Today we replace the stock he351 on our 2007 Dodge Ram 2500 Cummins 5.9L with a brand used Fleece Cheetah 63/67 he351.
Жүктеу.....
Пікірлер: 58
@cdun69693 жыл бұрын
This channel is growing fast keep the uploads going
@witcher713 жыл бұрын
I did a 63/67 with the 341 cover on my dinosaur 12 valve. Love it!
@therenaissanceman53113 жыл бұрын
Awesome video man. Can't wait to see the dyno numbers
@utawmuddy59403 жыл бұрын
SO happy you started another channel, Love power driven, but Not enough videos! I love seeing ho often there is a new one, especially now the you are building up your 3ird gen. I am in the process of building up my 3ird gen and can really utilize the info your brining. Great job, and keep em coming. You have a vary faithful follower here!!!
@slowaf12v3 жыл бұрын
Great Install Video!! Sounds Amazing!!!
@torysukut96923 жыл бұрын
Great content. Will definitely be looking forward to the gains on the dyno.
@horsetorquesdiesel
3 жыл бұрын
Coming soon!
@BackTo4chan3 жыл бұрын
I’ll be here for them all!!!
@bdjm85953 жыл бұрын
Looking forward to the dyno run!!
@robertturnbull29033 жыл бұрын
I was ready for some full throttle rips. That's not your usual driving style. Awesome video.
@horsetorquesdiesel
3 жыл бұрын
Gotta give it a chance
@mikestrucks3 жыл бұрын
Awesome video again 👍🏻 i love the sound !!! My 67/67 makes the same noise 💨🤘🏻
@horsetorquesdiesel
3 жыл бұрын
Whistle pounds brother!
@cupwalker24.75 ай бұрын
Nice . That's a good turbo , I usually like to leave my 4 turbo mounting bolts just a little loose on the manifold it makes getting the down pipe clamp on just a little easier and then tighten everything down . 👍
@jeepsnthings5653 жыл бұрын
Sweet! It sounds amazing!
@ryanbrown9183 жыл бұрын
Yeaaa buddy. Love this 3rd gen project series
@horsetorquesdiesel
3 жыл бұрын
Thank you!
@mvcg-cl4cr3 жыл бұрын
Which way does the turbine to manifold gasket go in? Hump towards the manifold or turbine housing?
@3rdGenCummins3 жыл бұрын
Awesome video
@jamesmarlar6963 жыл бұрын
Awesome as usual my next upgrade on my 2nd gen will be a turbo and sounded sweet
@horsetorquesdiesel
3 жыл бұрын
Good choice!
@garvensgarage89033 жыл бұрын
Can you please do a drive pressure run and explain how it would perform on the dyno if you had much smaller injectors. Say like roughly 20 percent overs
@RamTahoe3 жыл бұрын
I had a 63/67 on my 06 for a while....... recently bumped up to a 63/73, what a difference! Doing things different order but similar to my truck, I have 150% Exergys tho
@horsetorquesdiesel
3 жыл бұрын
They are fun on tow trucks and daily drivers!
@73cjproject3 жыл бұрын
Great video! Definitely a noticeable change in how she sounds. Looking forward to seeing the dyno changes. Do you plan to use this later as a bottom charger for compounds? Or do you not see it living that long?
@horsetorquesdiesel
3 жыл бұрын
No this will only be a single turbo!
@73cjproject
3 жыл бұрын
@@horsetorquesdiesel big single for the 1k hp! Should make for a fun street truck. Easier and more cost effective than compounds for the hp goal?
@samgingerich97643 жыл бұрын
I've got the same cheetah charger.with a PDD 3rd gen compound kit. Love the setup, Should try a PDD setup and see how good the results are!
@chrismangham1149
2 жыл бұрын
Which large turbo do you have? I just picked up the 63cheetah to pair with my S475
@jimmungai19383 жыл бұрын
Hey your hair is just fine if that works for you that’s good for me you guys don’t have a topside creeper you need to get one make life a lot easier this is six in a row jim hey keep up the good work guys
@riley429453 жыл бұрын
Can’t wait to see the s467.7 on here that will be the deciding factor for a s474 or the s467.7
@horsetorquesdiesel
3 жыл бұрын
They are fun!
