"That miight be on fire" That's how you know he does this for a living, not even phased 😂

@Clover_knows_pets

3 жыл бұрын

@Clover J my name is clover!

Watching a grown man play with Kenetic sand with special gloves makes my day

@lunarumbreon3803

4 жыл бұрын

Lol

@ok-vk5by

4 жыл бұрын

Same here 🤷🏻‍♀️

@bee-un4fq

4 жыл бұрын

👏👏👏

@jotaromidoryia3981

4 жыл бұрын

I call this guy a watered down backyard scientist

@kathykumqwat

4 жыл бұрын

Same here

What would happen if you put kinetic sand into liquid nitrogen?

@kiraschii5629

3 жыл бұрын

lol I’d like to see that

@RichardEnglander

2 жыл бұрын

Get cold dude

Can we just agree that Nate is kinda adorable? Especially when he’s going “Squish squish squish squish”

@yourMom-ic4wr

4 жыл бұрын

Lol, I think Callie has already called dibs on him

@alolanexeggutor1010

4 жыл бұрын

Please tell me your a girl...

@Scalytt

4 жыл бұрын

@@alolanexeggutor1010 why?

@KevinD-nf8jv

4 жыл бұрын

CRUSH

@whopperslol

3 жыл бұрын

squish squish squish SQUISH

Can you guys try to freeze an egg with liquid nitrogen

@cathyb7189

5 жыл бұрын

I think that is very interesting. I'd love to see that.

@teetice

5 жыл бұрын

sounds cool

@kyleharper3507

4 жыл бұрын

Dede s

Moon sand was the OG, who remembers?

@kree4681

5 жыл бұрын

yeeeeeeeeeeeeep

@iheartjazminandsalvia6145

5 жыл бұрын

Fresh Nugget YESSS

@ehhvelo5112

5 жыл бұрын

oobleck was the og og

@milkshakehusky7155

5 жыл бұрын

Yea

@jordon-fx6ni

5 жыл бұрын

Hek ya man

4:15 for those who just wanna see it happen

@justastaythatwillnotbename2990

3 жыл бұрын

Thanks

Rip Steven Thompson so sad to hear the news thank you for everything ❤️🙏

@peaches1353

4 жыл бұрын

Peter Parker who

@seicento2tone

4 жыл бұрын

Peter Parker who?

@Jay-il5xj

4 жыл бұрын

Did he die or something??

@wannabeotaku8324

4 жыл бұрын

Who is Steven?

@SuperPITSteelers

4 жыл бұрын

You did a great job of sounding shallow and rude. Well done

Can you coat ice or dry ice with neverwet and if it works, let the ice melt to see if the never wet will be strong enough to hold in the water and for the dry ice see if it makes a bubble of gas.

@THESLlCK

5 жыл бұрын

Ice Wallow Come First interesting comment award goes to you.

@jaygroomes1357

5 жыл бұрын

Well. I love the idea. But I don’t think that would work as well as anyone would want it to. I would love it if it worked like that but I think it would just spill out over the never wet and make a mess

@dimactavicus

5 жыл бұрын

Ice Wallow Come neverwet isn't forcefield

@rttr5777

5 жыл бұрын

you know that never dry is a spray not a solid

@mistersourpatch7232

5 жыл бұрын

Ourboithedimz lol

Can you put raw meat in a glove then put it in liquid nitrogen to represent a hand and what it would do if your hand was in liquid nitrogen

@vishalworldoffire

5 жыл бұрын

meat is like peeling the skin off your hands and putting them in liquid nitrogen. They should instead use the foot of an animal with the fur shaved off.

@scarffoxandfriends9401

5 жыл бұрын

They did a pig heart already

@manfredschroder6789

5 жыл бұрын

Its the same like molten metal if u do it fast it will not harm your han

@skinsey85

5 жыл бұрын

@@vishalworldoffire The commenter said to put the meat in a glove to simulate a hand, not just meat.

@skinsey85

5 жыл бұрын

Except latex is not a simulation of skin and wouldn't react the same as skin. If they wanted to get an accurate reaction, they'd have to use a part from an animal. More specifically, a pig since they're anatomically similar to humans, including their flesh.

"Squish, Squish,Squish,Squish,Squish,Squish,Squish." 😂 lol

0:11 Rest In Peace King

What would happen if you dehydrated or melted silly putty?

