see a review on the shinemate cordless polisher.
@heily-3806
2 жыл бұрын
I hope it works good that would be so awesome not to fight a chord 🤣
@AmirAbdullah
2 жыл бұрын
@@heily-3806 I have them, a lot better than ppl think.
@apexdetail85
2 жыл бұрын
That is the next video.
I have a question the m3 02 can used with yellow pad for light cut?
@AmirAbdullah
2 жыл бұрын
Yes. Just use a little more product and slower arm speed. You’ll need to clean it a little more often as well.
Hi! Are u using the shinemate EB351? Can you tell me your experience with it? I hesitate to go cordless.... Because I don't think I'm going to have enough power
@AmirAbdullah
2 жыл бұрын
If you want heavy duty power the ShineMate 21mm cordless is the answer. Same output as the Griots new G21 without all the issues. Super powerful, search KZread for ShineMate Cordless. The CarCraft video is most in depth.
@apexdetail85
2 жыл бұрын
I can email you an explaination of each product.
Hello Brian, I'm in need of a AIO that I can buy by the gallon. I was using McKees 37 360 "Corrects, clean . seals" I just went to order more and its seems its discontinued. I see now 360 is a ceramic coating. Could you please recommend something ? I'm doing some friends cars and cars I sell. Some are very oxidized or have crappy paint, swirls, scratches etc. I am a DIY'er, but been doing cars for awhile on the side. I'd like something that can correct, clean, polish and leave a sealant Love the vids and your knowledge ! Thank you very much !
@apexdetail85
2 жыл бұрын
3D Speed.
@YOPHILLYYO
2 жыл бұрын
@@apexdetail85 I looked it up and its about $100 a gallon. I'm looking to be at $50 a gallon like the McKees was. Anything in that range ? Thanks !
When u use your gloss meter. What angle do u set it on. 20 deg. 45 deg or 60 deg
@apexdetail85
2 жыл бұрын
60 degrees. 80 for high gloss surfaces such as glass.
@tommartin1223
2 жыл бұрын
@@apexdetail85 thank you so much sir
can i hand wax the car after applying any of these? or it is unnecessary ?
Hey what supplier do you use for your Koch Chemie products?
@apexdetail85
2 жыл бұрын
I sell them...they are available on my store. link in description box.
Это лучшие пасты
I have an 8oz bundle of Koch for auction on EBay right now! I have the heavier cutting AIO with it though. Please take these things off my hands! 😂
@AmirAbdullah
2 жыл бұрын
Post a link
@apexdetail85
2 жыл бұрын
I will take all of it.
@danlc95
2 жыл бұрын
@@apexdetail85 - I'd send it, but I have people who bid on it already! Love ya, Brian. Thank you for these killer vids! Happy Thanksgiving!
Angelwax aio or koch chemi?
@apexdetail85
2 жыл бұрын
Angelwax has Sio2...so there will be cure time. Both are great.
Brian what polisher is that
@apexdetail85
2 жыл бұрын
Video review coming. Its the ShineMate EX620
@apexdetail85
2 жыл бұрын
Or EB351 cordless.
@arellano7103
2 жыл бұрын
@@apexdetail85 nice
i find their label very confusing with all different letters and numbers... plus one cut- micro cut- fine cut... P6F6@!@#$ is the finish a Glaze or a wax..i hate glaze.. lol! ill stick with 3D. too confusing !!!!!!
Your links to the featured products in the video conveniently go to your products! 😂😂😂
@apexdetail85
2 жыл бұрын
They are available on my store!!
@tundrawhisperer4821
2 жыл бұрын
@@apexdetail85 ouch!!! $60 a bottle. Just too rich for me. Thx Brian.
"use 3000 grit", proceeds to show 1500 grit disc...
3d speed
Overpriced and not as good as 3D one.
@apexdetail85
2 жыл бұрын
3D One is NOT an All-in -on. Its just a one step.
@MeliorIlle
2 жыл бұрын
@@apexdetail85 In that case, 3D speed is far superior lol
@marioskosmidhs9454
2 жыл бұрын
@@MeliorIlle sir have you used them both? In what cases, scenarios, clear coats you found on your testing that 3D speed is superior?
@MeliorIlle
2 жыл бұрын
@@marioskosmidhs9454 All of them.