I love that Paul adds a little humor in his daily videos. I try and listen to them as often as i can. I have learnt quite a lot. Thanks

@nicksnowbuildings

Жыл бұрын

I love the man, a true gem and a breath of fresh air in an audiophile community that is often so serious and lacking in self awareness. God bless him, I wish him all the best.

@David-ik8wj

Жыл бұрын

definitely getting more smarter about hi fi technology.

I had dilemma. I needed a new stove for my sauna and also a new amp, but only had money for one of them. I was torn. Until I tested a class A amp. Now have new stove and a new amp.

@WalterReade

Жыл бұрын

Tosi hauska

@marcbungener1877

Жыл бұрын

I’m the one who asked the question to Paul and before I had…tube monoblocs but actually it did not made living room a sauna 😂

@johnpetrakis379

Жыл бұрын

@@marcbungener1877 Well, they just weren't big enough. Been toasted by some at shows, and your living room wasn't small enough

@abecollins2266

Жыл бұрын

I had a Pass Labs Aleph 3 Class A amp that doubled as a room heater and stove to cook my fried egg breakfast. It pulled 250-watts from the AC mains to produce a meager 30-wpc of audio. It may have sounded decent if it weren't for my "real world" speakers and the power they required to come alive.

@stLtBilko

Жыл бұрын

Lol

great explanation! thanks... Marantz Model 30...another absolute beauty, class D, not fatiguing, but extremely resolving! fantastic amp...

Many thanks for answering the question. Much appreciated.

Great video Paul! Very informative.

Brilliant response Paul. Thank you. Seán

Great explanation Paul. I would suggest, in general, for those people who fancy audio as a hobby, that they should get a hearing analysis to determine their individual loss issues. Many comments below - MIGHT - be somewhat related to their own ears. Especially in those above 40! I am above 60! I My eq and dampening and other room mods in my audio room are for me - specifically. I can listen for hours and not get fatigued. I would also say to others understand that some recordings are also less than optimal and can cause fatigue on any system. Unfortunately some of those recordings were made long ago and the artists have since passed, so it's what we have or nothing. Great channel, great advice from you as always!

@Andrew-rc3vh

9 күн бұрын

You can use AI to improve imperfections in old recording equipment as long as the information is there in some form. For example if the tape machine recording it was not keeping a constant speed the AI will figure out the correction needed if the speed variations were non-random, e.g. a roller was very slightly elliptical.

I agree! I can listen to my expensive class D amplifier I installed in my car allll day. Tune it correctly with a DSP and you get what you pay for (most the time). But it’s not always so broad, it is the smaller details such as the filtering and even quality of parts or wires how they’re ran and if the crossovers are wrong, the type of transformer, etc. all makes a difference to determine the company’s goal for how they want the sound or price of manufacturing

Ah, clarity re class D. I have a Chinese SMSL class D, but listen at low levels. Now I understand why I have no problem with fatigue listening to detailed classical like string quartets, piano solos and the like. The detailed rendition of the class D amp feeds me for the same reason Earle Scruggs playing country banjo does. But I notice that at higher volumes my beloved details sound harsh. Bingo, you nailed it Paul.

Lovely as always!

Hi Paul, thsnk you again for the explanations on fatique. A few tubes in front will make music sing more, have more "soul" as we say here. I've updated tweaked and adjusted some things in my and others setup through your tips and tricks, , so it sounds a lot better. Thanks again 👌

Some of the earliest high-power Class-D amps were the Peavey DECA sound reinforcement amps made in the mid 1980's. They sounded great, and were even used in some recording studios for driving monitors. But part of their good sound might have been the fact that their pulse rate was 500kHz, much higher than most Class D amps. This allowed the reconstruction filters to be tuned to a much higher frequency, which reduced their phase shift in the top (audible) octave.

@peteleoni9665

Жыл бұрын

I tried to play bass through one of those in the 80s. It would simply go "blank" for a second...Very clean for hifi though.

@sonus289

Жыл бұрын

I still have a few of the deca's . Theye were lousy for low freq material, but decent for playback. I have one of the peavey digital power converters (dpc 1000) from the 90's that seem to have low efficiency from gain. 500w on it is weak compared to a 500w qsc of similar age. Seems like the manufacturers got the digital thing more stable than it used to be. I have a ashdown retroglide 750 that competes with my old carvin r1000 in bridge mode

@wilsont1010

6 күн бұрын

Is it a typical issue for Class D amp that a drum beat can easily distort the smoothness of the vocal?

@ScottGrammer

6 күн бұрын

@@wilsont1010 I've not heard of this. I can say, though, that Class D amps can do odd things when driven into clipping, depending on their design. This may be what you're referring to.

I own several amplifiers, including a Class D, two solid state Class A/B, two tube single-ended and two tube push pull. I find my Class D amp to sound quite good. Very clear, very good imaging, great bass definition and power. I do not hesitate to use it for critical listening.

@scottypalmer2158

Жыл бұрын

I agree. But some of the cheaper class D amps can sound sterile and lacking in dynamics, however I've never experienced fatigue.