@CSK513

4 жыл бұрын

They did that with slime I think

@timmytammy4297

4 жыл бұрын

Ari Morawski I read it as “slutty putty” haha

What would happen if you put vinegar in a vacuum chamber and then poured it into baking soda

Who’s here after Grants death. It’s so sad. R.I.P

@bigfloppa2089

4 жыл бұрын

That was last year chill

@bigfloppa2089

4 жыл бұрын

That was last year chill

@amlrls

4 жыл бұрын

Rip

@bigfloppa2089

4 жыл бұрын

Wdym?

@Liamhvet

4 жыл бұрын

Leah Abiye Love He just wants to see regular comments

So wholesome it doesn't even have a middle finger

@koreandogeater9292

3 жыл бұрын

That's the only finger that's important 🖕🖕🖕🖕🖕🖕🖕

@ken_fb3678

2 жыл бұрын

@@koreandogeater9292 lol

Hey Nate! I wanted to know if you or Grant could try to syringe liquid metal or liquid gallium into an egg shell. I've always wondered what would happen. Thank y'all so much!

@unknow3408

5 жыл бұрын

it will take the shape of egg but in some cases it can break the egg shell and leak out.

@emileamiller8789

5 жыл бұрын

@@unknow3408 Yeah. Thanks!

@wendybutler9881

5 жыл бұрын

emilea miller I really like that ida

@emileamiller8789

5 жыл бұрын

@@wendybutler9881 Thanks :D

@ThaBoyLucky333

5 жыл бұрын

That's a great idea🤗

Umm, it didn't spill because of a low edge, we saw you miss the mold. Fun vid though.

@henrimaitrejean4881

5 жыл бұрын

Lmao i also noticed that

@LunchBXcrue

5 жыл бұрын

He thought he could lie to us

@tortle-mations3710

5 жыл бұрын

Lol

@sleepykiwiz8986

5 жыл бұрын

Hey maybe u can not say that he’s wrong and be a little more nice what did he do to u like no need to call him out

@sleepykiwiz8986

5 жыл бұрын

Idk

It would been easier to use gallium Edit: nevermind they did

I want to see you make a plastic cup into a Barbie sized grill cheese

Try to genetically modify a plant

@videobeast286

5 жыл бұрын

hulkthegamer100 he should

@wolfkatsneekwaffle5374

5 жыл бұрын

Yesss

@PinkShades

5 жыл бұрын

Shock a seed a few times with high-voltage static electricity and then plant it. Maybe it'll mutate the DNA sequence enough to affect its growing instructions.

@unicornbanana4154

5 жыл бұрын

You can allready do it

@ZomgLolPants

5 жыл бұрын

you can splice plants together easily, there's guides on it online

Try mixing kinetic sand with super glue

I was playing with kinetic sand before I was watching this. And then I watched it while playing with kinetic sand It was just in my recommendations, btw.

Molding Grant reminded me of Star Wars if you know what part I’m talking about

@maggiezhao9056

3 жыл бұрын

Is it Han Solo in frozen carbonite

CAN YOU MELT A MAGNET?

@adriancarp3476

5 жыл бұрын

COMING, IN THE NEXT EPISODE OF TKOR

@crystalmayo9393

5 жыл бұрын

LINEAR MOTOR LAUNCH PRODUCTIONS duh

@jord-el4996

5 жыл бұрын

tis me, Crystal were you bullied as a child

@PazoraArts

5 жыл бұрын

Yeah you can melt a magnet, but it loses it's magnetic properties.

@berad26

5 жыл бұрын

The Backyard Scientist did basically exactly that in a video of his, go check it out

Can you see if molten salt conducts electricity like salt water

@vornamenachname6300

5 жыл бұрын

ITS_ME _AK Simple answer: yes. The Na+ and Cl- Ions are free to move.

@henrytimme9079

5 жыл бұрын

ITS_ME _AK do it

@its_me_ak3819

5 жыл бұрын

Anurag Bhatlawande Anurag were you Phy sir last year in Goa of gvm pace

@SC-RGX7

5 жыл бұрын

It will conduct because of the mobile Na+ and Cl- ions present in the molten sand

@vornamenachname6300

5 жыл бұрын

angrywolfjr read all other answers. It's not a metal

The question is, does it still work with molded brass having a melting point of 1083°C!

1:42 " I'm going to get some of this sand put it in the pan and press my hand into it " Hes a poet and he don't know it

Use baby powder when casting the logo so it wont stick

what happens if you mix gallium with another metal? will the gallium inside the metal melt and seperate at room temp or will it become enhanced by the other metal you mix it with???

@TrueBlueEG8

5 жыл бұрын

It turns aluminium into something as brittle as ice

@TrueBlueEG8

5 жыл бұрын

I never said it was weak...

