Cheers for making the video :) Hi from England.

Craftsman T110 crapped out after I ran completely empty ... this video helped Thank You

I was mad yesterday because I put that thing same way you did but I did it on a right way and I fixed it thank you very much

Your delivery was quite good appreciate the tip

Thanks! This it's exactly the problem I am facing on a used mower I just bought.

Thank you!! This video helped me repair the carburetor for our riding mower quickly and easily.

This happened to me.your video was a big help.

Tremendous video. Lessons learned.

Add a shut off valve from the gas tank. Turn the gas off when you put the mower away. (Edit: I just did the same thing you did with the little orifice piece. I guess I'll go fix that............ Thank you for the video.......

Good vid 👍

Only my doesn't have a screw to change the needle/ float,but it's a good training vid.thanks

Wait what was the second problem? I couldn’t really see it nor understand what you meant.

ha ha ha I did the same thing with the jet!🥴

Did the Gas Stop Leaking in to the oil and floor?? I lost a hole haft gallon of gas... it mixed in with the oil and motor and on to the floor!!

@Mudford

5 жыл бұрын

guruGharr43 Yes, it’s been fine since.

Since your oil tank got gas in it, did you have to put on a new oil filter when you drained the gassy oil and put in fresh oil?

@Mudford

3 жыл бұрын

Definitely a good idea to change the oil. No filter on this model.

It would help to show getting at the carburator

Most likely the carburetor solenoid

What is the plug on the bottom of the float bowl?

@Mudford

3 жыл бұрын

For most carbs it’s for access to the main jet.

@rudymartin168

3 жыл бұрын

Solenoid

Mines carburetor is good just not the float is to light weight and cuts off the gas while going up hill or I park on a hill the float shuts the gas off wont start until I aim the front of the mower down hill

Was hoping to see the removal of the carb. Better to show all the steps, especially dismantling the carb then putting in back in order. Too much is missing here.

Like a dumbass I took mine apart in the yard where it broke down and lost the needle somewhere in the yard I mowed the grass by hand pulling the grass out and could not find it so therefore no mower for me I suppose I'm going to have to pull all the grass out by hand thank you for the video it was not clear when you put the needle back in it was off camera therefore when I do find mine I'm going to try and pay attention to put it in correctly the first time if not I suppose I'll be taking apart yet again

None of my craftsman's say Lt1000

@steringp1434

2 жыл бұрын

Well, if none of your's say it, then probably no model LT100 has ever existed. SMH

@Mike-su8si

2 жыл бұрын

@@steringp1434 my newer one might say it

@steringp1434

2 жыл бұрын

@@Mike-su8si Good, I was worried that there was no such thing as a LT1000 after reading your comment.

@Mike-su8si

2 жыл бұрын

@@steringp1434 I thought so at first