@Tamilpasanga664

Жыл бұрын

@@scottypalmer2158 Wat about TPA3251

@scottypalmer2158

Жыл бұрын

@@Tamilpasanga664 : One of the best class D's for cheap. Get one with a removable Op Amp and install a Sparkos Labs Op amp...then a good power supply.

@Tamilpasanga664

Жыл бұрын

@@scottypalmer2158 my swan hivi M50MKiii speaker sound worst, do need to add any external DAC

@Tamilpasanga664

Жыл бұрын

@@scottypalmer2158 can change power supply board? will it make improve the sound quality

I have a pair of M1200s and agree 100% no fatigue after DAYS of immersive listening! Bravo to PS Audio!

In my opinion: The class D amps of today are not the evil many make them out to be. Sure, back in the early days, they could be nasty, but now, most all the issues have been licked. I'd say that 99% of fatigue comes from the speakers used with the amp and not so much the amps themselves. The fault of the amps in the grand scheme is what side of neutral they tend to lean towards. Pairing up lively speakers with a class D amp will cause fatigue because class D amps are lively. Pairing up lively speakers with a class A or A/B amp balances things out and will not be fatiguing. Example: Wilsons are lively speakers (I personally don't care for them, but that is just my taste). Wilsons are better paired with class A or A/B and even then, they can be fatiguing if not dialed in well. Speakers that lean towards the warm side of neutral (tilted down) pair well with class D amps. It is not limited to "commercial" class D amps (in this case "commercial" means big names like Marantz, etc. I assume and most of Marantz's two channel amps are class A/B actually), one can make a PS Audio class D amp fatiguing by pairing up speakers that emphasize the output, although putting a tube in the input path greatly helps to diminish said fatigue. I also think it is not brand specific.

@scottypalmer2158

Жыл бұрын

My experience mirrors yours. If the intended speakers have a naturally warm character then class D without fatigue. Pair a class D amp with bright speakers and you might develop problems. In my experience the class D amps generally present more detail but less dynamics than A or A/B.

@doctormidnight

Жыл бұрын

My Focals sound just "meh" on my digital amp, almost annoyingly analytical and detailed. I really prefer it with my OG PSB Alphas, ProAc response, and Wharfedale Rubiance 27s. In that order. Sorry Tarun, I just think the PSBs sound a bit flatter!

@jdlech

Жыл бұрын

I agree, it took 40 years for engineers to master class A and AB. It's taking 40 years to master class D. But we're getting to the point where class D can surpass even the best A and AB amps ever designed. 50 years from now, everything will be class D, and all other classes will be relegated to the esoteric. Not necessarily better, just different. I've already seen measurements of a class D amp that forced the lab to get new test equipment precise enough to measure the THD and S/N ratio. It was so low their standard test equipment couldn't measure it. Couple that with power efficiency over 90% in some cases, and the other class amps start to look antiquated.

@Thomas..Anderson

Жыл бұрын

I guess class D- amps are evil. They take the oil away from snake oil sellers.

@davidperry4013

7 ай бұрын

I have pioneer A-9 amp from 1981 and Q Acoustic 3020i and it has a nice homely sound. The sound just feels like home. Q Acoustics speaker have a tendency to sound homely.

Hi Paul, I am a subscriber. I have a unrelated to Class D Amp question. I have a Denon DRA-800H Receiver rated to 4 -16 Ohms. It has 2 Channels for Stereo (and video connections which I do not use at this time). I have connected 1 Pair of Elac Debut 6.2 speakers to Channel A , and 1 pair of Elac Debut Reference 6.2s to channel B. The Elacs are 6 Ohms nominally rated. They sound terrific played simultaneously or separately. However, as a Student of Audiophilism (at 71 YO), I learned that the Ohms ratings have an impact on the Receiver /Amp. I use 14 gauge copper speaker wire running perhaps 12-18 feet form the Receiver. At first, due to my laziness and ignorance, I wired the two speakers in parallel to one channel. That overheated the Receiver at 60 volume levels. It shut down with its Protective Circuitry. Then I wired the channels separately : 1 pair to Channel A and the other pair to Channel B. The Denon still gets Hot (has not shut down, but it is getting hot). Is there anything other than getting rid of the Elacs that i can use to "boost" the Ohms handling of the Denon? If I connect 2 other pairs of dislike speakers But with 8 Ohms ratings, it's fine. No Overheating to this extent. Appreciate your advice . THX for your terrific work.

A thoughtful and informative expert opinion which counters some of the irrational anti class D prejudice. I have March Audio mono blocks which use Bruno Butzeys class D modules which I find very engaging and not at all fatiguing.

Yeah you make great videos my man, they're very informative thank you, What about class D amplification using discreet outputs?, I feel that would give a decent sound & without the fatigue if you don't use over bright components

Nice and informational. Thx

Great video.

I have Crown Class D amps ... fou of them one for each frequency and one for my double subs. I had turned my speakers into active speakers and got rid of the passive crossovers, while using a DBX active crossover between my preamp and the Crowns ...I think they are detailed, focused with great accurate imaging...but to me, never fatiguing. I know everyone wants to say and are greatly convicted that theirs is the best;however, I just know I like mine and there are others who have listened and were impressed by them. The point is: if you like the way hopefully your system sounds...that is all that matters. Enjoy....

