JOIN OUR EXCLUSIVE PROJECT SUPPORT GROUP With WEEKLY GROUP CALLS For Coaching On Farm Equipment Repair, Welding & Metal Fabrication! Its An Affordable, And Easy Skill-Building Program With Only A 1 Month Minimum! Learn About The Program Here: kzread.info/dash/bejne/fpas2rxtnJyynrg.html Join The Project Support Group Here: www.patreon.com/OWFA/membership

i got a cheap welder for 80 euro, when i was about 11, im 29 now still have it still use it at least once a week

I really enjoyed your video and was wondering about these machines and was a disbeliever for sure until I watched your review. The link you provided for a more modern machine looks to be a definite upgrade for less money~!! I have a Sears 230 amp machine that I have had for 50 yrs. and it is very heavy and hard to move around and seems to be time to retire it so you have made my mind up and by the way you have the finest attitude of anyone I have seen do this kind of thing so was happy to be a new subscriber~!! 💯👍

Been wanting to buy 1 of these for years now. I think this will be my Christmas present

Bought a cheap one of Amazon. Similar to his 160amp and I'll tell you I've run 5lbs of 3/32 7014 rods and it burns smooth. I bought it because I was desperate when my main welder went for jobsites. Cheaper than renting since it worked. Now I leave it on the truck for those quick repairs and it does good on 110 which surprised me on 3/16 steel.

@normabradley2544

Жыл бұрын

what make is it

@harisyoung4110

Жыл бұрын

@@normabradley2544 Deko is a decent quality welder that i had used almost 3years now.. the only downside is at 140amp i always use, it can't weld non-stop more than 30minutes, it need to stop and cool down after 20minutes..

Thanks for the review. I have a tomb stone welder. I have been wanting to to DC rods. I have done some research on the inverters. This helps me decide Thanks!!

Thanks Chuck-e. It's been a while. Are you still into farming ? 👍☺

At the ship building company I worked for we call the stick, electrode, or rod holder a “Welding Whip,” or just “Whip” for short.

Would love to see review some of the cheaper ones you put the links to!!

Man I really miss more of your welding videos. I am that guy, who wrote you about double shielded flux cored vire welding. I miss that videos, create more about welding. I miss old channel, also conservative like you.

Good news, since this video was filmed (2017 I think) inverter technology has gotten better, and cheaper! So today, for even less money, THIS is the cheapest stick welder (that looks decent) on Amazon: amzn.to/3JiYCmJ If you want the one in the video, this appears to be the closest thing to it: amzn.to/3CNXq8d If not, this one also looks pretty promising: amzn.to/3ieVImU MORE: For those who like the things which KZread doesnt, join us on a free mobile app called Telegram, under "Tractor Hoarders Group Chat", in case we get cancelled on here! Also, check out our Patreon page to help support the channel: www.patreon.com/OWFA?fan_landing=true SOME OF MY FAVORITE TOOLS: KNIPEX German Made Pliers-Wrench: amzn.to/35fchvN OTC Slide-Hammer Kit: amzn.to/3p7mq4Q Carbide Burrs - An Affordable Set That’ll Last: amzn.to/2VsxTgH SUNGLASSES I WEAR - Quality at twice the price: amzn.to/2VegmbE Regular Safety Glasses that I Use: amzn.to/2ATXtEf Yes, these are affiliate links. Thanks for watching!!

@mikeznel6048

2 жыл бұрын

Just came here to mention that lol. I still want to try a tig from there or one of those cheap eBay tigs. Just haven’t pulled the trigger yet.

@OldGuy70s

Жыл бұрын

Ever review a Canaweld from Canada... Prob too late now though, i already got 1 on the waY......A Dual Voltage 162 D Lift Tig/Stick...

@bcm20003

Жыл бұрын

Have you done a review on it? That would be nice to see.

@frankish5314

Жыл бұрын

Yup so now you can buy a 200A 110/220V machine with hot start for 75 bucks!!!

Great personality. Do all stick welders play music when a bead is being drawn? Can different music genres be selected?

Good Review, but what would be a lot better welder at the lowest Price ?

And here I thought JB Weld was the cheapest weld. Guess I learn something new everyday.

Bought a lincoln powercraft 180amp stick machine for 355aud. Does the job. Good for the porability when ya cant use the shop mig.

