Finally a British builder have watched loads of Asian & American & even a Cuban builder But now You! I’ve been in the process of moving & in doing so I’ve come across a load of speakers from my days as a Disc Jockey When we built all our speakers primarily to fit the van So I’m going to sit back & enjoy & learn again & I’ve done all the Sub & 👍

@DIY-AUDIO

2 жыл бұрын

Cheers John!!

They look beautiful!

@DIY-AUDIO

2 жыл бұрын

Thankyou, really happy with the finish and sound!!

Beautiful..piece of art

@DIY-AUDIO

2 жыл бұрын

Thankyou!

amazing build as usual

@DIY-AUDIO

2 жыл бұрын

Thankyou

Perfect 👍

@DIY-AUDIO

2 жыл бұрын

Thank you!!

Those cubes are amazing. I would buy a pair with pleasure

@DIY-AUDIO

Жыл бұрын

Thanks Nick, everything's available at a price. All my speakers are a one off!! 👍😁

@brushsuka

Жыл бұрын

@@DIY-AUDIO Yes totally understandable What's the building time for a pair of those cubes

@DIY-AUDIO

Жыл бұрын

Most of the time is waiting for paint and glue to dry between coats so, not including this probably 8-10hours but many more if you include the hanging around!!

@brushsuka

Жыл бұрын

@@DIY-AUDIO That makes sense. What's the best way to connect with you ?

@DIY-AUDIO

Жыл бұрын

@@brushsuka Hi, you can contact me from the about page on the channel. email or instagram!!

Te felicito. Está muy bonita esa caja acústica.

@DIY-AUDIO

Жыл бұрын

Gracias!

@DIY-AUDIO

Жыл бұрын

@@user-bs2ck7jv1x the UK

New subscriber

@DIY-AUDIO

6 ай бұрын

👍

I have two of these drivers so I’m going to do your build. Do they need baffle step correction? Lovely build and great vids thank you

@DIY-AUDIO

3 күн бұрын

Hi Martin, I didn't but guessing you could add a simple baffle step, a few have said it would be wise to do so. Good luck with your build!

They look great. But how do they sound?

@DIY-AUDIO

Жыл бұрын

There's a test on the channel. kzread.info/dash/bejne/Z4Vpl6SAXdfMYZM.html

Are you using carpet underlay? Hadn't thought of that

@DIY-AUDIO

2 жыл бұрын

😂 Yep, may not be perfect but seems to do the job ok and local carpet shop just gave me some offcuts for free!!

Watched a few videos now and you have some really nice builds here but please give a overview of what the design goals are (who and what the speaker is for) and how you came up with each design and some sort of assessment on if you achieved those goals. What is the intended use? Is it considered full range? Whats the F3? Are you using a notch or BSC filter? In other words why am I watching this aside from the build montage and seeing the finished (admittedly sexy) result?

@DIY-AUDIO

2 жыл бұрын

Thanks for the comments Phillip. It's certainly something I will possibly consider for the next one. My pleasure at the moment is actually just building a speaker that I like to look at in my house. (hence nothing massive as I don't have big rooms). To my 50 year ears they all sound good but I understand that people may want to know know a little more technical information. My main motivation has been to just to inspire different looking builds that anyone can have a go at and, to have a good finish that your wife is happy to have in the home but, I do understand where you are coming from. Keep an eye out!

@PhillioDoede

2 жыл бұрын

@@DIY-AUDIO I think everyone in this hobby approaches builds differently. Personally I'm looking for something functional (sounds good) as well as something that looks good the space it will reside, so aesthetics count too. I'm definitely ok with making compromises either way but not knowing anything about how it will perform makes me loose interest pretty quick.

Brother, how did you find the parameters of that aiyima 4 inch speaker? I want to build a transmission line, but I can't find its settings.

@DIY-AUDIO

2 ай бұрын

Hi bud, the parameters I measured are on this video (fairly near the start - you will need to pause to write them down) kzread.info/dash/bejne/Z4Vpl6SAXdfMYZM.htmlsi=aIOCtA3DsgVa7vp6

How are the aiyama drivers compared to tang band. Anyone tried ?

