Create Double Bends In Blender | Advanced Use of Simple Deform Modifiers | Fast & Easy Method
In this tutorial, we have discussed how to create two bends at the same time in any object, using the Simple Deform Modifier in Blender. For this tutorial, you should already have a fair knowledge about the bend operation in Blender - otherwise check our first tutorial from the link given below. We have used two Simple Deform Modifiers together to get double bending. Please watch the video for the complete tutorial. If you have any question on this tutorial, please leave your comment below.
๐๐ฎ๐ญ๐จ๐ซ๐ข๐๐ฅ ๐จ๐ง ๐๐ข๐ฆ๐ฉ๐ฅ๐ ๐๐๐๐จ๐ซ๐ฆ ๐๐จ๐๐ข๐๐ข๐๐ซ ๐ โข How to Bend Objects In...
๐
๐จ๐ฅ๐ฅ๐จ๐ฐ ๐ฎ๐ฌ ๐จ๐ง ๐๐ง๐ฌ๐ญ๐๐ ๐ซ๐๐ฆ ๐ / 5minutesblender
๐๐ก๐๐ง๐ค๐ฌ ๐๐จ๐ซ ๐ฒ๐จ๐ฎ๐ซ ๐๐จ๐ง๐๐ญ๐ข๐จ๐ง๐ฌ ๐ donorbox.org/5-minutes-blender
==================================================
We have many more tutorials that can help you learn Blender like a professional. You can go through the following playlists for the relevant topics:
๐ ๐๐ฅ๐๐ง๐๐๐ซ ๐
๐จ๐ฎ๐ง๐๐๐ญ๐ข๐จ๐ง ๐๐จ๐ฎ๐ซ๐ฌ๐ ๐๐ฎ๐ญ๐จ๐ซ๐ข๐๐ฅ๐ฌ:
If you are absolutely new to Blender, take this foundation course.
โข Blender Foundation Course
๐ ๐๐ฅ๐ฅ ๐๐ ๐๐ฅ๐๐ฌ๐ฌ๐๐ฌ ๐๐จ๐ ๐๐ญ๐ก๐๐ซ ๐๐ง ๐๐ง๐ ๐๐จ๐ฎ๐ซ:
โข Blender Foundation Cou...
๐ ๐๐ฅ๐๐ง๐๐๐ซ ๐๐ข๐ฉ๐ฌ ๐๐ง๐ ๐๐ซ๐ข๐๐ค๐ฌ (๐๐ฎ๐ญ๐จ๐ซ๐ข๐๐ฅ๐ฌ):
โข Blender Tips & Tricks
๐ ๐๐๐ฌ๐ฒ ๐๐จ๐๐๐ฅ๐ฌ ๐
๐จ๐ซ ๐๐๐ ๐ข๐ง๐ง๐๐ซ๐ฌ (๐๐ฎ๐ญ๐จ๐ซ๐ข๐๐ฅ๐ฌ):
โข Easy Models For Beginners
๐ ๐๐๐ญ๐๐ซ๐ข๐๐ฅ๐ฌ ๐๐จ๐ฎ ๐๐๐๐ ๐๐ง ๐๐ฅ๐๐ง๐๐๐ซ (๐๐ฎ๐ญ๐จ๐ซ๐ข๐๐ฅ๐ฌ):
โข Materials You Need In ...
๐ ๐๐ฅ๐ฅ ๐๐๐ฑ๐ญ ๐๐๐๐๐๐ญ๐ฌ ๐๐ง ๐๐ฅ๐๐ง๐๐๐ซ (๐๐ฎ๐ญ๐จ๐ซ๐ข๐๐ฅ๐ฌ):
โข Text Effects In Blender
๐ ๐๐๐ฆ๐๐ซ๐ ๐๐จ๐ฏ๐๐ฆ๐๐ง๐ญ & ๐๐๐ญ๐ญ๐ข๐ง๐ ๐ฌ ๐๐ง ๐๐ฅ๐๐ง๐๐๐ซ:
โข Camera Movement & Sett...
