My R6 was dying below 160 degree (More in cold weather) and coming to a stop etc, in this I explain how I fixed this common issue with my R6.
Жүктеу.....
Пікірлер: 41
@shlukyy3 жыл бұрын
U saved my life bro🙏Thanks a lot.
@alangrant5278 Жыл бұрын
Nice job. Luckily my Yamaha xvs950 valves can be adjusted without needing shims and they’re fairly accessible. 50,000 kms - time to check ‘em again thanks dude 😊
@kimisaito54894 жыл бұрын
Very informative video mate, thank you for this. Just a quick question. I have the same 06 R6 just like yours, and have the same setup (decat with Y pipe and stock exhaust), do you think installing an exup eliminator after adjusting the valves would help keep it healthier?
@JC-er7je3 жыл бұрын
Mine does that too just after installing it, thought I would try different mapping. Did not ever had issues with it before and I just had valve adjustment
@joshharrison11693 жыл бұрын
what should i do if coil wont stay in on cylinder 1 ? my spark plug is brand new and i hear a click but when its idling it makes a hissing sound and the when i test ride it it pops back out ...i ordered a new coil stick but it has to be something else
@rafaellara41222 жыл бұрын
I did valve adjustment on my bike and is still dying on me on stop signs when it’s under 150 degrees. I understand I have to let it warm up but some times it takes 5 to 7 min to get to 150 degrees
@shaun70572 жыл бұрын
How many miles do you have on your bike mine has 5300 miles on it do you think I should adjust the lash this early on?
@blurl7185 Жыл бұрын
Mine sounds like its ticking pretty hard like in this video at 6 minutes. Is that a normal tick?
@user-bz5pm3vg1z
Thank u so much bro!!!
@sirmoney2762 Жыл бұрын
What website has free service manual
@JC-er7je3 жыл бұрын
Having the same issue after just installing full exhaust and power commander. I also added O2 sensor eliminator and exup eliminator. Had a valve adjustment recently before the installs and it’s having the same issues. I’m going to try different tune mapping, maybe it is running too lean.
@Djendnotes
Where'd u get ur shims from?
@TheWhole36
Mine won’t idle from start any idea
@blink4art4 жыл бұрын
Nice! I have an 07 too!
@shahrukhzaman10123 жыл бұрын
I've got same issue on a 2006 R6.
@dsmstealth922 жыл бұрын
i have an 03 R6 that has this throttle issue and struggles to start back up after warm. also have intermittent issue when taking off throttle hesitates then take off. i have noticed the bike is consuming an excessive amount of fuel as well. its only got 8700 miles on it. bike has sat in last persons garage for 8yrs.
@fafaderickrides24922 жыл бұрын
bro great day..may i know where is the idle screw adjustment located..the screw where you can increase and decrease the idle of our 2006 r6?
@h03smadd59 Жыл бұрын
I have a 04 r6 it don’t matter the temp it will die at stop signs and shut off completely when riding and not turn back on for a few minutes any tips?
@Nick-es4dx3 жыл бұрын
Hey man, i just bought a 06 r6 with 40k.
@xfuturegohanx_43244 жыл бұрын
I have a 2003 r6 but mine sometimes does this but my when I’m riding my check engine light pops up then it dies what’s wrong with it?
Пікірлер: 41
U saved my life bro🙏Thanks a lot.
Nice job. Luckily my Yamaha xvs950 valves can be adjusted without needing shims and they’re fairly accessible. 50,000 kms - time to check ‘em again thanks dude 😊
Very informative video mate, thank you for this. Just a quick question. I have the same 06 R6 just like yours, and have the same setup (decat with Y pipe and stock exhaust), do you think installing an exup eliminator after adjusting the valves would help keep it healthier?
Mine does that too just after installing it, thought I would try different mapping. Did not ever had issues with it before and I just had valve adjustment
what should i do if coil wont stay in on cylinder 1 ? my spark plug is brand new and i hear a click but when its idling it makes a hissing sound and the when i test ride it it pops back out ...i ordered a new coil stick but it has to be something else
I did valve adjustment on my bike and is still dying on me on stop signs when it’s under 150 degrees. I understand I have to let it warm up but some times it takes 5 to 7 min to get to 150 degrees
How many miles do you have on your bike mine has 5300 miles on it do you think I should adjust the lash this early on?
Mine sounds like its ticking pretty hard like in this video at 6 minutes. Is that a normal tick?
Thank u so much bro!!!
What website has free service manual
Having the same issue after just installing full exhaust and power commander. I also added O2 sensor eliminator and exup eliminator. Had a valve adjustment recently before the installs and it’s having the same issues. I’m going to try different tune mapping, maybe it is running too lean.
Where'd u get ur shims from?
Mine won’t idle from start any idea
Nice! I have an 07 too!
I've got same issue on a 2006 R6.
i have an 03 R6 that has this throttle issue and struggles to start back up after warm. also have intermittent issue when taking off throttle hesitates then take off. i have noticed the bike is consuming an excessive amount of fuel as well. its only got 8700 miles on it. bike has sat in last persons garage for 8yrs.
bro great day..may i know where is the idle screw adjustment located..the screw where you can increase and decrease the idle of our 2006 r6?
I have a 04 r6 it don’t matter the temp it will die at stop signs and shut off completely when riding and not turn back on for a few minutes any tips?
Hey man, i just bought a 06 r6 with 40k.
I have a 2003 r6 but mine sometimes does this but my when I’m riding my check engine light pops up then it dies what’s wrong with it?