@carltoncotter2614

Жыл бұрын

I remember a long conversation with Crown in Elkhart years ago, when I was switching away from Audio Research, Mark Levinson and Crown A/B amps. Their guy (who struck me as very knowledgeable) told me everything was changing and suggested I try one of their XLS amps if I was an "audiophile". I used it for years and it sounded pretty good but would love to know what might be better without paying "snake oil" prices?

Paul is so knowledgeable when talking about music reproduction. Things are becoming so good that they are by passing our ears ability to hear. There are so many choices today of Great systems it makes it hard to decide what to buy. I guess people just need to find what they like to hear and not worry about what others like. I’m happy with my system and will probably die with it. I built my stereo room for the speakers and stereo that I installed. Everything was built to suit my speakers so they could breathe properly. In my opinion the speakers are your music. Lots of amps ect can push the speakers and so many are Great that the sound is really relies on the speakers and room than anything else. Just my opinion but I would always invest in speakers before anything else ! They are the Soul, Heart of any Great stereo system !

@jdlech

Жыл бұрын

Everyone in the audiophile community laughed at the pioneers of psychoacoustics. But now look where we are - surround sound everything.

Thanks Sir for the info

This sounds a lot like when CDs first came out. A lot of folks said the sound was "harsh". All my amps are AB connected to JBLs and Jamo. But I do have a desktop amp that is class D to a pair of Triad bookshelf. I think they are fine. Maybe swapping for a more "mellow" speaker would make the class D amps less fatiguing?

I love class D for my 5 string bass guitar amp. It has a choice of tube or solid state input stages (which can be combined) but I love that an 8 pound amp putting out 800 watts RMS is the size of a the size of a 2" thick book. I started bass in the late 70s. and a 300 watt tube or solid state bass amp then were huge, heavy, and hot. I marvel at how little heat this generates at such a small size and light weight.

@miguellogistics984

Жыл бұрын

Well understood why you like it. I just do not get the mids that I like out of the Shuttle Max 12.0 and the Shuttle Max 12.2 was just Double Violin/Flat Wound Dark Tube Modeled Power Section. I ended up leaning on the Copper Toroidal Power Transformers of the NEOX400, GBE600 and the GBE1200. They are all laying about me right now, yes even the ShuttleMaxs. I really need to sell those.

@clemmcguinness1087

6 ай бұрын

What is this amplifier please?

I appreciate this video, Paul - thank you for posting it. Last year I bought a Crown XLS 1000 class D amp to use for amplifying a keyboard rig through a pair of vintage Acoustic 807 three-way cabinets just because my 1980s QSC amplifier is just so heavy and is a 3U as opposed to the Crown's 2U. I really appreciate the flexibility of having the built-in digital filters so that you can implement biamping, use a subwoofer, etc. more easily. But it does have more of a noise floor than the QSC has which isn't that big a deal on a gig but if I'm working with the rig at low volumes at home it's more noticeable.

@zeusapollo8688

Жыл бұрын

I do like some acoustic cabs

@hubbsllc

Жыл бұрын

@@zeusapollo8688 Sadly the pair of 807s I bought had one blown original 4"x10" horn (implemented as a midrange) that I was able to at least get back from the previous owner in trade for the replacement that was in there. There seem to be only two drop-in replacements for sale in the US; one has a plastic horn and one has a metal horn. The metal-horned one has a very peaky response and the whole cab sounds off with it installed. I put the one working original in its place and that improved things a lot.

@zeusapollo8688

Жыл бұрын

@@hubbsllc I have some big acoustic horns. Wood front. I will look at the model number when I get home. 4 inch driver sounds about right

@zeusapollo8688

Жыл бұрын

824

I'm used to technics SUV-85 integrated amplifier class AA with JBL 4312 speakers. It weighs alot but sounds excellent.

Dear Paul, I'm Tjerk from The Netherlands. I love your videos, the way you explain things is very educating and fun to listen to. My question for you is: I used to have a separate pre amp and power amp. But I upgraded to a new all in one amp with separate power supplie for the pre amp. Do you think separate pre and power amps have a big future? Or is development catching up and is the need for that less and less ? Hope to hear from you :) lot's of love Tjerk

@connorduke4619

Жыл бұрын

He has answered this question before somewhere.

@daniellesmith1059

Жыл бұрын

I have done some work with independent amps. Had coupling problems, like the power amp clips early. So I like the integrated system. I do not like class D.

Over 10 years with a Lyngdorf SDA2175 Power. Only just returned to Class A\B. Rotel RB991 which is driving Spendor S8E.

Many years ago I did play with some Harrison Class D amplifiers, a lot of RFI from them but great sound. I realise that is subjective though.

