Update: symptoms came back to which I unscrewed the o2 sensor. All the carbon I blew out of the exhaust attached to the sensor making it pitch black. Bought mass airflow sensor cleaner to remove the carbon, then reinstalled. Seems to be working for now, will comment again if symptoms come back.
@dakingrowe2537
Rebuilding back my 2006 CBR600rr. Your videos for this bike have been amazing with your explanation and advice! And showing all the angles and step by step process on what you’re doing. Thank you so much fam 🙏🏾
@frankcarey147
Yes all the forum, mechanics hmmmmm....... I just bought a 2003 cbr600rr, with the idling problem. I put in carb cleaner, bike took a while to start ,but when it did it was almost perfect. I'm delighted. I might try the sea foam ,but i dont know if i can get it here. Now I have brake judder under hard braking. Read up about it but not one person said they solved it, but as usual loads of suggested solutions . I have actually stopped reading up on it ,it would do your head in. Well done to you, you are the only person who has solved this very common problem , including everyone on the internet.
@SpreadLove173 Жыл бұрын
LOL THANKS! Mines is running rough at idle too you saved me so much money idk what it could be someone told me idle screw too havent tried it yet
@devinsmith2049Сағат бұрын
Plug is fouling out change the plugs
@ollie5151
I’ve done this and my misfire has gone from cylinder 3 to cylinder 2. Any ideas?
@Zayy600
I have a 2003 cbr 600rr I did engine replace on it and now I’m getting high idle that slowly goes up to around 2000 rpm when I rev it the bike gets stuck a like 3000rpm and has hang idle first time ever doing this not sure what is wrong I checked slack on throttle but still happening Also sprayed it just like u did got some black off of throttle body going to buy new air filter see if that works . Would appreciate if u had any ideas
Пікірлер: 13
Update: symptoms came back to which I unscrewed the o2 sensor. All the carbon I blew out of the exhaust attached to the sensor making it pitch black. Bought mass airflow sensor cleaner to remove the carbon, then reinstalled. Seems to be working for now, will comment again if symptoms come back.
Rebuilding back my 2006 CBR600rr. Your videos for this bike have been amazing with your explanation and advice! And showing all the angles and step by step process on what you’re doing. Thank you so much fam 🙏🏾
Yes all the forum, mechanics hmmmmm....... I just bought a 2003 cbr600rr, with the idling problem. I put in carb cleaner, bike took a while to start ,but when it did it was almost perfect. I'm delighted. I might try the sea foam ,but i dont know if i can get it here. Now I have brake judder under hard braking. Read up about it but not one person said they solved it, but as usual loads of suggested solutions . I have actually stopped reading up on it ,it would do your head in. Well done to you, you are the only person who has solved this very common problem , including everyone on the internet.
LOL THANKS! Mines is running rough at idle too you saved me so much money idk what it could be someone told me idle screw too havent tried it yet
Plug is fouling out change the plugs
I’ve done this and my misfire has gone from cylinder 3 to cylinder 2. Any ideas?
I have a 2003 cbr 600rr I did engine replace on it and now I’m getting high idle that slowly goes up to around 2000 rpm when I rev it the bike gets stuck a like 3000rpm and has hang idle first time ever doing this not sure what is wrong I checked slack on throttle but still happening Also sprayed it just like u did got some black off of throttle body going to buy new air filter see if that works . Would appreciate if u had any ideas
The ending LOL
8:39