@DIY-AUDIO

2 жыл бұрын

Send me a pair and I'll let you know 😂😂

How do they sound, never mind the looks?

@DIY-AUDIO

2 жыл бұрын

kzread.info/dash/bejne/Z4Vpl6SAXdfMYZM.html

Great build! Can you give me the design of the speaker box?

@DIY-AUDIO

2 жыл бұрын

Measurements are on the video and parts used in description below. 18mm mdf.

@haidang92it

2 жыл бұрын

I want to increase size box to 25cm?

@DIY-AUDIO

2 жыл бұрын

Reckon you should be fine with that!!

@haidang92it

2 жыл бұрын

I will try it! Thank you very much!

did it work?

@DIY-AUDIO

8 ай бұрын

They are never going to shake the house down but enjoyable listen when paired with thr matching sub i built on the channel

very nice for 100$. but what about the cost for all the tools?????

@DIY-AUDIO

Жыл бұрын

Good point if you start from scratch but at over 50years old, I've been collecting tools for years!!

What is the port size and length?

@DIY-AUDIO

9 ай бұрын

Can't remember off top of my head but thr ports used are listed along with all the other parts in the description

The cubic shape is a bad idea for a speaker enclosure in general. The cubic-shaped speaker will have a lot of peaks on its frequency response diagram because of the addition of internal standing waves.

@DIY-AUDIO

Жыл бұрын

If you want to build the best acoustically sounding speaker you would likely be wanting to build a huge rectangular cabinet however when space / appearance / design is important then long the 'perfect' sound slightly will be worth it especially when the human hears don't record or register the complete frequency range?

@YouBrickChannel

Жыл бұрын

@@DIY-AUDIO, of course, it is obvious that appearance was the most important thing for this project, but your subscribers should know the price. For example, a cubic enclosure with internal dimensions 200x200x200mm most likely will have perfectly audible by human ear resonant peaks at 858Hz, 1720Hz, 2570Hz, 3430Hz, 4290Hz, 5140Hz, 6000Hz, 6860Hz, 7740Hz. But for a 'golden ratio' 324x124x200mm enclosure of the same volume, the internal standing waves will form only 1 smaller resonant peak around 4250Hz and for a 226x177x200mm enclosure which is almost a cube visually, there will be none of them. As to the huge rectangular cabinet, a huge volume is not required for Vas=3.34, Fs=84.22, and Qts=0.71. Something around 20L should be enough and will provide a more flat frequency response and the cutoff frequency around 40Hz compared to 60Hz of the present 8L volume.

Do you have an online shop ? I would love a pair of these.

@scrunts666

10 ай бұрын

I would not want those gold bases though, just rubber feet.

@DIY-AUDIO

10 ай бұрын

No, but, I hope to have one by the end of the year but, all will be one off builds. These as you see from the build can have the bases taken off and you could always add rubber feet. Keep an eye out on the channel as all my builds will be for sale!!

Box size 23x23x23 ?

@DIY-AUDIO

Жыл бұрын

Yes!

День добрый! А нельзя ли чертёж с размерами корпусов?

@DIY-AUDIO

Жыл бұрын

Hi, sorry can't translate to reply.

@Alex-Paganini

Жыл бұрын

@@DIY-AUDIO How rege box?

@DIY-AUDIO

Жыл бұрын

@@Alex-Paganini not sure what rege is. Size?

@DIY-AUDIO

Жыл бұрын

​@@Alex-Paganini 230mm x 230mm x 230mm. Size is at start of the video

@Alex-Paganini

Жыл бұрын

@@DIY-AUDIO спасибо

again..no sound test🥱🥱🥱🥱

@DIY-AUDIO

2 жыл бұрын

Sorry about that!! Will be starting adding them at the end of future builds and I will try and do a video of existing builds being sound tested!

Why dont you say something.

@DIY-AUDIO

Жыл бұрын

It's pretty self explanatory!