Crane Walker | Mandalorian S2 - Episode 3
Тәжірибелік нұсқаулар және стиль
#Mandalorian #StarWars #Walker
Episode 3 of the Mandalorian was great! There were a number of scenes that would look fun depicted in diorama form, but I decided to go with what I’m gonna call the AT-CRANE T pulling the Razor Crest out of the water.
The Razor Crest model I used was created by Andreas Mueller / Fine_Engineer and can be found here: www.thingiverse.com/thing:459...
I received permission to feature this model.
Andreas can also be found on instagram here: pCF9OCyelK...
The At-At Walker parts were made by Aidenanese and can be found here: www.thingiverse.com/thing:102...
If you download any of these 3D files or have in the past, please consider leaving a tip.
Materials:
.040 Styrene amzn.to/3dfQRyB
.020 Styrene amzn.to/349KlFl
Amazing Resin Clear Cast amzn.to/3kTwZU3
Mod Podge amzn.to/2HOK17W
Anycubic UV Resin amzn.to/2Jcj8uT
Hot Glue amzn.to/31YqJnm
Super Glue amzn.to/3hj9Pp7
Masking Tape amzn.to/3hlux6Z
String
Supplies:
Anycubic Photon Mono amzn.to/34IQB8Q
Safety Glasses amzn.to/3aJ6a1A
X-Acto Z Series amzn.to/3lpHGPW
Utility Knife amzn.to/3gizOM8
Ruler amzn.to/2QghRTO
Nippers amzn.to/2CRDx5O
Wire Cutters amzn.to/34pvb0u
Tweezers amzn.to/3iVlUkW
Paint Brushes amzn.to/2FquzgJ
Paint:
Rust Olium Flat Black
Rust Olium Silver
Vallejo Gloss Black
Vallejo Flat White
Vallejo Sky Gray
Vallejo Luftwaffe Green
Citadel Nuln Oil
Citadel Reikland Fleshshade
Music:
Patience - Dyalla
Empire Seasons - Dan Henig
FynestLyk - Noir Et Blanc Vie
A Caring Friend - Bad Snacks
Disclaimer: Some of the actions seen in my videos could cause bodily harm. I am not responsible for anything you do while attempting to recreate what you see me do.
Amazon Affiliate links are used above.
Пікірлер: 240
AT-CL - All Terrain Crane Lift - I think it's fitting.
@Natalie-em7sk
3 жыл бұрын
Personally I think it should be at-ct, all terrain crane transport
@Natalie-em7sk
3 жыл бұрын
Not going to lie I like yours a lot
@R3LOADlikesgames
3 жыл бұрын
That’s good but we have the AT-ACT. That’s the All Terrain Armored Cargo Transport. (The Rouge One walker) I think it would be a little confusing. Though my suggestion would be the same “situation.” My idea was AT-HCT: All Terrain Heavy Crane Transport.
@darthkek1953
3 жыл бұрын
@@Natalie-em7sk but it's not a transport. The AT-AT has squads of troopers in. These don't. Hence not transport.
@ivorys-ivy
3 жыл бұрын
@@darthkek1953 The All Terrain Scout Transport (AT-ST) doesn't transport people either
I just can't help giggling every time you say "AT-Crane T". That is such a perfect name for it, and it brings me such joy, haha.
I think for the next one you should make a book nook of baby yoda fixing the wires in the razor crest (from episode 4)
@marks47
3 жыл бұрын
Agreed... Seeing him trying to talk the child through the repair while he's in the conduit... A puff of smoke (cotton)coming out of the opening, with a flickering/flashing light inside....
@thomashendricks9774
3 жыл бұрын
agreed but it should be from the opposite direction. So when you look into it, The Child™ should be near you and in the back you see the mask of The Mandalorian™
@jenniferpower4285
3 жыл бұрын
@@thomashendricks9774 That would be AWESOME
Obvious. Obi Crane Kenobi!
I don't know why but watching you work with styrene is satisfying af
Would you be able to add water falling off the razorcrest? I feel like it would add to the scene.
The Mod Podge blown around with an airbrush to make the waves in the water is genius!
Amazing built as always. Next time if you spray the mold with silicone spray it will help to remove it easily from the resin.
