Control Arms Ball Joint And Tie Rod Replaced Infiniti G35 Nissan 350z g37
This weekend , I got the chance to replace the front end on My Dads G35.
Complete Kit /// Front Upper Lower Ball Joints Control Arms Inner Outer Tie Rods for 350z G35 amzn.to/2qDhSUX
Lisle 45750 Inner Tie Rod Tool amzn.to/2JMeyzx
Astro 7865 Ball Joint Service Tool Kit with 4-wheel Drive Adapters
amzn.to/2GYNvhI
Neiko 03068A 1/2-Inch Drive Extendable Ratchet Handle
amzn.to/33M3nQq
TEKTON WRN77164 Extra Long Flex-Head Ratcheting Box End Wrench Set with Store and Go Keeper, Metric, 8 mm - 19 mm, 6-Piece amzn.to/2JKo1r2
Milwaukee 2767-20 M18 Fuel High Torque 1/2-Inch Impact Wrench with Friction Ringamzn.to/2xKjAb9
Thanks For Watching and Please Subscribe kzread.info_c... #g35 #350z
Пікірлер: 342
This video made me buy an impact and rebuild my entire front end. I didn't want to but the video took control of me. Plus I didn't know my bushings we so worn out causing my tire to wear. Replaced struts too. Great Job, couldn't have done it without you!!
I wouldn't recommend anyone buy these kits from companies for a cheaper price. The components went bad for me after a few years and when I started looking for better ones I found one lower control arm from the dealership or any OE part costs almost as much as the entire kit. Upper control arm ~300 a set, tie rods ~60 each. just know the parts in these kits are cheap and will not last nearly as long as OEM equipment and you will probably spend more replacing them again after 20k
Will this work 4 awd
Where did you get the smaller electric drill ?
do not attempt if you dont have all the tools, this man came prepared..
About to do this work on my car. Do you recommended doing everything or just the item that requires replacement? (lower control arm).
awesome job
How did the parts hold up?
I consider myself to be a decent mechanic but after watching this video I have decided to take it to the shop instead! Great job on the the video!!Thank you for sharing
do you have any idea how the parts are now after 1 year of posting the video?
Ok so,
Finally someone that does the job right on youtube. Well done and great angles.
good work man! you made it look painless. Thank You for showing how to get those cones off on the upper control arm!
This is amazing video..first time someone showed how to knock out the lower ball joint with a hammer on a 350z nissan setup I been struggling to get them out ..I just take off the spindel like you did. make it more easier to work on Thanks for sharing.
you made everything look so easy which im sure it is when you have all the right tools
I pushed the bushings out and pressed on new ones instead but yeah I can see the appeal of just dropping in new parts. except they're probably not as good as OEM. the bushings if you just want urethane they're only like 35 bucks. I got a small shop press from harbor freight and still ended up saving.
The video does flow well. Very instructive without too much instruction
Damn I gotta Invest in a impact 😂 turning wrench’s and fighting rust is time consuming 😂
Thank you so much I never ever comment on things
Great video , you’re helping lots of people out there .