Coinco 9302GX MDB Tips #3 For
Ғылым және технология
Please enjoy this intro video #3 with a few tips about Coinco MDB coin mech plus a little on the Coinco 3 tube 24 and 110 volt dummy 12 pin mechs. #vending_machines made by Coinco from the 1980s and 1990s and even the new decade 2000. If you have questions, let's see them in the comment section so everyone can see and learn. I have about 10 different videos planned for the next up and coming videos. We will most likely add more as time goes on. If I can teach you anything here or give you a valuable tip, I call it a successful day.
I hope these videos make your journey less painful as you run into minor or major issues with your vending #equipment.
My next video # 4 will be released on Wednesday of each week.
This weeks featured coin mech links,
dougbaleenterprises.com/shop/...
dougbaleenterprises.com/shop/...
dougbaleenterprises.com/shop/...
Stay Strong people, we will survive. Below are some helpful groups and a link to 1 of my websites.
The best full line #vending_group on Facebook
/ 1070404776340697
The best #vending_machine classified group on Facebook
/ 725794780950900
My group for #vendingchangers, parts, supplies and service.
I'll let you decide how good it is while staying humble :)
/ americanchanger
Here is my website with lots of parts and information that should be helpful to you and your business. dougbaleenterprises.com
Thanks for viewing and kindly subscribe if you have not already :)
Thanks for being a part of my channel.
Join our Patreon program to keep us on the road continuing to bring you the quality videos that you deserve to see. :) / dougbale
Пікірлер: 53
Thanks for your videos. You’re the best 👍🏻
your the man Doug thanks for the knowledge!!
@dougsworldtour3755
9 ай бұрын
I'm glad your here, Stay Strong!
Helpful video thank you for making it :)
Thank you so much!
THANK YOU
This helped me out a lot, thank you so much!
@dougsworldtour3755
3 жыл бұрын
I'm glad your here, you help the channel by being a part. TY!
@dougsworldtour3755
3 жыл бұрын
Glad you found us!
First time here! Got a 3401 model and trying to figure and learn how to use it! May be asking a bunch of questions starting today!
I have a question about the 3 little switches behind the flight deck. @27:51, it shows the switches. One says lo .25. What are those for?
I have the 9302 gx and I can’t get it to power on. Can you offer help
Hey Doug. Great video and thank you for sharing. Any chance you could make a video on the 9302 L? Just got one and having issues. Thanks!
This is very helpful video, Question: how we can change the price on this model? do you have any video explaining?
@dougsworldtour3755
10 ай бұрын
When operating a MDB system, the pricing is done through the control board unlike a single price machine where the pricing is changed in the coin mech itself. Hope this helps.
@worldcitizen2030
10 ай бұрын
@@dougsworldtour3755 Hi there, I have the same coin acceptor which accepts sterling. How can I program it to accept euro?
Thanks so much for this video! Can you explain the positions of the 3 dip switches? ABC. I think mine are wrong since they are all up. I have a 9300-L that the change just keeps coming out. I just bought the machine used. I'm so greatful for this video!!!!
Good, helpful video. I don’t like working with the “plastics” with all the snapping of tabs, etc., though I understand why they are so ubiquitous. Even so, I prefer metal mechs (NRI) with all their temperamental mood swings.
@dougsworldtour3755
2 жыл бұрын
agree, but we are in a plastic World, everything is meant to be thrown away once it fails, not good in my mind.
Hey man love the vide thank you for all the tips. Was hoping you’d cover my issue but you didn’t 😅 would you happen to know why when I plug in the coin harness to the control board the control bird turns off and when I unplug it it comes back on and functions normally(except it doesn’t take bills or credit them or coins) if you have an answer for me I’d appreciate it alot thank you so much
@dougsworldtour3755
Жыл бұрын
write me, lasvegascoinop@gmail.com thx
can you make a video of repairing a coin return button on a USI 3185?
My keypad says use exact change only, and when I put a coin in it just slides out. My red light is on, and I tested the circuit board and solenoids and they’re all working. I cleaned the sensors I have no clue what’s wrong
@dougsworldtour3755
4 ай бұрын
This is why it is always a good ides to have a spare coin mech with you to find out what's wrong in 60 secs. These will fit any MDB system and they are cheap. dougbaleenterprises.com/shop/ols/products/coinco-9302gx-mdb-3-tube-rebuilt-coin-mech
What is the most common issue when coins get stuck under the plate in flight deck, just opposite of the top solenoid? My 9302gx is constantly getting coins stuck behind that plate.