@angrysmerf
3 жыл бұрын
OR use the brown side of parcel tape, resin won't adhere to it! It's how I did a sunken Star Destroyer once
@emilflognoid1532
3 жыл бұрын
I don’t use packing tape, or silicone, If you want your model, To release from molds, Then try some Vaaasssaline! Vaaassaline.... Vaaassaline... Vaasss-A- Lee-eeen !
@angrysmerf
3 жыл бұрын
@Jorund Shadefur here’s an imgur link (I created two! Photos ripped from my Star Ship Modeller Facebook post which got 1k likes! lol. So quality probably isn’t the best) imgur.com/a/Q7vuO6q
@thechosenone5389
3 жыл бұрын
Sir Stefan Lord of Kitty Cats That is simply amazing
Spoiler: For the next episode i suggest the reactor. You could do in the middle where they Turn the reactor off and on the top where Mando Fights the stormtroopers.
@cod_cape5483
3 жыл бұрын
Agreed! I love 2 layered dioramas lol
Dude, you are right on the ball so close to the episode airings! I know it’s not as straightforward as it looks and you have to have a keen eye and artistic flair for this level of work. Thank you!
Amazing diorama!! The crane came out way better then I thought and the waves looked outstanding!! Love your vids, keep up the good work!! Can’t wait to see what you do for episode 4!!
What I love about this show is how they tinker with the old to make something new
Fantastic combo of 3d printed and scratchbuilt Styrene.
I love your videos!! They inspired me to makes some projects of my own and I have come to learn alot while also having fun, thank you for sharing your beautiful work!!
Whoever does not like his work and master pieces LEAVE AND NEVER RETURN (I love your art work I made my own man do costume a while ago )
that water gradient is so pleasing
Glad I wasn't the only one who loved at geeked out over the AT-CT. Need to do a dio like this myself! Great work.
You should consider building a "monster" crain. For when monster hunters bring them in tosell, a crain lifts the cragged monster into a waiting wagon or something.
Awww, you didn't hand knit a tiny fisherman's sweater and put it on a tiny Mon Calamari. Great diorama as always, can't wait for the next one!
My reaction to this scene was literally “Lego, you know what to do.”
Again with the quick turn around. I half expect you to have a model from each episode before they air at this point. Keep up the great work.
I think you can grease the styrene when pouring the resin with pam or something to make it come off easy.
Astonishing detail in such a small scale. You're very gifted my friend.
These dioramas of yours are always next level
At-At crane sounds nice too.
"I just paused it. And I looked at it." Lmao. You make it sound so simple.
As I know and saw how you master the water effects tricks, I wish you could have represented the water flushing down from the Razor Crest, bringing then more life and movement to this new excellent diorama. Amazing work again, even more impressive at that scale. Excellent.
@Boylei
3 жыл бұрын
Thank you for the feedback and suggestion! I thought about this afterward. I will likely add that later!
That is a AT-ST Walker very nice to see as they reuse it as a 🏗
EXCELLENT DIORAMA FROM THE MANDALORIAN, EPISODE THREE.
I had, for the entire length of the video, The Mandalorian theme tune playing in my head.
Definitively confirmed that I cannot delay on watching the Mando episodes, but now I have the extra activity: guess what the next diorama is going to be :D
Great Mandalorian diorama ! 🎩👌👏👏👏🥇🏆
Wow, this is fantastic! It's hands down my favorite from your Mandalorian series, which by the way, I'm loving that you are doing. The fact that you just sat down and literally scratch built the AT- Crane T blows my mind. You will forever be the styrene master Caleb. Outstanding job! And man the creme brulee torch on the resin was indeed satisfying...
absolutely incredible you knocked this one out of the park
Crazy skills, considering you designed most of this is even more impressive. Can you upload 7 days a week?
The landing pad is actually based off SpaceX's droneship landing pad, 'Of course I still love you' and it has the name written in star wars language on the side. Considering one of the astronauts took Baby Yoda to space in the most recent SpaceX launch I thought that was pretty fitting.
You are a true master of your craft brotha, incredible work
Love your dioramas there always so calming to watch and look absolutely amazing
Another awesome build! Very well done!
Very talented you are, some scraps!! Wow, thanks for sharing.
You're one of the few channels that I tune I for their next upload! You never cease to amaze us all!
Another brilliant Mando build!
