Is it just me or are magnets really attractive

@jovincebrillantes1042

5 жыл бұрын

GET OUT!!!!!!!!!!!!!!!

@Clasxc

5 жыл бұрын

Loooool

@constancecrawford9467

5 жыл бұрын

Nice one

@kilrrclown

5 жыл бұрын

The puns are killing me

@j.pocket

5 жыл бұрын

Polarity counts for something, I thinks.

It's because melting them or heating them to a point destroys the molecular alignment that causes magnetism to occur. Side note: Igneous rocks actually cool down with their molecules aligned with the earth's magnetic field at that time, allowing us to very accurately track Earth's magnetic fluctuations across millions of years. A magnetic snapshot of the past.

@caddyguy5369

2 жыл бұрын

This is how we know about the reversal of the poles. :-)

@skok58

Жыл бұрын

Why don't the magnets realign with earth's current magnetic field?

@osamabinladen824

Жыл бұрын

Piper Landry My mind has been blown. Wow.

So what happens if you put a magnets in liquid nitrogen and super cool them do they get stronger

@Larc3069

4 жыл бұрын

Bro he's dead

@shreyashshambharkar3973

4 жыл бұрын

It gets stronger

@itzus8222

4 жыл бұрын

No

@nikolaiorr8383

4 жыл бұрын

Look up a mobius strip

@itzus8222

4 жыл бұрын

Nikolai Orr How does that have anything to do with magnets??

Well, I just found out a way to defeat Magneto. He teamed up with Pyro for a reason.

@GetRocStar

5 жыл бұрын

Glad I'm not the only one that thought defeating about Magneto lol

@josuefairy

5 жыл бұрын

Irventor also Dr. Doom

@gregfox3740

4 жыл бұрын

Irventor lol

@AJOP1

3 жыл бұрын

LOL

This meaning we can defeat Magneto by sending Human Torch.

@RtistiqSkubie

5 жыл бұрын

Saiful Anwar Hamdan you have no idea what Magneto's power really does? Do you?

@Dr.Fluffles

5 жыл бұрын

He means the supervillain, not the generator...

@Abigart69

5 жыл бұрын

This is my favourite comment I can die happy now

@hitandrepair

5 жыл бұрын

OneEye Gentleman this comment made my day

@Lord_Xonaz

5 жыл бұрын

OneEye Gentleman like 1500 f° Edite: the metal drom the comics has magic in it so it near impossable to melt it down

You should read about the "Curie-Temperature" of a magnet. Neodymium magnets have a curie-temp of about 350 degree C. That means at this temperature the material loses it's magnetism completely and permanently.

@Throneos

5 жыл бұрын

Semi permanently You still can re-magnetize them

@ElighneArkaine

5 жыл бұрын

:O how?

@Tweadon

5 жыл бұрын

The issue is that each grain is oriented in a different direction, meaning that the net total of all grains cancel out to no direction pull. You need to polarize the material to orient them all in one direction again.

@TheGrumpyReefFish

5 жыл бұрын

They also get stronger when they are cooled

@CarlosSanchez-en6mr

5 жыл бұрын

I was wondering how he doesn’t know that heat removes magnetism I got thought that in 3rd grade

well it is possible to reactivate the magnets by reheating the magnets to round about 2/3 of the melting temperature and while let them slowy cooling down, expose them to a strong electromagnetic field. this will give the randomly ordered magnetic molecules the chance to re-aligne in to the into the proper magnetic order and maintaining that position.

4th grade lesson taught to me in 1964: Heat demagnetizes anything, including magnets.

@TheReligiousAtheists

5 жыл бұрын

Tell that to SiC

@monteceitomoocher

4 жыл бұрын

Yup, heating and beating, learned it in secondary school sixties.

I heard magnets actually get stronger when you freeze them. I was wondering if in your next video you could do the opposite with the magnets. Maybe dip them in liquid nitrogen.

@lll_Life_lll

5 жыл бұрын

Zeldas Champion electro magnets do but don't think these do

@maxwelljennings4178

5 жыл бұрын

i was going to ask the same thing!

@gyrgrls

5 жыл бұрын

You can't freeze a magnet, because it is already in a solid state.