๐ ๐๐ฌ๐๐๐ฎ๐ฅ ๐๐ข๐ ๐ก๐ญ๐ข๐ง๐ ๐๐๐ญ๐ฎ๐ฉ ๐๐ง ๐๐ฅ๐๐ง๐๐๐ซ (๐๐ฎ๐ญ๐จ๐ซ๐ข๐๐ฅ๐ฌ):
โข Useful Lighting Setup ...
๐ ๐๐ข๐ ๐ข๐ ๐๐จ๐๐ฒ ๐๐ก๐ฒ๐ฌ๐ข๐๐ฌ & ๐๐ข๐ ๐ข๐ ๐๐จ๐๐ฒ ๐๐จ๐ง๐ฌ๐ญ๐ซ๐๐ข๐ง๐ญ๐ฌ:
โข Rigid Body Physics in ...
๐ ๐
๐ข๐ซ๐ & ๐๐ฆ๐จ๐ค๐ ๐๐ข๐ฆ๐ฎ๐ฅ๐๐ญ๐ข๐จ๐ง ๐๐ง ๐๐ฅ๐๐ง๐๐๐ซ (๐๐ฎ๐ญ๐จ๐ซ๐ข๐๐ฅ๐ฌ):
โข Fire & Smoke Simulatio...
๐ ๐
๐ฅ๐ฎ๐ข๐ ๐๐ข๐ฆ๐ฎ๐ฅ๐๐ญ๐ข๐จ๐ง ๐๐ง ๐๐ฅ๐๐ง๐๐๐ซ (๐๐ฎ๐ญ๐จ๐ซ๐ข๐๐ฅ๐ฌ):
โข Fluid Simulation in Bl...
๐ ๐๐๐ฌ๐ญ๐๐ซ๐ข๐ง๐ ๐๐ฅ๐๐ง๐๐๐ซ (๐๐ฎ๐ญ๐จ๐ซ๐ข๐๐ฅ๐ฌ):
โข Mastering Blender
If you want to watch our own creations in Blender, you can also check out the following channel where we regularly upload videos on Animation, Space Exploration and AI.
๐๐ฎ๐ซ ๐จ๐ญ๐ก๐๐ซ ๐๐ก๐๐ง๐ง๐๐ฅ ๐ฅ๐ข๐ง๐ค: / @thealienworld
#Blender #Animation #Modeling
Timestamp
00:00 Intro
00:23 Create suitable vertex groups
01:37 Add an empty & the first modifier
04:05 Another modifier for the second bend
05:32 How to change the bend orientations
ะัะบััะปะตั: 42
Vertex groups was the key ! Thanks ๐
@5MinutesBlender
ะัะป ะฑาฑััะฝ
Glad it was helpful for you ๐
its really unique, i have seen so many tutorial videos but they taught for only one bend by using simple deform, great Jeet๐๐
@5MinutesBlender
2 ะถัะป ะฑาฑััะฝ
Thank you so much ๐
Great explanation ๐๐ผ๐๐ผ
Good one
Thank you for making this๐ญ๐ญ๐ญ
@5MinutesBlender
9 ะฐะน ะฑาฑััะฝ
Thank you too ๐ But why crying bro?
@lovelettar
9 ะฐะน ะฑาฑััะฝ
my tears of joy๐ฝ๐ฝ@@5MinutesBlender
The best
@5MinutesBlender
ะัะป ะฑาฑััะฝ
Thank you so much ๐
awesome
@5MinutesBlender
11 ะฐะน ะฑาฑััะฝ
Thank you so much ๐๐๐
How can i bend 3d headphone to straight ? I means how to bend with fix part that 3d headphone look real with straight shape
@5MinutesBlender
ะัะป ะฑาฑััะฝ
If I understood this question correctly, you have a headphone model with curved part. You want to bend it on the opposite side to make it straight. The bend process will be the same. Assume that it is already straight and bend it using a deform modifier but use a negative value in the bend angle. One drawback is, even if the object looks straight after this, it will still have deformations along its length, that is difficult to remove just with a modifier. You'll probably need to remodel it.
