This build uses all Furitek electronics and although their servo can do 6v, their TEGU24 Pro esc only supports 5v and 6.5v. And I confirmed with the company that the servo can not handle the 6.5v. There also isn’t a way to add an external BEC to this type of 2in1 esc. Someone suggested that I wire the BEC directly to the servos to get 6v but I didn’t want more wires. There’s also no ports for a glitch buster. So I figured I’d wire up a capacitor as I would a cap pack. The servos weren’t browning out or anything before this but I just wanted to make sure they had a decent power supply since there are 3 of them.