@darth_taterz3 жыл бұрын
be easier to change the turbo if it was a 2nd gen...lmao coming over from PDD channel laughing my ass off in the first 10 sec keep it up bois
@horsetorquesdiesel
3 жыл бұрын
It would’ve been for sure lol
@larrypeachy23913 жыл бұрын
Did you do different cam ? I've heard these factory scams are terrible (I have an 07 5.9 as well) but wonder just how big of gains are to be had with good cam ....
@horsetorquesdiesel
3 жыл бұрын
No stock cam sir
@Nathangies
3 жыл бұрын
I have a he351 67/67mm colt cam stg 3 100hp sticks firepunk tuned. Spools like stock or better
@peterdecasas36553 жыл бұрын
🤘🤘
@Filzkiiz3 жыл бұрын
YesSiRr!!😎👊👍🤙🔥💯😉👌!! Making it puRRr!! Hehe!!😁😊😆!!
@TheProchargedmopar3 жыл бұрын
👍
@jackfarmer11372 жыл бұрын
What light is that you're using under the hood?
@horsetorquesdiesel
2 жыл бұрын
Snap on
@jeffbeaird7473 жыл бұрын
Are we gonna see a turbine launch again..? I hope not
@horsetorquesdiesel
3 жыл бұрын
Never know with me lol
@BrandonMartinez-bw8py2 жыл бұрын
From Colorado?? Larry h miller
@horsetorquesdiesel
2 жыл бұрын
Yep that’s where I bought it
@dcoppedge063 жыл бұрын
Mulmer? You mean millimeter?
@horsetorquesdiesel
3 жыл бұрын
Mulmer I meant what I said 😂
@hey_youtubeim_back21592 жыл бұрын
Is he saying molimeter?
@horsetorquesdiesel
2 жыл бұрын
Yes yes he is
@DanielPats12283 жыл бұрын
Why does the title say fleece cheetah when it’s a Taterbilt? 😂
@horsetorquesdiesel
3 жыл бұрын
Because Austin Tate confirmed it wasn’t his and Chase Fleece texted me confirming it was their turbo produced around 2017.
@DanielPats1228
3 жыл бұрын
@@horsetorquesdiesel nice. I had a tater built on my old 5.9. It ripped. Now I’m running diesel power source’s 66/74 turbonator s300 on my 17 6.7. Runs like a dream. Haven’t hardly touched 1,000°F since install
@uhmlmfao3 жыл бұрын
Probably better off it was a cheetah, taters aren’t called taterbombs for no reason 🤐
Пікірлер: 58
This channel is growing fast keep the uploads going
I did a 63/67 with the 341 cover on my dinosaur 12 valve. Love it!
Awesome video man. Can't wait to see the dyno numbers
SO happy you started another channel, Love power driven, but Not enough videos! I love seeing ho often there is a new one, especially now the you are building up your 3ird gen. I am in the process of building up my 3ird gen and can really utilize the info your brining. Great job, and keep em coming. You have a vary faithful follower here!!!
Great Install Video!! Sounds Amazing!!!
Great content. Will definitely be looking forward to the gains on the dyno.
@horsetorquesdiesel
3 жыл бұрын
Coming soon!
I’ll be here for them all!!!
Looking forward to the dyno run!!
I was ready for some full throttle rips. That's not your usual driving style. Awesome video.
@horsetorquesdiesel
3 жыл бұрын
Gotta give it a chance
Awesome video again 👍🏻 i love the sound !!! My 67/67 makes the same noise 💨🤘🏻
@horsetorquesdiesel
3 жыл бұрын
Whistle pounds brother!
Nice . That's a good turbo , I usually like to leave my 4 turbo mounting bolts just a little loose on the manifold it makes getting the down pipe clamp on just a little easier and then tighten everything down . 👍
Sweet! It sounds amazing!
