Cross Cut Sled For My Dewalt DWE 7485
Спорт
I've had my Dewalt table saw for a year now , I've been told a cross cut sled is the best thing you can add on to the table saw , so I decided to make one. It's only a small sled , but perfect for my little projects.
Let me know what you think bellow in the comments section (good or bad)...and I will get back to you , thanks
Пікірлер: 56
Great job I love seeing you tubers that use tools the majority of us have and can afford.
@wallytrinc9885
3 ай бұрын
I hear you Brother 👍 , thanks for watching 🙏 .
I had absolutely no clue about what you were constructing until you completed it, and I must say, it's incredibly impressive! Well done, sir!
@wallytrinc9885
4 ай бұрын
Thanks for the compliment young man ! Yeah sometimes I have no clue as well & I tend to ''Wing it'' it takes a lot of brain power & creativity !.....it's hard work to wing it well 😁😁
Nice piece of work. Simpler than a lot of other sleds I have seen. Great work!
@wallytrinc9885
2 ай бұрын
Thanks Mate ! glad you like it - cheers ! ,,, Wally
I just made one for my saw. Love this sled, game changer for me in my shop. Thanks
@wallytrinc9885
Ай бұрын
Yup ! the sled has replaced my drop saw , Cheers mate...
Nice job, sir. That was a good watch.
@wallytrinc9885
Жыл бұрын
Thanks Keith , I'm glad you enjoyed the video, cheers !
I enjoyed your video. Thanks. I'm about to get started on one myself. Liked yours since I have almost the same saw.
@wallytrinc9885
3 ай бұрын
Thanks very much , I'm glad you like it ,,,, cheers !!
well done, my next sled
Nice job! Congrats!
@wallytrinc9885
8 ай бұрын
Thank you , no need to use my drop saw anymore .
Complimenti, non c'era altro modo, ho già lasciato un mi piace Non sono una professionista e ho intenzione di realizzare i miei mobili, cercavo consigli e grazie a Dio mi è arrivato questo video! Immagine perfetta e professionalità differenziata!!! Diverso da qualsiasi cosa abbia mai trovato qui sulla piattaforma! Grazie per la lezione! Successo !
@wallytrinc9885
15 күн бұрын
Grazie mille, sono felice che ti piaccia il mio video tutorial. Il mio prossimo progetto sarà una maschera rastremata da montare accanto alla sega Dewalt, saluti a tutti i miei cugini friulani !
Great video, thank you
@wallytrinc9885
6 ай бұрын
Thanks for the Compliment ! and thanks for watching 👍
Perfect video....Thanks !
@wallytrinc9885
3 ай бұрын
Glad you liked it Mark ..... Cheers Mate !
Looks the goods there Mr Wal
@wallytrinc9885
Жыл бұрын
Thanks mate 🙏
Look good well done
@wallytrinc9885
3 ай бұрын
Thanks Bill , glad you like it 👍
Nice Job Sir!!
@wallytrinc9885
3 ай бұрын
Thanks ! I'm glad you like it , "cheers"
XLNT video! I fairly new to woodworking and bookmarked this for the future when I am ready to build a sled. I'm in the USA and can easily convert to Imperial but maybe I'll just use metric, my rulers have both. Thanks again my friend
@wallytrinc9885
2 ай бұрын
I'm glad you enjoyed my sled build ! I'm sure you''ll build an excellent sled ,,,,, let me know how you go ,,, cheers Wally !
For your glueups try using a silicon kitchen spatula. It is a versatile spreader and nothing sticks to it so cleanups take moments.
@wallytrinc9885
20 күн бұрын
Thanks for the Tip ! I'll keep that in mind next glue up ! '' cheers ''
Since you're screwing the runners on anyway - use double-sided tape instead of glue. Much quicker and gives the possibility of changing the runners if needed...
@wallytrinc9885
Ай бұрын
Great suggestion !
Really good show, very consise, thanks so much.
@wallytrinc9885
5 ай бұрын
Thanks so much ! I'm really glad you liked it .....
Great video. I'll definitely be incorporating some of these ideas into my sled so thank you. How does the sled deal with supporting longer pieces? Say I had to put a dado slot into the end of a piece that was maybe a metre long. Would the sled support that?
@wallytrinc9885
7 ай бұрын
Hi David , you make two interesting points ! you'll notice the sled is off/centre , allowing more material to rest on the r/h/side, 700mm length is do-able , I've not attempted a metre long length as of yet , I would imagine it would need (2) clamps to secure it along the front fence . In regards to the dado (blade) honestly they're a grey area here in Aus , because the guard & riving knife have to be removed,,,, the fun Police have deliberately fitted short arbors to prevent their use , deeming the dodo blade unsafe. I believe this to be the case both in the UK (EU) table saws , obviously not the case in the USA ?
@davidhaydon4720
7 ай бұрын
Thanks for replying. I'm from the UK and yes it's the same here. I wouldn't want to use the table saw without a riving knife, that's just asking for trouble. The dado example was just the first thing that came into my head. 700mm is still a decent size capacity.
@wallytrinc9885
7 ай бұрын
@@davidhaydon4720 Thanks David Cheers mate 👍
Quick question. Why did you use wood instead of UHMW or a similar polymer for the runners? Do you have plans for sale?
@wallytrinc9885
8 ай бұрын
Hi , I used material that I had at my disposal , bee's wax works wonders underneath,,,,, sorry not for sale my friend .
You seem to get a very clean cut. I was wondering what blade you are using?
@wallytrinc9885
4 ай бұрын
Supplied Dewalt 210mm (8 1/4'' ) diameter blade with 24 teeth , great on the sled ,,,,not so great on heavy rip cuts , require upgrade to 40 or 60 teeth blade for clean cuts...
Harbor freight sells a inexpedience-if a foot pedal to shut off power tools safely
why not use 2x4 instead of 3 layers of plywood?
These heaps of clamps was humiliation (Kkkkkk)
@wallytrinc9885
5 ай бұрын
yess ,,,, one cannot have too many clamps!!! hehehe
@mrboics
5 ай бұрын
Clamps and screws. Thing will survive a nuke!
Why is the back fence so thick?
@wallytrinc9885
5 күн бұрын
Personal preference .
nice sled but u kinda went over board with the screws(in my opinion)..lol
@wallytrinc9885
8 ай бұрын
Thanks Buddy ,,,, I appreciate your feedback, cheers 🍻
why three layers of ply for the rear fence? That seems to be way overkill. One ply should have been sufficient for rear fence
@jamesmeader6539
20 күн бұрын
Probably to allow for two rows of screws. Makes sense.
great video -thank you
@wallytrinc9885
4 ай бұрын
You're welcome ,,,, thanks for watching ...