There are pdm direct amplifying modulators as well.

the TAS6424-Q1 might be an interesting chip, it's an automotive class d amplifier chip switching at 2.1MHz, i believe that this can have really minimal filtering and thus minimal phase shift? now ofcourse automotive, and 75W don't scream performance or SQ but it'd be interesting to see more amplifiers reach higher switching speeds, because that will eventually eliminate the need for a low pass filter at all as in the end the inductance of the speaker cables themselves will act as the filters (when it reaches a high enough frequency)

I have an old console that I use a class d amp in. We play Christmas music on it just about all of December. It's background music so really no fatigue. I imagine it would be if it was my main system, what can you expect for $75

Hi Paul, I have a Audiolab 6000a class a/b amplifier My display reads prt???flashes on and off for 30 seconds and then goes into standby mode standby mode . I can operate a turntable or a cd for that 30 seconds. Before it shuts downs We had a power surge week And it affected my pvr for the tv and killed a doz leds In the ceiling I’m so puzzled ? Any ideas How to restore my amp ? It’s only 4 yrs old , or is it toast ? Best regards , Lorenz

Mark Levinson does makes a pretty decent class D as well (53?) i think; sounds weird but it's okay. I did tried coupling a transformer on the output of a 3-watt chip amp and it does sounds interesting, but not that great. I think the problem with class D is that you need a really clean power section; a direct box or tube input will help, but a clean DC rail is still required otherwise the amp sounds different on silent and loud recording, just like you said! good response.

My question to Paul is “ why do I need 1200watts @ 4 ohms by using M1200”? I am using his S300 with a tube pre-amp and I rarely turn the knob over 10 or 11 o’ clock. I can EQ the sound via tone controls on the pre-amp. S300 was a tad fatiguing & dry ( at higher volumes) with XP10. Now, sound has altered. I am sticking with class D as I cannot compromise on bass

you say fatiguing is that where the listener gets stressed to where they fatigue or is it where the filter caps and coils degrade and fail? sort of like what happens to capacitors in vintage tube stuff where they can get leaky and even short destroying power stages and even becoming dangerous and deadly (death cap) where they can leak the full 110 or 220 to the metal frame shocking the user as often that stuff did not have a widened prong so you can plug it in backwards?

I have a pair of Bel Canto M300 monoblocs that I simply love. They pair perfectly with my upgraded CSS 1-TDX. However, I'm not sure I'd put them on my Cornwalls or JBL L100s. I have a Marantz 2330 set up with those and the synergy seems spot on. Personally, I believe the published specs on the 1-TDX are generous and they actually are less sensitive than reported and really came alive when I put the Bel Canto's on them.

What about all the d class amplifiers I mean produced modules. When one failes user/service can easily replace it by the same module or it requires some regulations to match to existing setup? Old amplifiers as we know can serve for decades. Class D is quite new approach and I'm curios if it's a reliable solution for long years

How would purifi class D 3-channel amp hold up to a Mark Levinson 533H (AB) power amp? I am interested in the musical abilities, not just power. (E.g. D-Sonic, BuckEye, or NuPrime)

ICEpower? HEDD uses these in their flagship studio monitors. Do they suffer the same filter issue?

I've gone from the big house flagship system as an electronics engineer to a medium sized 2.1 class D amp based on a TI chipset development board powered with a Meanwell SMPS. I enjoy beautiful detail and find that a little 6j5 preamp adds just a little sugar to the mix.

@HobbesJunior

Жыл бұрын

i¨ve often wondered what a decent tube preamp could do, (and ordered faulty tube amps home, so never got around to it ,,, since analog input via e.g. records, smacks any digital input, in regards to bandwidth and thus bass performance ,,,, could a simple preamp solution mimmic this , or is it more just a bit nice colouring it gives ,,, ,,, i will have to test it again, ith upcoming setup ,,, :)

@HobbesJunior

Жыл бұрын

ps pascal audio sell d modules with near 130 db dynamic range,,, they run cold at full loads, since they pass on nearly all the power, to the speaker,,, big plus for class d ... and good powersupplies resonate at upwards ½ million hz, thus able to reproduce one order of magnitude lower freq. up to 50 khz ,,, new class "d" tech power supplies, came from medical scanners, as most or some of you probably know :) ...

@scottypalmer2158

Жыл бұрын

I totally agree. My $800 15lb Hafler amp barely gets used. Changing Op Amps when permitted can be sonically rewarding too. I really like the Sparkos Labs Op Amps.

What about fully digital amps like Technics SU-R1000? Isn't it a new approach to class d ampifiers?

I'm an audiophile at home. AND I own a live blues music venue in Gifu, Japan. My speakers are all Class D QSC. K12.2, KS118, and CP12. No problems with them, as some people might know. Anyway, live music is not fatiguing if the band is exciting. I have endless compliments on our sound from both the audience and musicians alike. I find that the Class D amps along with our LED ADJ lights are very efficient powerwise. Can anybody here comment on the quality of the amps in my powered QSC speakers? I know that they're having quality control issues on some parts, but the design itself seems to be very well made. Again, it's not home audio, but relevant to Class D amps. Personally, I'm beyond impressed with the live sound quality. Our source gear is high end as well and doesn't need to be addressed unless one thinks so. Thanks!

@jordanmetcalfe8302

Жыл бұрын

QSC build quality isn't fantastic, they're on the lower end as far as PA goes. There's a reason systems from the like of L'Acoustics, Coda Audio and D&B Audiotechnik use external amplification.