Yeaaa buddy. Love this 3rd gen project series
@horsetorquesdiesel
3 жыл бұрын
Thank you!
Which way does the turbine to manifold gasket go in? Hump towards the manifold or turbine housing?
Awesome video
Awesome as usual my next upgrade on my 2nd gen will be a turbo and sounded sweet
@horsetorquesdiesel
3 жыл бұрын
Good choice!
Can you please do a drive pressure run and explain how it would perform on the dyno if you had much smaller injectors. Say like roughly 20 percent overs
I had a 63/67 on my 06 for a while....... recently bumped up to a 63/73, what a difference! Doing things different order but similar to my truck, I have 150% Exergys tho
@horsetorquesdiesel
3 жыл бұрын
They are fun on tow trucks and daily drivers!
Great video! Definitely a noticeable change in how she sounds. Looking forward to seeing the dyno changes. Do you plan to use this later as a bottom charger for compounds? Or do you not see it living that long?
@horsetorquesdiesel
3 жыл бұрын
No this will only be a single turbo!
@73cjproject
3 жыл бұрын
@@horsetorquesdiesel big single for the 1k hp! Should make for a fun street truck. Easier and more cost effective than compounds for the hp goal?
I've got the same cheetah charger.with a PDD 3rd gen compound kit. Love the setup, Should try a PDD setup and see how good the results are!
@chrismangham1149
2 жыл бұрын
Which large turbo do you have? I just picked up the 63cheetah to pair with my S475
Hey your hair is just fine if that works for you that’s good for me you guys don’t have a topside creeper you need to get one make life a lot easier this is six in a row jim hey keep up the good work guys
Can’t wait to see the s467.7 on here that will be the deciding factor for a s474 or the s467.7
@horsetorquesdiesel
3 жыл бұрын
They are fun!
be easier to change the turbo if it was a 2nd gen...lmao coming over from PDD channel laughing my ass off in the first 10 sec keep it up bois
@horsetorquesdiesel
3 жыл бұрын
It would’ve been for sure lol
Did you do different cam ? I've heard these factory scams are terrible (I have an 07 5.9 as well) but wonder just how big of gains are to be had with good cam ....
@horsetorquesdiesel
3 жыл бұрын
No stock cam sir
@Nathangies
3 жыл бұрын
I have a he351 67/67mm colt cam stg 3 100hp sticks firepunk tuned. Spools like stock or better
🤘🤘
YesSiRr!!😎👊👍🤙🔥💯😉👌!! Making it puRRr!! Hehe!!😁😊😆!!
👍
What light is that you're using under the hood?
@horsetorquesdiesel
2 жыл бұрын
Snap on
Are we gonna see a turbine launch again..? I hope not
@horsetorquesdiesel
3 жыл бұрын
Never know with me lol
From Colorado?? Larry h miller
@horsetorquesdiesel
2 жыл бұрын
Yep that’s where I bought it
Mulmer? You mean millimeter?
@horsetorquesdiesel
3 жыл бұрын
Mulmer I meant what I said 😂
Is he saying molimeter?
@horsetorquesdiesel
2 жыл бұрын
Yes yes he is
Why does the title say fleece cheetah when it’s a Taterbilt? 😂
@horsetorquesdiesel
3 жыл бұрын
Because Austin Tate confirmed it wasn’t his and Chase Fleece texted me confirming it was their turbo produced around 2017.
@DanielPats1228
3 жыл бұрын
@@horsetorquesdiesel nice. I had a tater built on my old 5.9. It ripped. Now I’m running diesel power source’s 66/74 turbonator s300 on my 17 6.7. Runs like a dream. Haven’t hardly touched 1,000°F since install
Probably better off it was a cheetah, taters aren’t called taterbombs for no reason 🤐
@horsetorquesdiesel
3 жыл бұрын
Bullet dodged 😂
Taiwan tornado
@horsetorquesdiesel
3 жыл бұрын
Nice!