Thats gorgeous, just found your channel and am binge watching! I think it should be the AT-HLV All Terrain Heavy Lift Vehicle
I look forward to these as much as the episodes themselves! Really awesome
Episode 3 was fantastic! I am glad you took the time to build the walker gantry crane, as it really stood out for me too while watching this episode. It was a completely organic addition to the sea port setting, and a very profoundly grounding object. Love the build mate!
This has to be the coolest crane ever created/imagined!
You’re so creative! I love watching you create these amazing dioramas!
Another amazing video. Your videos are quickly becoming the one I look forward to the most!
You can use isopropyl alcohol on the hot melt glue to easily remove it.
@Boylei
3 жыл бұрын
That’s a good tip! Thank you.
Amazing that you did that in just a week. Fantastic work sir!
I liked it so much I pressed the like button twice!
Very well done. Love the stuff you've herm doing from the mandalorian. It's all been so good.
Another fantastic build, man. If you’re struggling with the resin mold not wanting to release, you can get a spray can of mold release, or maybe some more controllable one to just wipe on the sides so it doesn’t come off the base. But keep up the great work man, I’m loving the content
Best diorama maker ever, I swear! Your inventions are amazing
Details, details, details! I'm lovin' your freestylin' bits.
Lovin this mandalorian series! Keep it up!
You are very talented, I can’t wait to see what other cool stuff you make!
This is super accurate to the AT-Crate T from the show
3D printing has changed model building from the Hollywood prop professional to the hobbiest. I gotta get on board with this - soon. Great dio. Your work is an inspiration.
Dude what a amazing job!!! I dig this so much 👍👍👍🙌🏽😎🤙🏽
Stunning work as usual.
AT Crane-T is a perfect name! Awesome build, long time follower first time to comment. Love your content, thank you for sharing your talent.
I love these little projects of yours Boylei Hobby Time. I'm amazed at how quickly you can get these videos out so soon after the show. A 3D printer helps a lot I guess. I especially like the ones with the LED filament. You should have 28 million subscribers.
This a amazing built as always, like always you are an artist. Incredible model OMG great work. WOW! factor
Oh man, you're doing some real neat things dude. Good stuff!
Awesome build it just looks awesome !!
Wow that is amazing, cant believe how good it looks
Beautiful! I’m just amazed how how you do all these.☃️
Love these videos, every model is top tier
Man, this is fantastic work.
Simply amazing!
Swagbucks and minecraft! great scott this is handsome!
nice job. I personally would've added dripping water effects to the Razorcrest with some pva or modpog on some saran wrap tinted blue, then left out to dry. peel, cut, then glue in place.
@Boylei
3 жыл бұрын
Thanks for your suggestion! I might add that.
Man you are super talented. Watching your videos make me want to get into this hobby.
Awesome job! Mind blown as always!
I’m amazed how you can just watch something and go, yup thats what I’m building. It’s like you just plucked it right out of the show.
You could try to make the razor crest damaged like it was before the end of the episode
Next build should be of the troop transport thing gunning down a TIE, or razor crest blasting through the TIE
After I saw that scene I was really hoping you would do that. And you did not disappoint. It’s an awesome diorama. I am constantly amazed, how fast you can design and create something so cool. And yes, I envy you for the 3D printer...
Thats crazy dioroma for walker crane lifting! That is amazing! :) i would i would have one of those but its amazing neat!
AT-CraneT is definitely the best name.
Great idea and well done video thanks I look forward to your next one
Awesome work man! Keep up the great videos!
awesome work and very well inspired
Great job! Could add a little bit of sea weed on razor crest itself, even though it's great nevertheless.
Please keep going with your Star Wars builds, I love them!.
Great work !
How can one person have so much talent!
bor i love this, im so hyped for each new build. ppplllleeeeaaassseee do one for each ep this season
Amazing work man
Love it ! Great work again !!
Amazing creation! 👌
My god you have a talent sir!
I've been getting your videos recommended and wow, you're very talented! I think I'll subscribe.
And again.... Amazing and wonderful!!! I am spechless
At the end of the build you say .."I got it cleaned up and called it good." Man I wish that I could make something that awesome and just call it good. Great work again
that looks great, well done.
I love how you designed some of the prints on your iPad! Can’t wait to see more like this! Also, I love the name AT-CRANE T 😂 It turned out great and I can’t wait for your next giveaway!
What software did you use on your iPad to make the machine panel ‘Greeblies’?
Keep these small scale ones coming! Looks close to 1/300, aka the best scale 👀