@dougsworldtour3755
2 жыл бұрын
In a Coinco there are 2 solenoids and the small plungers often break. They are located behind the rear access panel on the rear of the flite deck.
Hola tengo un coinco dex 9300 puedo calibrarlo sin el tester? Como hago? En argentina no encuentro quien lo haga
i don't think me coin machine is bad, it takes coins but after last coin it lights up, exact change only. but dose not let you get idem. and no change returned
@dougsworldtour3755
2 жыл бұрын
If no change is returned, the lower 3 slides may be sticky, often caused by a can or bottle exploding in the machine. These slides are easily cleaned but disassembly is required. Carrying a spare mech and validator is highly recommended.
What is the max price that you can charge for sodas on a coinco 9300 15 pin 24 volt 3 dip switch coin mech please ?
@dougsworldtour3755
2 жыл бұрын
The price for the product is determined in the machine, not the coin mech.
My coin machine will only read one coin then reject the rest coins and do you know what the issue with the unit is?
@dougsworldtour3755
7 ай бұрын
send pics of what your working with to lasvegascoinop@gmail.com thanks
Hey, I just purchased a vending machine and it accepts quarters but won’t read Canadian $1 or $2? Any help would be greatly appreciated! I can’t find much on “loonies” and “twoonies” sh
@dougsworldtour3755
3 ай бұрын
Depends on the coin mech if is will take the Loonies
HOW DO YOU CHANGE THE AMOUNT OF THE SODA FROM .75 TO A $1.00?THERE IS INLY 3 SWITCHES ON THIS MODEL AND THE ONE I HAVE.
@PersonalUseChannel
8 ай бұрын
you have to do it from digital panel or main vending mother board with switch. this model does not have that function.
@wisconsinbush2940
6 ай бұрын
@@PersonalUseChannelwhat are the dip switches for then?
@PersonalUseChannel
6 ай бұрын
@@wisconsinbush2940 they are for switching between Canadian and US coins.
@PersonalUseChannel
6 ай бұрын
@@wisconsinbush2940 it switches from US coins to Canadian coins.
what if the coins are getting accepted and reading but they are not refilling the tube, it is just going into the coin bucket. Is there a way to correct it so that they go into the tube to refill?
@dougsworldtour3755
3 жыл бұрын
depending on the coin mech, if the hi lo setting is set to low, that's exactly what's its doing, keeping the tubes. Post a pic of the coin mech in our coin changer help group for more help Scott. facebook.com/groups/AmericanChanger
@scottiesisland101
3 жыл бұрын
@@dougsworldtour3755 I have a coinco the same brand and believe model in the video. I keep have to refill it manually. Is there a reset or anything I can do without sending it in. I live in the Caribbean so sending things to get fixed like this really become costly. thanks in advance
@dougsworldtour3755
2 жыл бұрын
The flite deck has a problem and is not directing the coins to the correct tubes.
@scottiesisland101
2 жыл бұрын
@@dougsworldtour3755 thanks - is there a way that I can resolve it? I live in the Caribbean so sending things back to get fixed is very expensive and time consuming. Appreciate any advise.
@dougsworldtour3755
2 жыл бұрын
@@scottiesisland101 Take a look at this video, I open up the flite deck to show you where the problems are. kzread.info/dash/bejne/mnp3tsmBl8WagtI.html
why my coin mech doesn't link with the bill collector?
@dougsworldtour3755
Ай бұрын
You might need a harness or the correct coin mech that has hookups for a validator.
why not showing one that is completely dead "no red light " ?
@dougsworldtour3755
2 жыл бұрын
In that case it would usually have an electronic component failure, such as a part.
@nery200043
2 жыл бұрын
That’s what I’m looking for , which capacitor is the one that usually fails when is not a red light. Thank you for your reply.
@dougsworldtour3755
2 жыл бұрын
@@nery200043 The 470UF X 35 Volts
@nery200043
2 жыл бұрын
@@dougsworldtour3755 thanks