@johnreardon4944

Жыл бұрын

@@jordanmetcalfe8302 I'm not familiar with those brands. I'll check them out. Thank you! I'm using powered speakers because space in my venue is extremely limited. It's in Japan. However, I'm wanting to buy a much larger building soon so your suggestion is very helpful. Availability and cost of imported gear is another factor for me too. QSC was my best option when I opened two years ago. The new RCF speakers are just now becoming available here I saw recently.

@raybin6873

Жыл бұрын

@@johnreardon4944 I've seen many powered speaker systems not hold up well when driven hard. I've had amplifiers with cracked circuit boards...went back to using external amp system. I've been doing live stage sound since 1980's. I think the powered speaker stuff is more of a marketing ploy. 👍

@johnreardon4944

Жыл бұрын

@@raybin6873 I understand your point. Thank you. That's what I've been worrying about with QSC's latest problems. I'm not positive, but because I bought my K12.2s and KS118 early on, I'm hoping to be safe from the problems with their later batches. My saving grace might be that I don't play my speakers loud. At all. My K12.2s are at unity and my KS118 sub is at minus 7. For real. Headroom is what has been successful for me thus far, not volume. So if I do get a bigger venue, I could sell my speakers and invest in separates. Your advice is taken seriously. I will say this though. The QSC CP12 speakers are phenomenal as monitors. I've never heard anything bad about them having any problems. They are very underated for what they are. Reviews and forums speak ultra highly of them. So at first, I will definitely keep those and try to invest in your knowledge of separates for at least my PAs and subs. Pros and cons of powered speakers vs separates are not to be overlooked lightly in my case. But sound quality is always my priority. Headroom is also a big factor, I know. And so overkill on wattage is a plus for quality speakers. Just last weekend, even with my current QSC system, our rare acoustic gig with vocals were heard with ease and without any stress from the speakers. I'm guessing that you're on to something higher quality than what what I've already been impressed with. I'm looking forward to discovering something new to ensure that my venue stays number one in my area. I'm already getting high end talent playing there so....

John Urlick’s Spectron Musician iI Amplifier was truly a breakthrough in Class D technology some 20+years ago. Might even compete in today’s world favorably!

I'm also using icepower 1200AS2. I'm quite satisfied with the sound I got

For those using inexpensive class D amps place a HIGH value resistor say between 330 Ohms and 560 Ohms across the speaker terminals. You will need to experiment to find what you like. It has very little effect on the speaker impedance and won't overload the amp.

I don’t have any PS audio gear but I have same power drill you guys use. Step by step, I’ll get there 😂

@geddylee501

Жыл бұрын

Lol

I would say that it’s all about your ears! I own a Technics SUV-3 class AB Whilst a good Amp when I first owned it it was in my view to much top end and low on bass now I am some what older it sounds better as my hearing has changed , I have always had big speakers , much better Bass response , I have recently built my own Mono block 100w class AB and it performs better than a commercial unit by comparison, with a good music uncompressed source it , can produce 1khz square wave at full power indefinitely into an 8 ohm load , and at 10khz and is still square very little rounding would no normally test at that frequency but just tried to see how good it was , do the same to a commercial amp it just cuts out protection circuit kicks in ! Overall my home brew is great very pleased with the results, the first amp I built was a 3 watt stereo class A valve amp EF86 EL84 I was 14 years old at the time . The 100W amp is a MOSFET using industrial MOSFETs I had access too,

same for me, listener fatigue sets in early for me when listening to music thru my (admittedly, low-class) Class D Fosi V3 amplifier from Amazon. i'm not sure if the bright & shouty, in-your-face, sound is typical of Class D amplifiers, since I've only had a real good listen to the Fosi V3, which is a rather impressive-sounding amp for its size, but it can also be like nails on a chalkboard after listening for a while. Maybe the higher end Class D amps are better sounding, similar to Class AB? There's just something about using PWM to 'chop up' the music (waveform) before delivering it to the speakers that I think makes Class D sound decidedly discordant, to my ears.

Unfortunately, often it depends on the recording. Especially with a new setup revealing more details and better dynamic I discoverd, that some of my recordings start to fatique me, and some came to life.

I really like how Paul doesn't bash the competition and even acknowledges another brand of speaker.

Some musicians are great to listen to once or twice at a listening session, listen to them anymore and you may feel like everything in your system is wrong. One of those Musicians for me is Steve Morse solo and with his Dregs Band. Steve Morse is a Fabulous Musician who surrounds himself with other Fabulous Musicians, but I listen to him more than 2x a day, Boom,, at first I blamed my system too, but I noticed that I felt the same way listening to Steve Morse's Music thru a Boom Box . Lol

All I know is the last class d I dealt with was a Denon av. It was both the clearest and most distorted amplifier I've ever heard. Some music just couldn't help but distort all over with it. Mostly heavy mid sounds it just couldn't deal with.

I had an early class d amp, the Bel Canto Evo. I now have the Nad M33 with the Bruno Putzeys output stage. I hate to say it, but class D ain't there yet. There is something lifeless about the mid range and highs. They are great at dynamics, bass and clarity, but something is definitely missing. Manufacturers have many tricks to hide the deficiencies, but..