@zackzackary9260

5 жыл бұрын

John Bond by freeze I would presume he meant cool

@prakharmittal5888

5 жыл бұрын

John Bond he means cooling it you nub

Could you try making a railgun that fires molotov cocktails?

@ionite5943

5 жыл бұрын

nooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo u pinned him

@abelcheng2073

5 жыл бұрын

I swear I see you everywhere.

@sidzilpe9391

5 жыл бұрын

Do you follow SSUNDEE?

@aaronmackay6123

5 жыл бұрын

Interesting. I suggest flaming gas filled tennis balls from a potato cannon.

@NixMaster3k

5 жыл бұрын

WHO ARE YOU? AND WHY ARE YOU ON EVERY VIDEO COMMENT SECTION I SEE?

Great video! I was looking for melting magnetite videos and came across this one. Answered a lot of questions. Very well done!

You have to keep a strong magnetic field next to the magnet while it cools from red hot or it'll become randomized and be very weak magnetically or not at all. That's how they make them. They heat them to glowing and then put them next to a powerful electro magnet while they cool to align the fields.

So basically to defeat Magneto you just have to raise the heat

@babyrob9419

5 жыл бұрын

He controls metal not magnets no

@edinfific2576

5 жыл бұрын

Yeah, but if the metal is hot, he can't control it.

@roryharland5435

5 жыл бұрын

He controls magnetic and electromagnetic fields not metal.

@edinfific2576

5 жыл бұрын

Rory, so what's your point? He controls magnetic fields and through them magnetic materials. The point here is that his "power" is useless when any magnetic materials (materials reacting to or being influenced by magnetic fields) are above a certain temperature because they lose all of their magnetic properties and his magnetic fields don't affect them at all.

@roryharland5435

5 жыл бұрын

Edin Fifić he has the power electromagnetism meaning he can control most if not all electrical currents meaning his power to control electric wouldn’t be affected by heat. Plus it wasn’t your comment that a replied to.

Growing up I use to make my mom nervous playing with a wood burner in the house... and at Grants house he has a homemade arc blaster in the basement haha

@the_shadow_hog

5 жыл бұрын

He made it himself from pieces of an old microwave

@kc-ip2vc

5 жыл бұрын

@@the_shadow_hog and fire brick

I really needed to watch someone melt magnets. My life is complete.

Learned how ceramic acts in a fire as a kid when me and a friend threw away some old ceramic dishes in the burn pit. We took shelter in his truck until they stopped popping.

So Human Torch would win against Magneto?

@Mr-Ad-196

5 жыл бұрын

Hmmm there a chance........unless magneto slam him with iron stick at high speed

@TheLizardWizard_the2nd

5 жыл бұрын

There is difference between magnets and electromagnets. Magneto's power based on electric magnetism.

@LeapsofFaith1234

5 жыл бұрын

I'm going to move this coin with my mind on the count of 3. 1...2... *throws coin* ...3...

@mbrusyda9437

5 жыл бұрын

Huh? You mean what Magneto manipulates is actually electric current and the magnetism is only secondary effect? Just heat the metals, whatever magnet it is lose effect then

what if you froze gummy worms in liquid nitrogen, crushed them into powder, and put the powder in a cotton candy machine. will it melt, or become cotton candy

@StoneCoolds

5 жыл бұрын

CableGG Slimes 🤔 💭

@everythingallin4905

5 жыл бұрын

Sounds delicious. U sir, just invented a candy idea.

@eronpsy

5 жыл бұрын

This is the real question

@waterhungry2279

5 жыл бұрын

I must see this happen

So this is why when the Sun throws a solar flare the Earths magnetic field also gets weakened. Same mechanics?

@MuhammedhilmigulluBlogspot

3 жыл бұрын

Dave Rios yes, because solar flare means radiation and radyation means heat means weakened magnetic field.

@k4rim799

3 жыл бұрын

@@MuhammedhilmigulluBlogspot That does not make sense considering that earth is heated up from inside and it does not affect it

why does he wear thin rubber gloves when handling hot materials?

@michaely.9149

5 жыл бұрын

So he doesn't get his dish wash soft hands dirty.

@seofra8252

5 жыл бұрын

The gloves may look thin and crappy. But those gloves are actually quite awesome. I've even seen chefs use them to prevent cuts.

@francisdeighan6040

5 жыл бұрын

No idea.