@loudsiren8065

5 жыл бұрын

Interesting

@madeincda

5 жыл бұрын

The comments here are way more inspiring than other scientific videos. You feel like you walk away with something constructive to think about... It's refreshing is all I'm saying.

@DeluxeXIV

5 жыл бұрын

TrueBlueEG8 what is your definition of brittle?? 😂

Try mixing slime and kinetic sand and then making a sculpture with it

You guys do some of the coolest experiments!

Try to make glass with kinetic sand

@EpicHylje

5 жыл бұрын

TheBlackBeltCuber its almost impossible because kinetic sand is about 90% Polymer and about 10% sand so basically its just gonna burn to dust...

Put kinetic sand in a foundry

@Cynful

5 жыл бұрын

Yasss

@juanvilleda9259

5 жыл бұрын

TheBlackBeltCuber

@Postghost

5 жыл бұрын

It will just turn into that dry normal sand. Didn't you watch the video?

@gloooowria

5 жыл бұрын

wouldn't it set on fire!?!

@themessiah..

5 жыл бұрын

Postghost but he will put it in the foundry itself it'll probably turn to molten glass

You should try to vacuum chamber gallium

Can you find a way to make water explode when something interacts with it kinda like when a spark interacts with fire?

You should also try to freeze kinetic sand with dry ice or something

*RETRO INTRO*

You can try dry ice and gallium

"Using SANS to try to cast metal" i heard that. lol. dont tell me that it was sand. i know that already. i just heard sans.

How about you see how much magnet force to make a car move?

@thefallenraven746

5 жыл бұрын

Depends on which direction you are trying to move the car and wether or not its in neutral

@miningsquidsbadcontent8188

5 жыл бұрын

Mrbeast just did this

@yoyions8278

5 жыл бұрын

noice

@xstr1ke446

5 жыл бұрын

huh... i didnt see him do it, when did that video come out?

@spammyyt6879

5 жыл бұрын

that sounds like something mr beast would do

Can you do glass blowing? This was promised along time ago and I really want to see it.

You should do a video where you make a bunch of metal alloys and see which one is the strongest. (Edit: hi I have just found my comment after ages of not seeing it lol.)

I dare you to make a blob of magnetic slime and put on a bookbag

Open a carbonated drink in a vacuum chamber 👍🏽👍🏽👍🏽👍🏽👍🏽

@Landon_Chrud

5 жыл бұрын

How would u get the tab to move. And if u used a wire it would be hard to do it. So what's the point

@mr.burrito5591

5 жыл бұрын

Wouldn't opening it in a vacuum chamber and opening them outside of one have no affect? It's like opening a soda in a cardboard box. If he's not going to use the vacuum chamber then what's the point?

@donf5502

5 жыл бұрын

Just as easy to put a carnonated drink in the chamber already opened. That would be a cool shot though

@maniaclife6433

5 жыл бұрын

The can will expand and blast off....

Try using the styrofoam slicer to cut gallium

@OtherDalfite

5 жыл бұрын

ArcSoldier 117 and put gallium fumes in the air? Great idea!

@nathangamma3504

5 жыл бұрын

It will just melt

@chromepunkk

5 жыл бұрын

OtherDalfite lmao im very sure the styro slicer doesn't reach gallium's boiling point(over 4300°f)

@OtherDalfite

5 жыл бұрын

LilRowdy it probably doesnt. Im no expert on gallium but i know mercury fumes can be generated even if its just sitting in liquid form. Boiling point does not have to be reached for vapors to be released

"Smells interesting"

Try spraying fly ash or coal ash before pouring the molten metal. That gives a layer of temp withstanding material and smoothens the edges which touches the sand.

Can you melt a magnet and cast a new one? Will it work?

@jamesr.2017

5 жыл бұрын

No, melting magnets causes them to lose their magnetic force.

@marca6597

5 жыл бұрын

Jetty Rat Florida yes, it's metal so you can magnetize it again with another magnet

@migdonalds

5 жыл бұрын

SkiddyBud but it won't be permanent. Heat destroys permanent magnets' properties

@marca6597

5 жыл бұрын

cypekpl cat unless its for about hmmm... 2000 years. in the same position, undisturbed.

Great work. Watching since 1 million

@henryhb6302

5 жыл бұрын

Same!

@ProAsNooB

5 жыл бұрын

Will Bush me too!

@andysameh

5 жыл бұрын

The same..

@Epixul

5 жыл бұрын

me too!

@zagred4226

5 жыл бұрын

or is he talking about the subscribers 🤔HMMMmmmMmMmMmmMMm🤔

You should try Doing stuff with non Newtonian fluid (aka ooblek). It defies the laws of physics. I made it before. It was fun until it molded. Try doing things like putting it in a vacuum chamber or trying to cast metal things into it or combining it with metals to see the creations.