Pah. My 100v 15 amp Campbell Hausfeld was the cheapest of the cheap in the early 90s. Its plastic stick clamp handle disintegrated immediately. fortunately I was given another by a guy who bought a far better stick welder but thought its handle was too "cheap looking" so he gave his to me. The CH's bigly amp adjustment knob is hard to turn, goes on forever, and it boasts a weird clear plastic analog "slide gauge" with no markings on it so without drawing some of your own, you have no reference point. The stock ground clamp had all of four "teeth" on it, offered one square millimeter of contact, at best.

Looking to learn on a budget would you recommend it as a first welder?

Hi Thinking of buying one of these because obviously they are cheap and won’t be doing a lot of welding regularly. I’ve got some 8mm flat bars to butt joint together. Was told to bevel edges but what size of rod and amperage should I use .

My goodness, are you still out there kicking? I followed you many, many years ago when you were living somewhere up north before you moved to Texas!

What 200 amp (aprox) smaller welder do you recommend ?

You need to put a link to the air hammer you use.

so, not sure if you mentioned it, how much did this cost?

Xl voyager? I can dig it.

the 9mm (small) Dinse Style plug SHOULD do up to 180A at 100% Duty cycle and 190A at 60% Duty cycle with 25mm2 (maximum cable size for the 9mm dinse is 25mm2) cables. So the smaller plug is absolutely capable of the 160A advertised for this unit, the cable might not be up to the job, look like 16mm2 or something.

Looks like a rebranded 160 Everlast

How much was it again? LOL Thanks Chucky!

Isnt 6010 aq Dc rod?

My first welder was a Campbell Hausfeld 110v unit. Could only run 6013, but I cut my teeth on that thing with arc starting and puddle/ rod control.

@Ratkill9000

2 жыл бұрын

That brand is the one from Menards I believe right?

@scarling9367

2 жыл бұрын

@@Ratkill9000 That's where I got mine, yes. I think I've seen them i different stores periodically...TSC, Walmart, etc over the years.

Did he mention how much it actually was?

Is that a cold steel tanto?

@officialweldingfarmingarch2041

Жыл бұрын

It is, you noticed! :)

Hi, I recently bought a Amico electric, 200 amps multi-purpose 3 in1 welder, from Amazon. I got the the welder. However i discovered, it have a factory defect,(the wire speed dial isn't working). I informed Amazon about it. They asked that I return the item. However to do so is costing more than i bought it for. I am outside the usa. So I am left stuck with a a defective product. So i am looking for a solution.

@officialweldingfarmingarch2041

Жыл бұрын

you could try explaining the situation to your credit/debit card company, a lot of the time they can help with things like that

@lovewillfind884

Жыл бұрын

@@officialweldingfarmingarch2041 Appreciate the suggestion. Thank you.

How much was it lol 😅

Not sure you said how much that things costs . Will have to rewatch and see if you said 😆

@briantruck2284

Жыл бұрын

Lol

How much does it cost?

There's one on there right now for 59 bucks

How much did this cost again? I don't think he mentioned it 🤣

Can’t find it on Amazon Prime.

@MrJbills23

2 жыл бұрын

Not the same welder, but Deko Pro makes one comparable to this. Its currently on sale on Amazon.

@edstenson7764

2 жыл бұрын

@@MrJbills23 I picked up a similar Deko model and will be putting it thru some welds soon. Thank you.

@edstenson7764

2 жыл бұрын

Right out of the box the settings are just on a piece of paper inside the box, not printed on the machine, but they look pretty standard.

You think that's cheap. Try the cheapest in eBay. 70 dollars shipped. 110v welder. Works. Basically a rebrand harbor freight unit. Works. Kinda. Won't weld anything thin without complete blowby

So how much was this welder?

@scottdavis9442

2 жыл бұрын

I really wish he would have told us the price. 😁

@alabamamotionpictureproduc6626

2 жыл бұрын

Not sure

@rickmcdonald1557

2 жыл бұрын

🤣🤣🤣🤣🤣

You said it works but then saying it dies..?! It is confusing!

This is how Chinese warships are put together …🤪

Damn. Kinda makes you question a lot in life now.

Anyone else feel seasick for some weird reason

shenzhen huayilong , top manufactured in china

what a dud

Literally 2/3 of the video with no actual testing....

unwatchable

Funny thing is the welder in your link didn’t look the same?? It looked Cheap!! Check it out

How much did you pay for it?