Changing brake pads made simple 2016 Mercedes C63s
Mini Vlog… very few tools needed #mercedes #amg #benz #carguy #likeandsubscribe
Жүктеу.....
Пікірлер: 32
@lokeyjb Жыл бұрын
kzread.info/dash/bejne/fGSoprxqqtmzXc4.html D.I.Y rotor replacement full video 2016 C63s
@trygvefigenskau612010 ай бұрын
Thanks for blazing the trail for me. Very educational and appreciated.
@vinhphan7520 Жыл бұрын
great video, getting ready to change my front brakes , very helpful
@tournamentable6 ай бұрын
Simple, good job
@TheFlexxGarage Жыл бұрын
Great job on the video my man! Keep up the good work and I’m glad to see you continue to improve by investing in your channel with new equipment. #KeepMovingForward 😎🤙🏼
@lokeyjb
Жыл бұрын
Thank you so much… you have no idea how much I needed to hear this 💯
@becoming2531 Жыл бұрын
The quality is look good 👍
@reno6821 Жыл бұрын
Sheeeshh amazing video bro !
@lokeyjb
Жыл бұрын
Appreciate it!!
@A_jahv_inuh7 күн бұрын
Can u drop the link for the rear pads you used?
@cristianalfaro4973 Жыл бұрын
thanks for the video, I am changing my front pads and rotors and wanted to check if I need to drain the brake fluid after completing the job. I noticed you opened the reservoir cap but other than that you didn't mentioned anything about getting the air out of the system. Can you please point me in the right direction? thanks so much
@MrMicko
Жыл бұрын
Not needed, if you don't want to change the brake fluid at the same time. You need less force to push down caliber cylinders when the reservoir cap is open. Thats why you should open the cap.
@cexy63s Жыл бұрын
Great video!! I have to change mine on my 21’ was gonna make a video too
@lokeyjb
Жыл бұрын
Definitely should my friend. Thanks for your support. Thanks for the comment. 💯
@Isaac-pm1px3 ай бұрын
hey man do u know the torque specs in (nm) for those 2 rear brake bolts
@incentiveeee Жыл бұрын
Great video. Are you supposed to engage the workshop mode before unbolting any of the back caliper?
@cexy63s
Жыл бұрын
You should engage it before starting the rears fronts you gotta either drain the fluid or push it in
@lokeyjb
Жыл бұрын
Couldn’t have said it better myself 🔥🔥🔥
@user-if4dl6wt3x Жыл бұрын
If you KZread how to engage the shop mode it opens the pistons for you
@jybranolguin69983 ай бұрын
Did you bleed your brakes after?
@mohammadhatami9973 Жыл бұрын
tuff
@lokeyjb
Жыл бұрын
Thanks for watching 💯💯
@reeproduced3888 Жыл бұрын
How long did it take you to do all of this?
@lokeyjb
Жыл бұрын
Great question 🔥🔥🔥 Took me 3 maybe 4 hours trying to record and get all the camera angles and audio, right 😅 but this brake job shouldn’t take longer than an hour maybe an hour and a half
@ah237722 ай бұрын
Is there a difference between the brakes from a c63(467bhp) and c63s?
@mxrrss
Ай бұрын
S has bigger front brakes
@TTROJAN3 ай бұрын
Help me out a bunch brother
@gottliebdee26310 ай бұрын
Funny old vid this. In one vid says you don't need carbons and then within seconds says they suffer brake fade...... ANYBODY that does things like this on the net should provide proper info like torque settings and specifications for everything that they can. Whilst it is the responsibility of people doing the actual job it's not really responsible to only give half the instruction for the work at hand. Don't spray grease around like that, others will copy you and not be so careful. Take it off and grease it away from the assembly. Don't compromise yourself OR OTHERS on the road. There are too many videos on KZread doing things like this. Even journeymen like that blowhard Scotty Kilmer are guilty of this. The amount of money you save not going to the main stealer will more than pay for a torque wrench. The forums are full of the tech info you are looking for too.