Melt like 3 gallons of Galiam metal, into a 5 gallon bucket then put your feet in it. Then let the Galiam dry and harden around your feet just for fun, Try to see if you could move your feet at all in the hardened Galiam. Then melt the Galiam again too free your feet

@jarodbelisle7876

5 жыл бұрын

Fat Sunny body temp would melt the gallium and never be able to harden around your feet

@1969ChevroletCamaro

5 жыл бұрын

@@jarodbelisle7876 That's what I was also thinking

6:15 I started laughing my face off XD 😂

@yan-yan6972

5 жыл бұрын

Lol

@teatime2090

5 жыл бұрын

i had subtitles on and it made it funnier haha

@roamspida4951

5 жыл бұрын

Squish squish squish squish squish

@zombiekel09

4 жыл бұрын

That’s sad you don’t have a face now

Can you please do a video about kinetic sand in metal foundry? Will it turn to normal sand?!

@knot4040

5 жыл бұрын

it'll burn

@nathangamma3504

5 жыл бұрын

It looked like is burned and turned into normal sand

@wingsofthunder170

5 жыл бұрын

it will burn up as seen in the vid :P

Hey, so not sure if anyone else caught onto this, but looking at the spots were the sand was embedded into the metal for the third one, that was the area in which you were pouring the metal. So What I think happened was that the liquid metal was making gentle pushes as it was landing inside the mold and that is why sand is in the metal when it cooled down.

How do different glues react to kinetic sand , sand , molten metal, and normal metal?

“Colored flame” flame thrower🔥

@winter4265

5 жыл бұрын

They already did it?

@harrison4781

5 жыл бұрын

LuckyProRiders yess

@hellyeahs6828

5 жыл бұрын

LuckyProRiders yes

@jericodawsonmarcos7529

5 жыл бұрын

LuckyProRiders just use the correct kind of salt

Try if you can Crush Kinetic Sand after bathing Liquid Nitrogen..😁

@niaschimnoski882

5 жыл бұрын

👍

@michaelmorrison8156

5 жыл бұрын

Bad Boy 👍🙌

@nabriss

5 жыл бұрын

Bad Boy 👍

Can you guys try to melt aluminum in the foundry then make it into a perfect shiny sphere

@valenciagarrett9405

2 жыл бұрын

charyfreezingthekinetiesand

What about getting a bunch of LEGO blocks and melting them to turn in to a giant LEGO block

I noticed, often, that when you cast with aluminum you get a rounding off on the top. My question would be is it possible to relieve the surface tension on top to flatten that out when casting?

@sumorabbit2160

2 жыл бұрын

Not with open casting, but you would if you use a casting flask with a riser and sprue.

Like the new intro style 👑

@deepakmenon7733

5 жыл бұрын

It's kind of old

You should try to polish up poo from different animals until they are as shiny as possible and see which one shines the best

Buy a ham solo action figure and cast him in gallium to make Han Solo in Carbonite

Dat sand got ALOTTA DAMAGE needs FLEXX TAPE !!

Can you try casting metal in play-Doh

@mrwhoannon300

5 жыл бұрын

Spartan Crusader playdo would probably melt

@iambored5

5 жыл бұрын

its spelled Play-Doh you bone heads

@spartancrusader7686

5 жыл бұрын

M C lol true true. I’ll edit my comment lol

@arthirumale6602

5 жыл бұрын

it will melt and burn as soon as liquid aluminium will touch it....... It might work with gallium...

could you make magnetic gallium?

What happens when you cool a mixture of liquid metal and slime

Sent this suggestion via mail about two years ago, when you had trouble with the radiation symbol cog.

@tilengasparic6765

5 жыл бұрын

feel old yet?

Yeah, this is pretty satisfying

@liability6407

5 жыл бұрын

FIRST TO REPLY OMG

@ambientaddict7613

5 жыл бұрын

You're not everywhere enough. Step up your game.

@jonathanjuwainat5535

5 жыл бұрын

Update your KZread and go away you are not welcome here

@xavierhung5313

5 жыл бұрын

every vid I watch!

@7hejoker224

5 жыл бұрын

Can you use kinetic sand to mold with steel

Can you melt brass or plastic, then mix it with a molten magnet, and see what it does.

I wonder that sand can you make it as hard as like cement or so giving it more durability, more hard state vs it's sandy stick together/pull apart ways but a strong hard to break brink or so.

Can you do a Room Tour?