@pratikthanki4935
ะัะป ะฑาฑััะฝ
@@5MinutesBlender thanks for answering brother as you said using vertex group glitch happenes in 3d model and model was destroyed.๐
#love
@5MinutesBlender
2 ะถัะป ะฑาฑััะฝ
Thanks! ๐๐
Wait what makes this better than pivoting around the 3D cursor or using a curve modifier?
@5MinutesBlender
2 ะถัะป ะฑาฑััะฝ
When you pivot around 3D cursor, the entire object will rotate. But what we are doing here is bending of an object. So part of the object will go one way, the other part will go another way. This is different from pivoting an object. You can get similar results also with a curve modifier. But a curve modifier has its own challenges (which you can of course overcome tactfully). Same thing, in two different ways.
Thanks. Please do a tutorial on wire
@5MinutesBlender
2 ะถัะป ะฑาฑััะฝ
Sure! Would you please elaborate it little more, like what exactly on wire, or what you want to create with wire ๐ค
@peterpan5087
2 ะถัะป ะฑาฑััะฝ
@@5MinutesBlender I want to create a musical stage with cable wires from the mic ๐ค to the floor, then to the amplifiers. I wish KZread can allow embedding image. But I hope it's clear now. Thanks for all the effort.
@5MinutesBlender
2 ะถัะป ะฑาฑััะฝ
@@peterpan5087 Ok, I got you. We can do that by using a curve with suitable extrude method, or by using a curve modifier. We'll surely plan for an appropriate tutorial on this. Thanks for the suggestion ๐
right view not front
Sir please create a marquee blender tutorial for led 3D printing.
@5MinutesBlender
ะัะป ะฑาฑััะฝ
Thank you for the tutorial suggestion ๐
@cap_fearless8696
ะัะป ะฑาฑััะฝ
@@5MinutesBlender Thank you Sir. I have been search the KZread for the tutorial on this but i have not found anything. I hope you will bring the tutorial. โคโคโค
@5MinutesBlender
ะัะป ะฑาฑััะฝ
@@cap_fearless8696 No problem. It will help us if you can share any video where this is used or any GIF etc. so that we can get a better idea exactly what kind of marquee you're looking for.
@cap_fearless8696
ะัะป ะฑาฑััะฝ
@@5MinutesBlender The title of the video is How to create 3D printed LIGHT MARQUEE with Fusion 360 and LED strip by Duke Doks. The search query for such content is "carteles 3D" I request you make it on Blender as fusion 360 is not familiar. There is language barrier between so its hard to follow up with their tutorial. Thank you โคโคโค
@5MinutesBlender
ะัะป ะฑาฑััะฝ
@@cap_fearless8696 Ok thanks, I will check.
Vertigo pipe???
@5MinutesBlender
ะัะป ะฑาฑััะฝ
What is a Vertigo pipe bro, I never heard ๐ค
from where are you bro...........?
@5MinutesBlender
2 ะถัะป ะฑาฑััะฝ
I am from the same planet as yours bro! Let it be that way ๐ because geographical boundaries often create differences.
not working for me
@5MinutesBlender
ะัะป ะฑาฑััะฝ
Hey, it's a little tricky. If you can tell us where exactly you got stuck, we can try to help you out. Please give us a timestamp from this video where you are stuck and tell us what results you get.
Doesn't seem to be working for me ๐ข๐ข EDIT: I was doing it wrong, it works perfectly well ๐
@mrgalvathron
ะัะป ะฑาฑััะฝ
I think it's the subdivision part for me
@5MinutesBlender
ะัะป ะฑาฑััะฝ
@@mrgalvathron It may be tricky because the Simple Deform modifier is itself tricky and we are using two of them here. You need to place the empty correctly, and use correct values everywhere which again depends on your object placement and its dimensions. And yes, subdivisions are important as well. If you can't get it working at all, you can send your blend file to us. We will check and suggest you what should be done. Thanks!
@mrgalvathron
ะัะป ะฑาฑััะฝ
@@5MinutesBlender it really was the subdivisions for me ๐คฃ, thank you guys so much. I didn't have enough loop cuts so it was looking werids. It works now!! โ
@5MinutesBlender
ะัะป ะฑาฑััะฝ
@@mrgalvathron Oh, glad to know that it is now working! Cheers!!