Wow. Ive been adjusting these blades precisely for about 23 years and always wondered what i would do if my eyes started going bad. Magnifying glass!!!!!!!! Thanx.

I had been trying to align my blades for about a week and finally got it without them nicking me thanks to your video. Also, I found that a quality small hand mirror is a great flat surface to use for aligning the blades too. Thanks for posting this.

damn your genius. as simple as this is ... i never even thought to adjust my trimmers (styliners 2) this way you've explained which would have probably made my day so much easier. so thanks for this video & thumbs up.

Thanks Bro, I was about to go buy a new one and then i figure I would try and fix it. Works perfectly!

Man, this was helpful as hell... A lil off on the verbiage, but we all get high and forget shit... My clippers just started biting, I was about to spend another 60 on them things... Appreciate it

I just bought a new pair because my old ones had a broken tooth from dropping it. Now I have two since I was able to fix my old one thanks!!!

Glad I could be of some help thank you for watching.

Very in depth assessment. I learned a lot man thanks.

This video really help me out alot. I jest got them same clipper's and thay was cutting like shit! And i found this video and done same adjustments i seen this guy doing and now im bless! This video will help you if you have them clipper's.

"Did I just cuss? My bad." Haha, the tensioner portion worked! Thank you:)

bro just bought some new ones and they were cutting so so ,put to used your info , cuts sharp like a charm. thanks.

Great video. Truly appreciate the tutorial.

thanks for the advice, it was very helpful.

video helped alot i was having some problems with my andis t outliner but this helped alot thanks fam !

Good video helped me with my issues.. Thx.

Appreciate the help.. saved me 60 Bucks

@DelaceLeCoiffeur

9 жыл бұрын

tr3star72 Glad You found the video useful.

This video got my clippers cutting tight

good shyt bro, the only video that explained a lot

mi afi say blessings fi the tips straight fram jamaica....u helped bro...

@DelaceLeCoiffeur

9 жыл бұрын

Glad I could help another one. Cheers!

Thanks for the advice

Just follow the the step if u do them all the step correctly u will find the problem @Ritesh Patel this the best video

Really helped, thanks

Thanks for the insight

Dope song bruh sick vid

good tips. good lookin homie

take the blade set off, open it up and take a look at the T-guide. Clean for blades, oil and reassemble the blades and reinstall on the machine and try it out! Make sure it well oiled.

Great video word u were looking for is actuate

That's what's up bro. You helped me out

Good stuff bro haha never thought of using a magnifying glass good idea

great video. If the fiber t guide is not centered right will it cause problems? if so how can you make sure its postion is correct.

I think its safe to say, from what I've experienced, the Outliners and Styliners differences are in their sizes. Styliners are larger but internally are quite similar. Thanks for watching.

Great video by the way...however, what can i do for a crisp line...after adjusting and no improvement...still seem pretty dull

Thanks, As you can see I try and thats what counts!

GOOD VIDEO I DID NOT NO ABOUT THE SCREWS IN THE IN SIDE

Thanks for the vid. I hope you could help me - I have an Andis CC-1 clipper and for the life of me I can't figure out how to take it apart... There's one screw at the back but I can't open it. Hope you could help

@dtrustsone I'll post a video on the way I "SHAPEN" my blades, in general can never guarantee the flatness of both blade mating surfaces. I'd suggest replacing them for best results. The metal device you're referring to is called a V-Block, I use the V-Block because I know that surfaces are true(flat or 180degrees). I'm a machinist be trade and machined that block myself.

I dont know if u use the wahl seniors but can u pos a vid on how to get the perfect zero gap

@SHEEDY5618 Which trimmer is better? In my opinion both my trimmers are Outliner II's 1 regular blade set, 1 with the T-outliner blade set. Both are good but the T-outliner makes short work when it comes to trimming due to the extra length of the blade. My choise is the T-outliner. What are your thoughts, which is better for you? Thanks for the question. One!

@djzaggay Ayo, this trimmers require regular maintenance, rule of thumb: Tighten the tension screw until it is flush makes contact with the tension spring and then give the tension screw another 1/4 to a 1/2 turn MAX. If you Tighten it all the way the blade set will surely over heat quickly.

You have to adjust the tension screw its too loose if its buzzing loud. Also make sure you spray some andis/oster air lube on it. WOrks perfect.

@RonHitson Glad I could help!

@tweety18konk Ayo, this trimmers require regular maintenance, rule of thumb: Tighten the tension screw until it is flush makes contact with the tension spring and then give the tension screw another 1/4 to a 1/2 turn MAX. If you Tighten it all the way the blade set will surely over heat quickly.

Thanks for the questions! So you purchased 2 Outliners and both are very loud? How many hours-of-usage do you have on them?