That 90s intro is sick guys. Make more like that stuff!

@mohammedmokhtar

5 жыл бұрын

Wow, thanks for the heart KOR!

@metalmangaming3614

5 жыл бұрын

Meh the intro is OKAY

@Theevsss

5 жыл бұрын

I agree with you the intro is so cool

Hey... What if you take a egg and cool it in liquid nitrogen and then heat it up again? Will it keep it's shape or will it bust

please try melting iron and puitting a magnet next to it . if thats too dangerous, you could try melting iron powder

Try cooking a hot dog over molten aluminum and then cover it in foil and drop it in nitrogen

@ian1078

5 жыл бұрын

thats a mouth full...

@dipankarghosh8495

5 жыл бұрын

Hamilham.

@louii6003

5 жыл бұрын

Did that

@axolotlife677

5 жыл бұрын

There is a line of random and that has crossed that line 5 years ago

You should melt down old jewelry and make king of random jewelry

@deanrobitaille9992

5 жыл бұрын

That would be cool

Going for the ol reverse shocker with that hand my man

Try sandblasting the casted pieces after the casting is done.. it’ll get rid of the stuck on sand nicely

next episode: casting sand into kinetic metal.

Now this may look and smell like brown sugar but don't taste it it taste like sand

@mambodog5322

5 жыл бұрын

This implies that you tasted it

Can you make kinetic sand and if so a lot and make a life size sand castle with it

You can do something similar to that with styrofoam, but instead of making the shape in a hole, you shape the styrofoam to the shape of the metal you want.

What happens when you mix permafrost and antifreeze

@he1882

5 жыл бұрын

Lil Spooder DEEZ NUTZ. DEEZ NUTSZ IS WHAT HAPPENS

@RealHankShill

5 жыл бұрын

Permafrost is just frozen land. So, you would wind up with a chemical spill on frozen ground.

@bbs5918

5 жыл бұрын

Hamza Raza does are some deformed nuts you got

@elijahcormier5239

5 жыл бұрын

OLD MEME. OLD MEMES ARE DEAD!

@yungjays5533

5 жыл бұрын

Big boom

Try adding gallium to the ninja balls to see if it would melt and become liquid in your hand

Trying melting down plastic bottles and cast with plastic

Try melting candles and mixing them together to make a different type of smell and candle!!

Make a slime with super glue

@physicist7459

5 жыл бұрын

You cannot, its gonna be solid

@peacelover7074

5 жыл бұрын

It has an very solid bonding

What would happen if you put Kenetic Sand in liquid Nitrogen?

@fleecemaster

5 жыл бұрын

it gets cold

@alexlowrie03

5 жыл бұрын

Fleecemaster 😂

@skyeelexus

5 жыл бұрын

Legokyleman-Roblox hebhrhhwghhb

@josuedavidmontoyachavarria9968

5 жыл бұрын

Fleecemaster A poco se pone frío?

You should try mixing a metal with a low melting point with a metal with a high melting point and try casting some thing and see how long it takes for it to solidify

Two ideas 1. Do the same thing but instead of metal use gallium. 2. Do the same thing but instead of kinetic sand use putty/slime.

1:46 hand reveal 😱

@peterpham1887

5 жыл бұрын

Frosted Buns lol

@adogwholikesdogs3079

5 жыл бұрын

Frosted Buns OMG

@Stasis1524

5 жыл бұрын

Glimmer Wolf ...what

@dawnmartin5073

5 жыл бұрын

Frosted Buns a

@GriffinShepardBasch

5 жыл бұрын

Frosted Buns read about section *new* eat elf butt

Are you able to harden Aluminum like you're able to harden steel once you get it to critical temperature and then quench it in oil? I am 14, but I love studying metallurgy and Im reasonably curious because I don't have the tools to experiment myself.

@THESLlCK

5 жыл бұрын

Nocturnally To answer your question, no. If you compress it, it can become just as strong as steel.

@NoctN7

5 жыл бұрын

I figured it could work harden, I just didn't know if the crystalline structure could become martensite or not, thanks man! :D

That hand certainly won't be flipping anyone off anytime soon

you should make a video about using slime in the foundry what would happen?

Can you build an igloo with kinetic sand and not have it collapse? I'm sure if the density holds together in bricks you could make a multi-coloured igloo. (even if you have to do it in miniature)

Could you use the thing you did with baking soda and super glue to cast something? Or make a mold that could withstand the heat of molten metal(or chocolate)?

You should use a Barbie and put it in kinetic sand and then use some type of metal and put it in there

Can you find a way to make a super bouncy ball. One that will bounce more than 25ft in the air.