if you loo it the video of the rear duro bump stops you can see the u-bolts hit the frame, normally when you put that style u-bolt that has the treads facing up you are supposed to trim the threads down to 1/4 to 1/2 of an inch above the nuts, i thin that will also help as on those bigger bumps you will not be so harsh. also with out trimming them down will prevent frame damage ;)

Nice video. I have the archive garage rear bumps and their u bolt flip. I have stock fronts as of right now. One thing I noticed is you might want to cut your u bolts off down close to the nut. The bump stop might compress enough for your frame rail to hit the u bolt and that would not be a fun time.

@208Tyler

4 ай бұрын

Ya, the u-bolts definitely do need to be trimmed! Although I can’t imagine smacking the bumpstop much harder than I did in the video, haha

Actually the OEM Bump stops are not even really bump stops. Your shocks will blow out. Thanks for your channel! Finding this kind of stuff has helped steer me in the right direction.

@208Tyler

3 ай бұрын

Mmmm, the OEM bumpstops are designed to work with OEM suspension. They should protect that at least. But, if you’re gonna get nice shocks, getting nice bumpstops should probably be on your list too Thanks for watching and commenting, I appreciate it!

Great footage. It took me a while to find video of the durobumps in action. Seems like its basically a nicer version of the oem setup tuned for offroadong.

@208Tyler

2 ай бұрын

Thank you! Ya that’s an accurate summary. Just a more robust part

awesome video man!

@208Tyler

4 ай бұрын

Thank you! Thanks for watching

I bought me a 4runner and it's my frist 4x4 that i want to use for daily driver, weekend camping/overlanding no rock crawling and some road trips. Upon searching I saw a post somewhere where it was commented that rubber bumps should be the frist thing that you should really upgrade. Any thoguhts into performance to cost ratio between this brand, sumosrpings and the new commer Pete Perry parts. Cant find a single video that compares any, all videos are always a sponsor, or they were sent to the company to review at "no cost"

@208Tyler

3 ай бұрын

These are my first bumpstops. I couldn’t tell you if any of the others are better or worse.

Good content bro.

@208Tyler

4 ай бұрын

Thank you!

So, looking at the slomo of the front Durobumps, I noticed that your lower control arms move quite a bit at the frame. You may need to look at your LCA bushings…

@208Tyler

3 ай бұрын

Good catch! I'm seeing some movement, but I also feel like it's warped by the camera shaking.

Great vídeo as usual! If I only lifted the front I should only replace the front bumstop? Or You recommend to upgrade all of them?

@208Tyler

4 ай бұрын

Since these don't mess with suspension travel, you should be fine to put them on either end, stock or lifted. I would upgrade all of them if you can!

I just purchased a front set for my 04 Tundra. With the air bag setup in the rear I don't need them.

Sick truck! And well done video. You’re in Boise yeah?

@208Tyler

4 ай бұрын

Thank you! Yep, Boise area

Nice! Do you have wheel spacers on the front? If so what thickness.

@208Tyler

4 ай бұрын

I do not! Just the stock wheels

overpriced. I rather get energy suspension for way less.