Parts used in this video: Strait-Flex Perfect 90 Inside Corner Tape: amzn.to/2O03Vvw MARSHALLTOWN 10-Inch Taping Knife: amzn.to/2NZh1ZR

@normhodgkinson6965

5 жыл бұрын

Jeff, when you're videoing light colored surfaces, and applying light colored material, its difficult to really get a good perspective on what you are doing. its something like 'snow blind'. maybe something like a work light could provide better definition .

The way you apply your mud shows me your experience level.

Thank you thank you for explaining and going slow thank you thank you thank you. Do you have any other drywall taping and so-called mudding videos cause you're doing one for the corner how about for on the walls and any on fixing ceiling cracks?

@jeffostroff

2 жыл бұрын

I plan to, but check out Paul Pack Drywall channel, kzread.infovideos he's the best he has boatloads of videos in all categories of drywall repair, taping, mudding, ceiling repair, etc. I lives 3 hours north of me, super nice guy and best drywall videos

@mothersson2002

2 жыл бұрын

@@jeffostroff yes I did it's good but you go step by step much slower at least in this video that I saw.

What do you at an intersection if the ends of the tape are cut straight intead of a triangle. Does the tape get overlapped?

@jeffostroff

2 жыл бұрын

I butt the edges up together, do not overlap

👍

Perfect 90 better for home owner / diyer. Don't have to play in corners , can mud both sides same time , less chance at bubbling from mistakes.

@jeffostroff

2 жыл бұрын

IT was fun using this product

That's kind of hard just mud to line.

@jeffostroff

3 жыл бұрын

Takes a bit to get used to but very doable.

This is my first attempt at using mud and doing quite well I think. I'm using perfect 90 and my first attempt was only so-so. Forget their instructions regarding only covering the printing. If you do that, sanding in the corners will rip up the tape covering the plastic behind it. Put the mud on all the way to the corner and feather out 6 inches. Like paper, only do one side at a time and let dry thoroughly. Now the corners look great.

@jeffostroff

4 жыл бұрын

It does take a bit of effort to get used to working with it, but onc eyou find your way it works good.

@louisgholland709

3 жыл бұрын

What if do thin layers

Have you ever tried finishing drywall without tape?

@jeffostroff

4 жыл бұрын

No I always use tape because I don't ever want to see any of my seams between 2 pieces of dry wall develop a crack later.

The directions on the box tells you to put the printed side to the wall with the laminate strips facing out. you put it on backwards. you mud upto the laminate edge.

@jeffostroff

4 жыл бұрын

David if you install it the way you just described how you think it should be, it is YOU doing it wrong. You misread the instructions/ On page 2 of the instructions step 1, it says "Print side faces out from corner". You are saying print side faces wall, which is wrong. In fact, laminate side has to be against the wall, it is the spine of the Perfect 90 tape. I installed this textbook according to the Instructions: images.homedepot-static.com/catalog/pdfImages/0e/0e63e685-2465-4607-aed1-bd67865a74ec.pdf

@Bruderoutdoors

4 жыл бұрын

Print goes out

@louisgholland709

3 жыл бұрын

@@Bruderoutdoors can use for corner Beeds

Really? I hate to be negative but your instructions are really off the mark. Even for someone who is obviously a DIY’r, it’s slow, cumbersome, and inefficient the way you do this. Sorry, but I really have to point out the issues