Checking Boat Speedometer on Yamaha Outboard
Yamaha Master Technician, Justin Austin, from Sonny's Marine Center in Orlando, Florida show you how to check and repair your boat speedometer on a Yamaha Outboard.
Yamaha Master Technician, Justin Austin, from Sonny's Marine Center in Orlando, Florida show you how to check and repair your boat speedometer on a Yamaha Outboard.
Пікірлер: 62
What I like about this fix is Justin... he is providing a fix that probably most marine technicians would just say "let me take a look and fix it" at the rate of 1 hour of service or more! I'm sure 90%+ of the time this fix will do the trick. Great video!
This guy is awesome, didn’t think I could get my Speedo to work at my age
Thanks Justin. Exactly the video and help I needed to fix the speedo on my 115 Yamaha. Cheers from Monaco, New Zealand.
Thank you. Not sure why anyone would give this a thumb down. My 200HPDI intake has been clogged up for years with wax and mud. Used the 1/16 bit with vice grips yesterday. Took some time, but worked great. I knew I was good when old filthy water came out. Thanks again.
Worked great Dude! Such an easy fix. Thanks for taking the time.
thank you, fixed my speedo following your directions.
Thank you 🙏🏼 this was answer to my prayer. I bought a whole new multifunction gauge cause I thought that was the problem. Glad it wasn’t and I glad I did not throw the old one away cause it wasn’t the problem.
What a terrific video. I remember when I choked Austin with my speedo
Awesome brief to the point video! I never Gave a thought as to how my speedo worked or why it quit. I followed Justin's instructions and blew out the lower Pitot tube, still didn't work. Disconnected the tube from the Speedo and that was the problem the tubing had cracked after 16 years and needed to be replaced. Replace for under 20 bucks Amazon next day!! Thanks much!!
@BishopTSellers
3 күн бұрын
Hey Steve can you provide the Amazon link for than lower tubing that's coming out of the lower part of the o/b. thanks
Thank you - I followed your advice to the tee … it worked perfectly. Thank you for your video !!
thanks for sharing your tips mate,,good job,
I;m new to all of this and it had me stumped why my speedo would not work, thank you for showing a bumb one like me how to fix it...
Great video thanks for making it.
Super helpful tip!! Thank you. I hope it fixes my issue with my digital speedometer.
Excellent video.
Tried this, and it worked. Thank-you.
Thanks! It's my first Yammie and I couldn't find the end of the tube. Appreciate it
Thanks!!!! This video helped solved my issue
Very good video easy to follow.
Thanks! Great instructions. Do you just pull that tube out with needlenose pliers where the air came out at the connection? It's pretty narrow there and I didn't want to break the tube.
Great Video and put me in the right direction. I have one problem, i broke the 1/16 drill bit cleaning it out. got to agressive. How do i fix it so I can use the motor speedometer?
Very good.....Actually.....EXCELLENT!!!......no bs instruction. You get a like a share and a subscribe!
Thank you, Justin. You save me $500
Fantastic and appreciated
Thank you!
Thanks man!
I have a question..... 2004 F60TLRC what is the factory setting for the pilot screw inside the carb? Thanks for the video. I hope to get my speedo working.
IT WORKED !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! THANKS !!!!!!!!!!!!!!!!!!!!!!
Thank you
NOW I know what that broken tube is for. THANK YOU!
@jesteronetime
7 жыл бұрын
me too....
Thank you for video
Thank you very much !!!!👍
Watched video went outside and cleared my speedo
Is this the same procedure for ox66 models? Thanks.
Sir, you are amazing. Thank you. I kept getting this cotton looking material out of it, and was scared to go any further.. Well, it was fully plugged up.. in fact, it was so badly plugged up, it was acting like a little old lady on a straight cheese diet. Appreciate the video!! If you're making any new videos, I'll sub. Just reply back and I'll smash that sub button..
After doing this, is the only way to know if it’s fixed is to get it in the water?
Thx mate.
how do you test a tachometer on a Yamaha 150 HP year 2000 2 cycle outboard ?
Appreciate it!!!
You rock
Thanks!
Can you do a video on how to fix rpm gauge on Yamaha outboard 115
👀TK. I like the video view 😂
Thanks
My 2015 has a small pin in the middle of the hole ... is that normal
Can I blow air from the other side to try the blow stuff out I think there is a piece of metal stuck in mine
Can I blow air from the other side to blow stuff out I think there is metal stuck in mine
👍👍👍👍👍
My favorite part is when he uses the blow gun
My rpm are low on my Yamaha 150 where do i start?
What about a cramped hose
I tried this the other day and gear oil started leaking out of the speedometer hole on the lower unit😮💨
how about tach fix
Mine has oil coming out of the hole any body no why
I had to watch this video twice, this handsome man that works so well with his hands is too distracting. Find some less attractive people for the helpful DIY.
This guy definitely wears tighty whities
that cost that poor soul 1000.00
@MaynardFreek
5 жыл бұрын
That saved me $1000
Thank you!