S&M playin' in the background. lol

When you adjust the tension screw you said screw it until you feel the resistance does the resistance mean when the screw starts to feel like its getting tight?

do you have to sharpen the blades in order to cut crisp or its enough if you follow the steps of your video how to adjust the t outliner

Ay bruh which trimmers do you think are better: the T Outliners, or the Outliner ii's. Thanks

Hello everyone here...pls help me solve this issue on t-outliner,ma blade wasn't cutting well so I went to sharpen it nice,but before I put it on i made sure I followed all the necessary steps which pple have provided on YT, and there comes the problem, where ever the blade touches on my face burns and leaves heavy black marks after 3 days ..any help pls?

Hey, I I have an Andis T-Outliner and the cutting blade is off centered as the first tooth from the left on the cutting blade is to the left of the first gap on the comb blade. Do you know how I can fix this?

@dtrustsone Might I ask how much you spent for benchstone from home depot? Is the benchstone still being used or is it collecting dust? How much do you think a blade set cost? I think we all(myself included) do things the hard way, I strongly suggest replacing the blades at least you know that had to pass Quality Control.

I learned a lot here. But, keep in mind some key points you blazed through. Like when you said you set the blade here because thats where it starts. I wished you could have held it a couple seconds longer so we could see exactly where you meant. When I pause the video-it wasn't as clear-so couldn't really tell. But I did learn. Also, what do you think of the Anivo Zero gap setters? I see you have your monster setter there.

I got a question, is that silver block thing to sharpin the blades? n' where would u get one of those tings

Hi friends I bought a product of andis outliner few days ago a new product but does a lot of noise how do I lower the noise?

Thanks for the reply.....I assume "Shapen" is a formal name for "Sharpening" (like sharpening a knife, etc)? I hear that the best result in getting trimmer to cut sharply is to sharpen them with a benchstone (assuming blades are adjust correctly) or get them sharpen by a diamond machine sharpener. I tried sharpening with a bench stone from home depot and i think i actually made it more dull. Any advice or video would be appreciated...thanks in advance!

Thanks buddy

How do you sharpen your blade? Do you use the metal device thats on the counter? where can i found it?

should i buy a new pair of liners if i lost the tension screw???

which one do you prefer, outliner II or the t-outliner

I just bought an outliner 2 and out of the box its very loud. Do you have any tips to resolve this?

great

@delace1111 ovrall what blade would you pick if you could just have one the t or the basic!?

So if my machine gets hot fast I need to adjust the inside screws

@tweety18konk sounds like its wasn't adjusted properly from the factory. Return it to the place you purchased it, they should be able to replace it. good luck.

I broke mine too adjusting the tension spring

I HOPE THIS HELP HAVE TROUBLE WITH T-LINERS NOT TAPING ANYMORE THERE PULLING

i got my andis out the box an turned it on an its really loud how do quiet it down?

@delace1111 why! im curious cause i dont know what what to buy!

@enjoi1396 the cutting blade is running on an angle? perhaps, the fiber t-guide needs adjusting because the cutting blade runs on the t-guide and if the guide is off-center then the cutting blade will be too. So start over and follow my instructions. If the problem still exist then write me bacc. good luck.

@delace1111 I was thinking the same thing, just wanted to make sure I wasn't missing out on the Outliner ii's though. Good lookin

My blades come un done and starts rattling what do i do?

How i fix my fiber t guide

@cr4zyftw Outliner II for line-ups and T-outliner for Artwork/designs

o yea my t liner wuz not alined rite and it waz pulling my clientz hair t linerz r good when adjusted rite

Can you explain what is wrong with it?

@papoose1223 I prefer the T-Outliner Blade set.

@delace1111 Definitely the converter. had the same issue with my set I brought with me to Rome, Italy from the states

@papoose1223 Welcome Famz, Happy Barberin"!

@aenriquez90 AYO! Thx for the positive feedbacc, Yeee, the magnifying glass does take most of the guess work out of lining up the blades. Nuff Respect go out to all the "BARBERS (amateurs or pros)" on youtube doin they thang!

@delace1111 About $12...not expensive at all and the thought is if it worked i would be able to recycle one blade for a long while (and would be more economical in the long run). Anyhow...i get your point!

The silver block thing is a V-Block and no it is not used to sharpen blades.

@3zib Yes.

first 23sec SPIT IT OUT DAMN!

Where can I fined a V/ block @ I mean what store please if somebody no thank u if y'all no this iz mr,Streightkuts

@abz4life100 Sorry to hear the bad luck but I wouldn't give up, Find a convertor, try it, please let me know how it works out! Good luck brav!

@3zib Checc the video out on that topic, I just posted it up

@3zib yes u can

I DID THT RIGHT BUT NOW IT SEEM LIKE I CANT FIND THE PRO WIT THE SOUND THT MY ANDIS KEEP MAKE LIKE SOMTHING LOOSE WAT CAN THT BE MAN TRYED TIGHTING LOOSEING ALL KINDS OF SHIT I DONT WANT TO HAVE TO BUY NEW ONE AND SHIT HIT ME BACK ..

Not bad...

@canibus19 Ya'DIGGG! lol

Post*

I broke it

@delace1111 THANK YOU SO MUCH YOU SAVED ME 150 BUCKS!!!!!

Get to the f👏💪👉 point !!!

why so angry?

Get to the f*%# point !!!