@justinroski4994

5 жыл бұрын

@@seofra8252 They're just gloves... You can get those exact gloves at harbor freight.

@pashkracken4054

5 жыл бұрын

@@seofra8252 we chefs DO NOT use little black gloves to prevent cuts..we do have gloves for this purpose, but not the ones you see here. They're much thicker and not made of rubber.

Two suggestions: Find a way to mix your glow-in-the-dark liquids with a bubble solution, or see if the dish soap enhancement to increase it's glow also works to blow bubbles. Glowing bubbles are always fun. Also, we've seen that extreme heat ruins a magnet -- what about extreme cold? Do magnets work after being submerged in liquid nitrogen? What about steel that's been submerged in liquid nitrogen -- does it still attract magnets just as well as it would normally?

Is wearing the plastic gloves the best idea??

@goreobsessed2308

5 жыл бұрын

yes

@avianasaunders6019

5 жыл бұрын

When working with hot stuff no

@drnefarioreal

5 жыл бұрын

yez

@godofgamers3884

5 жыл бұрын

Better than nothing

@miuzik8op908

5 жыл бұрын

gofofgamers - How about when the latex melts to your skin?

2:24 ‘that din’t last long’ That what she said

@thecringemaster5533

3 жыл бұрын

I don’t get it

"Oh Jeeze" LOL that was pretty funny!

Magnets always lose their magnicity when heated to a certain temperature

@K0ester

5 жыл бұрын

The curie point, a temperature at which a material loses all permanent magnetic ability.

@K0ester

5 жыл бұрын

SynthFrost he probably knew that, but well a video is a video, and it seems a lot of viewers don’t know that

@KaitharVideo

5 жыл бұрын

Yeah, I was like "duh, Curie point" ... I'm curious if the magnet that demagnetised after sitting on the cooling magnet did so because there was enough heat left. As for the ceramic ferrite magnet, the result is kind of obvious when you think about the name: it's a ceramic containing a lot of metal particles.

@jasonsummit1885

5 жыл бұрын

Magnicity?😂😂

It's because if an object is hot the atoms and elementary parts are moving very fast and this causes the elementary magnets to lose their order and their magnetic attraction

@marilyn69manson

5 жыл бұрын

thank you

@darrenkastl8160

5 жыл бұрын

Florian Sattler Ya, me too!!

@nathanspringer216

5 жыл бұрын

@@darrenkastl8160 .

Lol you explained your plan 3 times in a row before doing the experiment. Felt like an infomercial repeating their phone number. 🤣

The dipoles of the magnets will have high kinetic energy thus increasing the entropy within the system making it less magnetic.

does magnet gets stronger as we decrease the temperature? (use liquid nitrogen)

@ree-dv5ir

5 жыл бұрын

Shady i dont think thats how it works

@Fra321

5 жыл бұрын

Answer: no, the magnetic field is trapped in the material and heating it up releases that material. Cooling it down only prevents it from escaping, but you can't create a more powerfull one.

@divine308

5 жыл бұрын

Freezing the magnet will create quantum trapping in the magneting feild

@tylerhickling6674

5 жыл бұрын

Cooling the magnet makes the particles move more sliwly allowing for better alignment and results in a stronger magnetic feild. All you kids saying no should do your research before commenting. Fra32 cough cough

@Noah2019

5 жыл бұрын

tyler hickling exactly. These kids understand nothing

How about using an electromagnet (coil) to magnetise them again

@SketchyScribe

5 жыл бұрын

Le Olaf I was thinking the same thing. That's how most magnets are made, they use an electromagnet to align the field to a uniform direction, so I don't see why that wouldn't work here lol

@rasalghul1904

5 жыл бұрын

Le Olaf that would be awesome to See

@martindinner3621

5 жыл бұрын

Try this with the degaussed neodymium magnets!

@Joe-xr2xl

5 жыл бұрын

Build a electromagnet using the transformers from the microwaves and 10 gauge wire. Wrap it around the arc furnace, now you have a magnet making machine.

@elrufino7066

5 жыл бұрын

ItsAKaime so you could make your own shaped magnets right?

This reminds me of Charlie day from it’s always sunny saying his favorite hobby is “magnets”

I think you might want to try that idea you had at the end to set up a version where the B field isn't disturbed by heating the magnet you're trying to use to set the standard magnetic field. I'd love to see you accomplish it without an electromagnet.