@schmederling33983 ай бұрын
You reused the old clips...I suggest just but the full package brake kits...this metal clips get rusted...weakened...and will not be as strong as new ones...you could end up with issues...you are there always....its like a half ass job TBH...
@user-if4dl6wt3x Жыл бұрын
If you KZread how to engage the shop mode it opens the pistons for you
@xesytoob
Жыл бұрын
So if you engage that in workshop it will open the pistons on all axles?
@JR-rg9xl
10 ай бұрын
tried it nothing happened not sure if im doing something wrong I pressed ok didnt release the pressure on it also it was hard to take off ? anyone recommend what to do
Пікірлер: 32
kzread.info/dash/bejne/fGSoprxqqtmzXc4.html D.I.Y rotor replacement full video 2016 C63s
Thanks for blazing the trail for me. Very educational and appreciated.
great video, getting ready to change my front brakes , very helpful
Simple, good job
Great job on the video my man! Keep up the good work and I’m glad to see you continue to improve by investing in your channel with new equipment. #KeepMovingForward 😎🤙🏼
@lokeyjb
Жыл бұрын
Thank you so much… you have no idea how much I needed to hear this 💯
The quality is look good 👍
Sheeeshh amazing video bro !
@lokeyjb
Жыл бұрын
Appreciate it!!
Can u drop the link for the rear pads you used?
thanks for the video, I am changing my front pads and rotors and wanted to check if I need to drain the brake fluid after completing the job. I noticed you opened the reservoir cap but other than that you didn't mentioned anything about getting the air out of the system. Can you please point me in the right direction? thanks so much
@MrMicko
Жыл бұрын
Not needed, if you don't want to change the brake fluid at the same time. You need less force to push down caliber cylinders when the reservoir cap is open. Thats why you should open the cap.
Great video!! I have to change mine on my 21’ was gonna make a video too
@lokeyjb
Жыл бұрын
Definitely should my friend. Thanks for your support. Thanks for the comment. 💯
hey man do u know the torque specs in (nm) for those 2 rear brake bolts
Great video. Are you supposed to engage the workshop mode before unbolting any of the back caliper?
@cexy63s
Жыл бұрын
You should engage it before starting the rears fronts you gotta either drain the fluid or push it in
@lokeyjb
Жыл бұрын
Couldn’t have said it better myself 🔥🔥🔥
If you KZread how to engage the shop mode it opens the pistons for you
Did you bleed your brakes after?
tuff
@lokeyjb
Жыл бұрын
Thanks for watching 💯💯
How long did it take you to do all of this?
@lokeyjb
Жыл бұрын
Great question 🔥🔥🔥 Took me 3 maybe 4 hours trying to record and get all the camera angles and audio, right 😅 but this brake job shouldn’t take longer than an hour maybe an hour and a half
Is there a difference between the brakes from a c63(467bhp) and c63s?
@mxrrss
Ай бұрын
S has bigger front brakes
Help me out a bunch brother
Funny old vid this. In one vid says you don't need carbons and then within seconds says they suffer brake fade...... ANYBODY that does things like this on the net should provide proper info like torque settings and specifications for everything that they can. Whilst it is the responsibility of people doing the actual job it's not really responsible to only give half the instruction for the work at hand. Don't spray grease around like that, others will copy you and not be so careful. Take it off and grease it away from the assembly. Don't compromise yourself OR OTHERS on the road. There are too many videos on KZread doing things like this. Even journeymen like that blowhard Scotty Kilmer are guilty of this. The amount of money you save not going to the main stealer will more than pay for a torque wrench. The forums are full of the tech info you are looking for too.
You reused the old clips...I suggest just but the full package brake kits...this metal clips get rusted...weakened...and will not be as strong as new ones...you could end up with issues...you are there always....its like a half ass job TBH...
If you KZread how to engage the shop mode it opens the pistons for you
@xesytoob
Жыл бұрын
So if you engage that in workshop it will open the pistons on all axles?
@JR-rg9xl
10 ай бұрын
tried it nothing happened not sure if im doing something wrong I pressed ok didnt release the pressure on it also it was hard to take off ? anyone recommend what to do