How to Cornerbead any outside corner angle using Straight-flex.
Жүктеу.....
Пікірлер: 36
@Matt-Hirsch11 ай бұрын
Very helpful. I'm installing bead on everything in my basement bathroom install with one exception and will use Strait Flex for the one angle. This showed me how and confirmed that my existing vinyl bead I got today won't work. Thanks!
@KyleHerbertOf4163 жыл бұрын
your videos have seriously taught me so much.. been in the trades for about 4 years now and it seems that im always learning something with your videos. Keep it up man!
@Art4164 жыл бұрын
Awesome corner bead work
@reyhanakturk50142 жыл бұрын
you did perfectly it looks very clean and smooth
@MrGoodCompany2 жыл бұрын
Thanks! I have some funky corners I'm working on just like that, and I was trying to figure the best way to finish them.
@lastof45123 жыл бұрын
Thank you always wondered about best beads for angles on stairway
@ejuncos2 жыл бұрын
The excellent presentation of your tutorial video shows your experience! Thank you!
@jennacat133 жыл бұрын
Thanks for making this video. Not all corners are 90° angles!
@marcinw46603 жыл бұрын
thank you. it would be great to see the final product (after paint is on)
@RedRyz3n Жыл бұрын
Awesome work!
@Interior_Works
Жыл бұрын
Thank you
@puttyman.paintpark Жыл бұрын
좋은영상 감사합니다!
@l.s.jonesy4363 жыл бұрын
Thank you
@ShahzadAli-ze4wg6 ай бұрын
Good 👍
@steverich35854 жыл бұрын
My question is who the hell framed it like that
@oddopops1327 Жыл бұрын
👍👍😊
@wendyroddick20712 жыл бұрын
how many coats of finishing mud did it take to cover the flex edge?I'm doing dry walled beams?I'm using standard tape at the the two ceiling inside joints of the box but the flex on the bottom edges.
@Interior_Works
2 жыл бұрын
After the flex is applied and dry, 2 coats of finishing mud is standard
@NitroRoo3 жыл бұрын
Thanks for the video. I have a house project with angles like this and I'm far from a pro. Here goes nothing...
@Interior_Works
3 жыл бұрын
The most important thing is having lots of mud on the corner, especially if the framing isn't straight, and also shaping the angle of the straightflex to match the corner angle. Rarely, if there's any spot not cooperating due to uneven framing, I'll pin it with a thumbtack until its dry and adhered. This is how all the finishers do these angles, at least where I live.
@CheekyMonkey8883 жыл бұрын
I notice you use both the strait-flex and their competitor from no-coat level line which do you preferÉ
@davidrivera3431
3 жыл бұрын
When u know what ur doing, anything works. I've used corner paper tape....
@timz1280 Жыл бұрын
I had an outside corner (obtuse angle) that cracked on me, using vinyl corner bead. What's the best way to redo that? I had to tear it off and am starting over. Should I fill void with 45 minute mud, then put corner bead on after it's dried?
@Interior_Works
Жыл бұрын
That's what I'd do, if it's a large void it helps to fill it for more solid surface area to adhere the bead. Sometimes the flexible bead retains some "spring" to it, and it unfolds/detaches before it dries, creasing it back and forth a few more times can help soften out the tension.
@carolinewells43552 жыл бұрын
what type of mud ? hot mud, all purpose?
@Interior_Works
2 жыл бұрын
All-purpose
@juelitochucas38842 жыл бұрын
What is the name that you put in corner
@Interior_Works
2 жыл бұрын
CGC Straight-flex original
@033randy2 жыл бұрын
Mix some Elmer’s glue into your mud. That will keep it from cracking in a couple of years
@davidlabossiere1905
2 жыл бұрын
truth be told, i know a guy who ran out of glue and mixed in some white dynaflex into some bathroom window skylight mud,
@davidrivera34313 жыл бұрын
We make it happen
@darenglover35353 жыл бұрын
Something tells me that you don't do this for a living...
@Interior_Works
3 жыл бұрын
What would that be
@xiSWIIFTix Жыл бұрын
What's the reason you fold it that way instead of the other way?
@Interior_Works
Жыл бұрын
It's hard to explain, but there's a subtle shape difference at the corner tip depending on which way it's folded. Makes a noticeable difference. It's all on the product instructions on the box.
Пікірлер: 36
Very helpful. I'm installing bead on everything in my basement bathroom install with one exception and will use Strait Flex for the one angle. This showed me how and confirmed that my existing vinyl bead I got today won't work. Thanks!
your videos have seriously taught me so much.. been in the trades for about 4 years now and it seems that im always learning something with your videos. Keep it up man!
Awesome corner bead work
you did perfectly it looks very clean and smooth
Thanks! I have some funky corners I'm working on just like that, and I was trying to figure the best way to finish them.
Thank you always wondered about best beads for angles on stairway
The excellent presentation of your tutorial video shows your experience! Thank you!
Thanks for making this video. Not all corners are 90° angles!
thank you. it would be great to see the final product (after paint is on)
Awesome work!
@Interior_Works
Жыл бұрын
Thank you
좋은영상 감사합니다!
Thank you
Good 👍
My question is who the hell framed it like that
👍👍😊
how many coats of finishing mud did it take to cover the flex edge?I'm doing dry walled beams?I'm using standard tape at the the two ceiling inside joints of the box but the flex on the bottom edges.
@Interior_Works
2 жыл бұрын
After the flex is applied and dry, 2 coats of finishing mud is standard
Thanks for the video. I have a house project with angles like this and I'm far from a pro. Here goes nothing...
@Interior_Works
3 жыл бұрын
The most important thing is having lots of mud on the corner, especially if the framing isn't straight, and also shaping the angle of the straightflex to match the corner angle. Rarely, if there's any spot not cooperating due to uneven framing, I'll pin it with a thumbtack until its dry and adhered. This is how all the finishers do these angles, at least where I live.
I notice you use both the strait-flex and their competitor from no-coat level line which do you preferÉ
@davidrivera3431
3 жыл бұрын
When u know what ur doing, anything works. I've used corner paper tape....
I had an outside corner (obtuse angle) that cracked on me, using vinyl corner bead. What's the best way to redo that? I had to tear it off and am starting over. Should I fill void with 45 minute mud, then put corner bead on after it's dried?
@Interior_Works
Жыл бұрын
That's what I'd do, if it's a large void it helps to fill it for more solid surface area to adhere the bead. Sometimes the flexible bead retains some "spring" to it, and it unfolds/detaches before it dries, creasing it back and forth a few more times can help soften out the tension.
what type of mud ? hot mud, all purpose?
@Interior_Works
2 жыл бұрын
All-purpose
What is the name that you put in corner
@Interior_Works
2 жыл бұрын
CGC Straight-flex original
Mix some Elmer’s glue into your mud. That will keep it from cracking in a couple of years
@davidlabossiere1905
2 жыл бұрын
truth be told, i know a guy who ran out of glue and mixed in some white dynaflex into some bathroom window skylight mud,
We make it happen
Something tells me that you don't do this for a living...
@Interior_Works
3 жыл бұрын
What would that be
What's the reason you fold it that way instead of the other way?
@Interior_Works
Жыл бұрын
It's hard to explain, but there's a subtle shape difference at the corner tip depending on which way it's folded. Makes a noticeable difference. It's all on the product instructions on the box.
@xiSWIIFTix
Жыл бұрын
@@Interior_Works alright, thanks bro!