@abecollins2266

Жыл бұрын

What amp are you comparing the modern class D NAD M33 to when you say "class D ain't there yet"?

@richardramorino3319

Жыл бұрын

@@abecollins2266 in what I would call "the big and meaty" category I would include my McCormack DNA 500, Musical Fidelity, Harman Kardon HK 990, and BAT. In the "just the facts please" category various Benchmark Media stuff, and due to my second hand connections to the music/music management industry, various professional amps going all the way back to the now defunct Uni-sync brand in the 1980's. I generally like Italian speakers ( Sonus Faber Cremona) and am now eyeing a pair of Van Alstine mono blocks for my Rosso Fiorentino floorstanders.

@simplereef4854

Жыл бұрын

I agree. I never any class D amp. Class D amp tends to have 3 rd order harmonic distortion that make the sound brittle and bright. Not my taste!

@bradatherton9369

Жыл бұрын

@R L What are you talking about, a 'perfectly amplified input'? No amplifier is perfect, every amplifier has some amount of distortion. If you learned that in school then I want to sign up for that class ;)

@bradatherton9369

Жыл бұрын

@R L If that's what you want to believe you are free to believe it, but that doesn't make it right. You're obviously convinced of your belief so I'll not try to sway you.

"our products, our class d products - never fatiguing never" - bold statement that cannot be true as every person's hearing is different. - I'm tired myself of the class A, AB, D 'battle'.

I bought a $200 clsass D amp 3 years ago and it sounds really "scratchy" in the upper treble. Now I just recently bought a $50 class D amp and it's treble compares well with my AU $1,800 class AB amp! (But not in bass, unfortuneately.) So in the last 3 years, class D seems to have improved a LOT! Better chips, I reckon, and more affordable better chips.

I saw that title and my mind was blown

I used to listen at way higher volumes when I had smaller speakers but now have literal towers of speakers (almost as tall as me) and only ever need to turn it up to 1/4 volume for it to be at a good level, (I have a class D amp), it is quite loud at that level. If I'm emotional and need to get that feeling of power from loud music I might turn it up to 1/3 volume. I listen to music for most of the day usually (I'm disabled so don't have much else to do most of the time)

Bang and Olufsen ICE power class D we’re at the forefront we’re they not ? I use a Beogram 3300 turntable Soundsmith cartridge with a Project DS2 valve pre amp with a Bang and Olufsen Beocenter 2 with a Beolab 19 sub with Beolab 8000 mk2 with a pair of Townshend audio super tweeters. Class D sounds fine by me ???

Gotta agree here I'm using ice power as1200 boards 2x600 watts with a valve preamp. Bliss !!! and both together cost maybe the price of one audiofools RCA cable ( yeah one )

Great video, though on a budget, I'll stay with a class a-b amps, but refurbished

I own a set of Krell Monoblocks FBP 350 MC. after some research i want to listen to the 1200's I hope they will charm my ears as the big Krells have done for 23 years. My main motivation is I need something lighter in weight and does not run up my electric bill. I'm getting too old to be lugging these around. The Krells are linear class A 100 percent. It will be interesting to compare these technologies and hopefully the 1200"s will be keepers.

Never had a fatiguing amp,,, , for me the culprit has always been cd players that sound harsh, brittle and glassy and in the end fatiguing,,, so good luck out there with the class d amps, didn't even know of this problem

My N.A.D. C388. is great. I think I've never heard anything else. But I listen to it all day with great pleasure. I'm new to all this but can someone answer this question. I switched from a single pair of speaker wires to bi wiring a+b channels into speakers. This greatly improved output volume and clarity. Why? And is the power split 50/50. Or is there something else going on?

@Stephen-nd1sx

Жыл бұрын

SVS SoundPath Ultra Speaker Cable - Banana-Banana - 10ft (3.1m) 12 gauge I went from one pair to two. If you can suggest a better option for cables I'd like to hear your opinion. What would be significantly better without being hundreds and hundreds of dollars!

@Stephen-nd1sx

Жыл бұрын

I hope the package is new speaker cables. Lol.

I designed and built my first class D amplifier in 1979, agree the filters are the hardest to get right

I have a Peachtree DAC and Amp that I have never found fatiguing but I also don't do critical listening for 2 hours at a time, maybe they would be fatiguing if I did.

What makes them fatiguing ? Especially if they sound good at first?

Stay tuned for "perfect" class d amp from PS Audio, which will sound exactly the same as the other decent class d amps but will be utterly "non fatiguing" And so it goes.

@peteleoni9665

Жыл бұрын

Oil de snake' Oui Oui!

idk i came from car audio but now home audioi always hated class d amps unless for subs i was strickly class ab for speakers until the ayimya A07 amp it sounds like a class ab amp an very accurate , theres so much out there on it but i also have a crown xls 1001 an i tryd it uses ice modules i hate it , but im glad things are progressing to where amps sounds class ab cuz i think we all lover that warm sound , but why not just get a class ab amp? but i tryd class ab on subs i love it but class d just makes sense but i love where tech is going , i always hated class d sound to sterile no life but that has changed, im excited for the future

Fatigue is a function of overall volume and frequency distribution. It has nothing to do with amplifier class.