What happen if you melt kinetic sand? Is it make kinetic glass? lol

@theall9007

5 жыл бұрын

Anthony The hmmmmm ?😂

@theall9007

5 жыл бұрын

Anthony The interesting

@pmolikn2the804

5 жыл бұрын

It's a very nice experiment

@randomchannel1475

5 жыл бұрын

Lol

@kairos-049

5 жыл бұрын

Do you not know what kinetic sand is?

Place a coil of wire around the furnace. Allow some electricity to flow through the wire, creating a magnetic field while the steel is melting & cooling... Then what happens?

@JohnLeePettimoreIII

5 жыл бұрын

That's called an "Induction Furnace".

@secretagent5658

5 жыл бұрын

Glenn Gutshall Not a bad idea, but it won't work.

@xjgbgaming3480

5 жыл бұрын

Isn't that a solenoid?

@doc0core

5 жыл бұрын

The current must be DC, not AC, and it has to be reasonably strong. Cooling the alloy from above the Curie temperature to below the Curie temperature with presence of an external magnetic field (from the coil) would magnetize the alloy.

@Xeridanus

5 жыл бұрын

An induction furnace uses AC to generate a rapidly fluctuating field that cause the metal inside to heat up. What Glenn is talking about uses DC.

Its because when a magnet reaches a certain temperature called a curie point its attraction no longer flows outward, but inward. Essentially it attracts to itself because the heat loosens up the atoms in the magnet and then those attractive atoms attach to eachother. This also causes the center of he magnet to retain a slight magnetism

I always wondered what those pieces of metal that stuck to other pieces of metal were called, glad I saw this video.

Lots of misinformation about Nd magnets here. Neodymium magnets are not "mostly neodymium"; they're mostly iron. The approximate formula is Nd2Fe14B, so Nd only makes up ~12% of the alloy. The fact that it is an alloy would only serve to decrease the melting point, not increase it. Thus they should melt a bit below iron melting temperature. It's possible the cylinder magnet had a hard time melting because of low contact area between the curved surface and the electrodes. Also, I understand you do things solely for entertainment, but you really should have at least mentioned the concept of the Curie temperature. It clearly explains what happened to the magnets. A minimal amount of research would really help improve your videos.

@peoplezk1

5 жыл бұрын

Alloys do not always decrease melting temperature compared to pure substances. For an example which is simpler than thinking of metals: Mixing alcohol with water increases the boiling temp compared to alcohol but decreases compared to water. This is something you can experiment. Another example, but more complicated, is mixing indium and gallium which are both solid at room temperature, but the simple rubbing together creates a mixture that is liquid. So your statement was wrong. Proper statement: Due to the fact that neodymium (high melting temp) is being mixed with iron (lower melting temp) and assuming that the mixture is ideal (or aprox ideal) in its behavior, then we can say that the melting temperature will be between the two. The melting point can increase, compared to the pure substances, if the mixture diverges from ideal behavior in a way that makes it energetically favorable to be a solid. For example, if the mixture leads to massively increased interactions between their potential wells, for example very close bonding, then we will get a mixture that has a higher melting point then either of the pure substances. Also, these guys make videos for a certain crowd of people that don't really care about the science behind it, and that's fine. Not everyone has to know everything all the time.

@rofflestomp684

5 жыл бұрын

He was using temperatures well in excess of the melting points of the materials. Nd Curie temp is about 350deg. Nd melting point is about 1100deg. The composite magnets are not melted when created for a reason. Nd melting point is several hundred degrees below iron btw. Iron is around 1800 deg. So the ovens he used obviously worked, but I would love to see an inductor as they use in vacuum deposition.

@nathanegbert977

5 жыл бұрын

Peoplezk1 A solution of alcohol and water will boil at the temperature of alcohol until the alcohol is gone. Boiling and melting are governed by different laws of physics. What Mrhomescientist said is true, an alloy will always have a lower melting point. Stainless steel is a great example as it has a melting temp lower than both the iron and chromium it contains.

