Thanks for the great video! Clear and concise with great instruction.

Hi, is there an available AC motor and controller? I would like to improve my solar golf cart by adding regenerative braking.

great information, do you need to change the controller when you upgrade to faster motor? Thanks

I wonder why my motor on a 08 club car presedent has the blue wire on F1 and orange F2. I did the whole kit from d&d with the 11.4hp motor and 500amp controller and solenoid. My question is would it be ok to put 72volts going to it.

No test drive? Before and after speed / torque difference?

I have a club car 2001 48 volt serial number starts with AA . What is the best way to increase power

Is it necessary to upgrade the battery cables to 4 guage when switching to a high speed motor? My new motor seemed to gradually slow and then abruptly stop working for 5 minutes or so and then start working again.

Hey Barry, am interested in this d&d motor for my 2014 precedent. Do you know anything about having to relocate a rear shock mount and how to fabricate. Appreciate any help you have

I am looking for a smoother ride. Do I replace just the shocks or is it better to replace the existing leaf springs with heavy duty leaf springs with no shock absorbers?

Barry --on my 2011 Club Car Precedent 48 v 3.3 amp motor Curtis controller spped is 14.5 mph stock tires wheels. new batteries, now questions: do all I need to get 20 mph is a new hi speed motor? specifically I will have to do nothing to the controller? or wiring? I know if I increase my tires wheel sizes I can get more- but id be ok with 20 mph or so-- for some reason the spped code number I got through a local cc dealer from club car will not work? for some reason other dealers want to re-work my cart and id not be happy spending what they asking to do the motor tire controller scenario.

Great channel! quick question- is it easier to remove the back seats etc to Get to the motor? Or just jack up the back end etc? Looking to swap my stock motor/controller for a high power one. I have 6in lift with 23in tires. I need torque for mud/work things! 2008 CC precedent! Thank you! ~Shane

Hey Barry, Having problems with my 2010 club cart not speeding up, feels like it stays in 1 gear .have replaced the switch under the gas pedal and the solenoid and the resistor, could it be the speed control or the high speed motor magnetic...it will click some time and try to pickup speed but cut back ....im at a stump..any advice ??? thanks

I love the videos that Barry provides, but as fun as they are, the price of the parts that he is purchasing is very high for my "comfort zone" if you will. I do have a 2008 E-Z-GO 36v with larger tires, a radio and a back fold down seat, but other than that it is completely stock. I was wondering if anyone could inform me of how to increase speed and/or torque without breaking the bank.

Does this installation also apply to a DS? I just bought a new motor from you guys for my 1999 DS and looking to install this week.

I got a 2007 Club Car Precedent. Put 23x10 14R Wheels and Tires on it with lift. Now hills are impossible. what motor would you recommend to upgrade too? And on the 2007 is there any speed controller change or upgrade needed ?

What Voltage was the motor you swapped out. 36V. Or 48 V. ? Will it work on a 36v motor. ?

If you upgrade to one of these motors, does the speed code still have to change, let's say to 4?

Would I need to upgrade anything else when I do this motor swap on my club car

How much faster than stock will it go? Does it us more battery on a 48 volt?

Good video, but when I phoned the company to ask a few clarifying questions the person on the other end had no knowledge and told me to go to the website (which is where my questions originated). A better trained person could have made a sale.

Does anyone know what size the drive unit motor mount bolts are? Accidentally threw mine away.

I'm curious what the speed difference is between the stock and Speed motors, and also how Speed Codes 4 or 5 affects the Speed Motor?

@diygolfcart

9 жыл бұрын

Butch S That is a very loaded question with so many different questionable variations. Golf Car Brand versus other Brand's, Motor Brand versus Motor Brand. We could be all day discussing Motor Amperage Draw combined with each manufacturer's stated Horse Power Rating. Not to even mention the Voltages of the golf car, (36v vs. 48v). Speed Codes raise the Governing Knee Point, which is the actual speed that the Controller was programmed at from the factory. The Knee Point can be raised allowing the car to gain about 2 to 3 mph per Code Number.

@adolfovargas9632

6 жыл бұрын

Butch S I have an 87 club car and I need more speed. will this or interchange with existing one?

@HellcatAlley1

4 жыл бұрын

DIY Golf Cart I have a 2014 club car precedent 48 volt, will upgrading the motor make it run faster? Or will the code still limit the speed? I live in a very hilly area and want better performance as well

I work on several golf carts my main concern is that we have two president golf carts with two bad controllers. They were caused by two other co-workers who didn't know what to do. I've heard of turbo motors that don't require a controller. Do you know anything about this?

@diygolfcart

6 жыл бұрын

Never heard of those.

What kind of speed does the new motor produce?

What’s the cheapest easiest way to speed up a 08 club car precedent?

Is it possible to remove a motor from underneath the cart without removing the rear body? Working on a 94 Club Car at the moment.

@diygolfcart

4 жыл бұрын

Yes, that's the way I normally remove a motor.