@thd9041

Жыл бұрын

I was disappointed reading all the comments until i read yours Mr Winer

I have used tpa3110 tpa3118. They were okay, but the similar 3110 had different gains. I have used tpa 3116d2 , and mosfet class d power amps with regular components non smd components. These class d don't last long like the class ab types, class AB are robust.

What causes the fatigue? Phase shift or filtering?

Hi Paul. I was wondering if class D amps using GaNFETs have a different sound?

Tried Audiophonics hpa-T400et (class D 3 channel purifi!!!) and sent it back. Treble was too harsh with most songs on my focal electra 926s... bass was wonderfull though. The stereo amp version (hpa-S400et) was tested on asr and came out as one of the best ever. Now I am scared to try other class D amps.

@markwinston3119

8 ай бұрын

Thats because the electra is harsh on the top end. You would never have a problem with current day Class D if your speakers were neutral.

@WimHulpia

7 ай бұрын

Thank you Mark. Yes this also came to my mind. I own Sopra No1s now and these are definetily better at the top end. But I since I sent the HPA-T400ET back, I cannot check. I do consider to give it another try next year. Thanks for your feedback@@markwinston3119

Purifi is the first class D amp module that really addresses the key issues that cause class D amp fatigue. There are a few things. One, most class D amps have not historically been load invariant, and they have tended to have better response up too than down low under load. This means they’re often quite bright. Second, the iron core inductors used for output filtering tend to cause distortion in the upper frequencies, which humans find very fatiguing. Purifi is both load invariant, and has a special feedback loop around the inductor to reduce that distortion to sub-audible levels.

@sebastianjaramillo5049

9 ай бұрын

the first one was the Ncore by bruno putzeys, the purifi is the refined one by bruno too, the latest nilay is the best one so far by bruno of course

What about Extraudio 250T Class AD? Any experience?

I find that the more detailed the sound the more fatiguing it is due to my brain having to deal with more sound information coming into my ears. I cannot let the sound just 'wash over' me.

almost all my amps are class d. what i like about them is the power density. 4000w out of a amp that weighs like 5kg! (behringer inuke nu6000). in my car i have soundigital amps (sd400.4d evo4 and sd3000.1 evo4) and they are very efficient and have a ton of power and the amps are SUPER small! (the 3kw amp is the size of 2 monster cans!)

@jaakko200987654321

Жыл бұрын

forgot to add: the behringer has very good sound but its a little fatiguing. the SD's are not fatiguing at all

I own Wyred 4 Sound ST-1000 mk II and ST-500 mk II amps, and a pair of PS Audio M700 monos, and none of them are fatiguing. They sound incredibly clean, are dead-silent, have tons of power, and run barely warm to the touch. My speakers are Dunlavy SC-Vs, which are incredibly accurate and revealing, so if Class D was an issue, I'd hear it.

@billymartin3160

Жыл бұрын

I have wyred 4 sound STI-500-v2 and i'm having issues at higher volumes. Did a direct comparison to my 40 year old Sansui AU-717 class AB. The sti 500 cannot handle a busy sound at high volumes. I feel like if there is a lot happening in the music, the sound gets very jumbled and almost muddy. I can crank on the Sansui waaaay louder than the wyred 4 sound without the sound falling apart. Tekton speakers. Any ideas?

Hello friend do you ever have trouble with electrical interference from harassment tech I have sound variation a lot recently

Di you repair Car Audio Amplifiers?

Hi Paul, Bruno Putzeys is with Kii Audio and Purifi for the last 8 years now.

Yep, I have great Class A/B (Parasound 2125v2, Arcam AVR5) and shitty Class A/B (Emotiva BasX-A3, Denon x3700H). I also have great Class D (NAD C298 which is similar to NAD M23, Parasound Zonemaster 2)...no ear fatigue with a quality Class D. Apple Music lossless

Class D amps themselves don't have a colour to their sound, that's the best part, as long as the output filter is made with decent components it should be absolutely fine! The hardest part is pairing speakers with them, as most speaker manufacturers do their R&D with AB amps, so they colour the sound of the speakers based off amps with a completely different tone to class D

Unless you're doing blind A/B testing, its probably bunk. And I've never felt "nervously exhausted" after listening to 2 hours of music. Has Mark tried weed?

Maybe we have to wait for the PWM freq to get up into the MHz so the filters can be simplified so they don't have any musical effect.

Tripath fixed that problem decades ago. Those class T amps really sing. And they're dirt cheap. Please bring T amps back.

@user-xg6zz8qs3q

Жыл бұрын

@Douglas Blake Gosh darn! That's why nobody speaks of Tripath? So everything circles back to the TPA3255 and the Aiyima A07? This also makes me more intrigued about the Octavio Amp. It's like a Bluesound Powernode copycat product from France and it uses the TPA3250. The specs seem so underwhelming but Octavio made some mods to the circuit boards.

@user-xg6zz8qs3q

Жыл бұрын

@Douglas Blake Wondom still sells Tripath boards and finished amps. I have one of those amps. It's dirt cheap but only 10W. And it powers my fullrange drivers just fine.

As I and my ears get older I prefer more revealing.

Yes true

Great explanation, thank you for that. Curious, could you name some commercial brands suffering from fatigue. I have 3 class D in QSC (1200a and MX1500a) and Yamaha (P4500) wondering whether they're prone to that condition... Thanks again, cheers.

Bruno Putzeys and Lars Risbo at Purify.

My class D experience: bass and shimmers very good. Lacking in mids. Some vocals rendered nasal. Used a few. Linn Akurate best of the bunch. Sounds like my preferred high biased AB amps But for all its good bass, i find Class D not as tight/controlled a gain clone bass.

@miguellogistics984

Жыл бұрын

From your message you seem to be elaborating on something I noticed when working with Digital and Solid State Amplifiers for the Bass Guitar. I walked away from this long ago and had to read to remember that the Digital ultra light amps were Class-D. In my work with two models. one modeled to sound as a tube amp, and the other a straight forward design, I did not enjoy the Tube Model on the Power System (the PreAmp shared the 12AX7 tube, so the Power Sections were the difference,) and I preferred the First Issue Class-D. BUT! Weight being no object, and the tone being far more inspiring, I was very excited with the Toroidal Power Sections of 425W@4Ohms and 1200W@2Ohms of the same companies other amps. Copper made the instrument sing and inspiring. It was a Mid range clearly missing from the Original Class-D and High Clarity that the Tube Modeler just did not give. So some of us hear things, others hear other things. But at my performances, people tended to gather on my side of the stage. Maybe what you hear is real?

@Exgol2005

Жыл бұрын

@@miguellogistics984 good to hear some affirmation that my ears still good for this hobby ;)

Of course the cure for this trouble will be found in an all-tube class D circuit. Can't wait for the product announcement. Thanks for laughing along.

@analoghardwaretops3976

Жыл бұрын

No you Don't have to laugh..... Much earlier.. (60- 80 years ago) most transmitter towers of AM / FM / SW ( 500KHz - 150 MHz) broadcast used tube output power stages ( that too in KW/MW ranges ) ...so it's NOT difficult to design & build one...even if just for experimental purposes...

@spacemissing

Жыл бұрын

@@analoghardwaretops3976 And they still do. You're dealing with a ham here (KJ6QKV).

@analoghardwaretops3976

Жыл бұрын

@@spacemissing good for you 👍 maybe you can give an idea of complexity & cost in building a class D tube amp..

Paul, you have someone on here acting as you. Great show to you though, thanks.

It sounds promising...the tube input stage is a natural progression...but what about adding a tube output stage in addition to the input stage? Would it add more "sweetness" to the overall presentation?

@stephenstevens6573

Жыл бұрын

@Douglas Blake I will accept your premise, because I am unaware of the conflict. Care to explain it for me? I truly am ignorant of the engineering difficulty.

@stephenstevens6573

Жыл бұрын

@Douglas Blake what about as a buffer?

@stephenstevens6573

Жыл бұрын

@Douglas Blake thank you

@stephenstevens6573

Жыл бұрын

@Douglas Blake I've been collecting and swapping equipment since the 70s . I've had about everything there is to have, except tubes. I guess the fact that I can't let go of my Magnapans is much the reason why..I'm on social security, so I don't have the money anymore to buy like I used to. Tubes have always fascinated me, but I never took the jump. The only experience I have is old Heathkit stuff from the 60s...my first 'system" and no...it wasn't very good...lol

@stephenstevens6573

Жыл бұрын

@Douglas Blake thank you for your opinion and insight

Like 2000 from Murten - Switzerland.

I tought you will advise to.change power plug and AC suppky cable while wrapping electric post outside the house in straw ornament and dance around signing voodoo.

Thanks for the PWM rap. I didn't know its the same method as Solar charge controllers use. All the cheaper ones use PWM. The new fancy one are MPPT. They do a I V sweep find the sweet spot for volts at the maximum power point.

@victortitov1740

Жыл бұрын

mppt and pwm are completely unrelated things, not alternative technologies. PWM + inductor and capacitor is a way to efficiently convert voltages. MPPT is a fancy feedback loop that tunes the voltage conversion ratio (which is still pwm-powered) to maximize the power drawn from solar cells.

@jonathanginofilippi

Жыл бұрын

Mppt is good because u can feed them more power. More volts is always a plus for solar for various reasons.

@dimension2788

Жыл бұрын

I just think its cool how sound tech and solar have parallels. Outback came out with the first MPPT charge controllers back in 2000 or so. Yes you run the panels in series strings up to 150 VDC then the MPPT circuit with the inductor capacitor ( L C) circuits down converts the voltage to the Max Power Point simultaneously raising the Amps. This is a win win for solar. I love sound and solar so its all just great! You sound and solar engineers are awesome!

I tried the Marantz Model 30 ($3200.00) and the same thing happened to me. Thank heavens Crutchfield had a return policy. I'll stick with my class A/B.