@jayortiz5192

4 жыл бұрын

Thank you for the fast response. You guys are awesome!

@stevecaton180

3 жыл бұрын

That very helpful knowing that you don’t have to take off the rear body

My cart has 48 volt lithium ion batteries. Can I make the same conversion?

How much torque do these have?

No before and after speed test?

I have a 1995 Club Car. It's in great condition except it is very sluggish on a slight uphill. Is there an inexpensive way to increase power a little ? If not I understand a high performance motor as illustrated in video but is that all that needs to be done , just motor? Thank you I love your videos :)

Did I miss the controller upgrade? Can the existing controller provide the amperage from 3hp going to 10hp? 2,500 watts - 10000 watts?

@diygolfcart

6 жыл бұрын

By just adding this speed motor the controller didn't have to be upgraded. I'm not sure about the watts in a electric motor?

Where can I get a new motor like the one you have change. The blue one?

@diygolfcart

5 жыл бұрын

Give us a call so we can discuss your golf cart and what you'd like to accomplish with it. 855-349-4653

Where to find upgrade motor and what to name them? Secondly I have messed up the wiring connection to battery , The car runs but I lost the headlights and radio, can you put the dia gram of connections. Thanks

@diygolfcart

8 жыл бұрын

+alfred franklin email me at barry@diygolfcart.com with the serial number of your golf cart, manufacturer and battery voltage, then I'll be able to send you a wiring diagram. I won't be able to add one for the lights because each aftermarket light company has different wiring colors.

@naifalnaif2166

7 жыл бұрын

Car diguones

club car 2 passengers Can I change the speed to 40 ~ 50km?

@diygolfcart

5 жыл бұрын

It can be done. It's expensive!

I have s 09 president mod club it jumps wen you puch the pedle

How fast can it go

You never showed hooking up the speed sensor...nor the need to upgrade the orange and blue wire....??

show me on a ezgo

Is a new motor the only way to increase speed?

@jakefontaine229

7 жыл бұрын

Brian Riley no upgraded chip got my lofted 48v going 26

@maxum3300

7 жыл бұрын

Brian Riley what chip do you have and where did you get it?

@evelynwilliams7466

6 жыл бұрын

Jake Fontaine what's a upgrade chip? Apparently my ph serial number doesn't work with a code program

@JoshMG

5 жыл бұрын

@@jakefontaine229?? what chip? Where did you get it?

I try to remove the motor is hard to pulled out what can I do?

@diygolfcart

6 жыл бұрын

Slowly use a screwdriver to pry the motor off the input shaft on the pry points. Patients.....

@davidzubiri5766

6 жыл бұрын

DIY Golf Cart thanks

what is the kind of this motor ?

@diygolfcart

8 жыл бұрын

+Tamer Esam The motor taken out was a Advanced DC and the one put in was a D&D.

how in the hell can you make this video and NOT tell us how much more speed it made are you even serious? to not think of that?

Adding a new motor upgrade doesn't increase the speed unless reprogrammed

How fast ??

@diygolfcart

4 жыл бұрын

I believe this motor got us up to around 19mph.

@19032527

4 жыл бұрын

DIY Golf Cart how fast standard ? Yes,14.8 mph ?

@diygolfcart

4 жыл бұрын

@@19032527 11 to 15 mph

@karbs76

4 жыл бұрын

Mine goes 20 mph on a standard motor

@guentergirkinger2856

4 жыл бұрын

Marc how?

this a vidia on howta fix ya Shit working mhhhkayy

Great vid on how to do it. Would be nice to see some before and after performance footage of some sort. Also curious if any other controller parts needed to be upgraded to handle this new motor.

@diygolfcart

5 жыл бұрын

Thanks for watching! A lot of "Speed Motors" don't have to have a controller upgrade. Only Torque Motors have to have controller upgrades.

Barry I realize that when you're doing these tutorials, that most of the time you're talking to novices. But could you please quit being so condescending? It comes off as though you're talking to children trying to do these repairs. Most are most likely grown men just trying to fix their carts.

@Cool-Trees

7 жыл бұрын

I think that you may be confusing southern drawl with a condescending tone. As a "grown man" I found nothing condescending about this video.

@TheAllstardan

6 жыл бұрын

The only one being condescending here is you TJ. Fortunately, Barry is willing to use his time and energy to film, edit and then post these informative and useful DIY tutorials. He concisely explains the process as he works, appeasing the "novice" DIYers, while hoping the experts with the double masters in mechanical and electrical engineering, such as yourself, can stifle your justified annoyance. Thank you Barry and please keep the videos coming, 99.99% of "grown men" appreciate what you do.

@rayandrejewski916

3 жыл бұрын

Barry is NOT condescending. He has a pleasant lilt to his manner of speaking which I find pleasant. If you like a monotone speaking voice, that's your prerogative.

@avpowerstn1

2 жыл бұрын

Barry is welcome at my house for Harris Ranch Ribeye (Cali)..anytime. You would get a frozen Costco Hamburger....enjoy...lol lol