@teddyzyt8920

5 жыл бұрын

mrhomescientist please be my chemistry and biology teacher 😂😂😂

@pablolimon2765

5 жыл бұрын

Not true... It will boil until you get a solution that boils at a slightly lower temperature than alcohol. Search for azeotropic mixtures. By distillation you can only separate water from alcohol (specifically ethanol) to approx 95.6%. The azeotropic mixture of water an ethanol boils at about 78.2degC while pure ethanol boils at 78.5degC. The opposite is true and some azeotropic mixtures have higher boiling points than the components in the mixture... Or something like that ;) I have no experience on metallurgy though...

Every year you should invite a random fan to do an experiment with you

@lemonshire1

5 жыл бұрын

Junkrat 82 more like every month

@soultaker432

5 жыл бұрын

More like every week

I work in an iron ore mine where its reservation of (FE) it’s magnetized by nature . You could stick a coin in the dirt , and the metal sticks to it . Amazing video 👍👍👍

It's funny.... Heating the magnets causes a loss of magnetism, yet super heating iron, such as at the earths core, creates magnetism.

@a.r.ripley2582

5 жыл бұрын

The earth's magnetism is electromagnetic and electromagnets don't have a curie point so therefore the temperature doesn't have anything to do with it

@thetwojohns6236

5 жыл бұрын

@@a.r.ripley2582 I did not know that, thank you.

@croman718

5 жыл бұрын

I guess you can say it's *IRONic*

@DjJtown

5 жыл бұрын

It's not only Iron in the Earth's core but other metals; specifically Nickle; at different temps and direction of rotation, that induce the electromagnetic field.

@croman718

5 жыл бұрын

@DjJtown Thats true, but I saw an oppertunity to make a pun and just took that oppertunity jfbehgvbrhfjhffjhf.

*Magneto should watch this*

@greencrewmate4051

5 жыл бұрын

We should burn magneto to make him lose his power

@BlueGreen-cv9ev

5 жыл бұрын

Or Polaris

@courtenayblair2279

5 жыл бұрын

His enemies should watch this

Scientifically magnets should lose their attractive forces (Magnetism) after it's heated, so it won't attract anymore

@overknight5278

5 жыл бұрын

kr4zyy yeah.. didnt everyone hear this? I thought it was common knowledge, to get rid of a magnetism in a metal heat it And to add it electrify it (if im not mistaken)

@HeavyDave997

5 жыл бұрын

OverKnight 52 you can also run a magnet against metal to magnetise it, like those small keyrings with a magnet so you can magnetise a screwdriver

@IamNemoN01

5 жыл бұрын

kr4zyy Scientifically, the earth’s molten metal core should not be capable of producing or maintaining magnetism; but thankfully MAGICAL SCIENTIFIC FAIRY FART DUST permits it to retain its magnetism beyond the Curie Point. . . And if you believe that I have a bridge for sale in Brooklyn. . . So much for lience, I mean science.

@emknight84

5 жыл бұрын

Try spinning a huge amount of molten metal through a magnetic field and see what happens....science!

@w.t.h.2040

5 жыл бұрын

IamNemoN01 Probably not a molten core indeed. I think more like duality becomes trinity.

I've seen an experiment when a magnet is heated on an electric stove and it loses the magnetic attraction even when it has cooled. After hitting it with a hammer the magnetivity returns

You know those gloves... can melt and stick to your skin?

@kidinthekelp5570

5 жыл бұрын

Or even melt into skin

@isaacc3307

5 жыл бұрын

Or melt under skin

@luisp.3788

5 жыл бұрын

Or ｔ　ｒ　ａ　ｎ　ｓ　ｃ　ｅ　ｎ　ｄ　ｔ　ｈ　ｅ　ｓ　ｋ　ｉ　ｎ

@DjJtown

5 жыл бұрын

Oh, will you please demonstrate that for us? I don't believe you.

@System-ru5yt

4 жыл бұрын

@@DjJtown same i want to see

Can you try making a big electric arc furnace?

7:16 idk that look like a frog 😂🐸🐸 I Love ur videooo 💕🙌

Magnets and metals attracted to them lose such properties beyond the CURIE TEMPERATURE being exceeded. I think this is around 250 deg C. Also we will all miss this guy.

Ceramic magnet shattered due to uneven heating, like you would get with glass. Heat it slowly.

imagine melting monster magnets

@wafflemaker4922

5 жыл бұрын

john johnson I cant see ur comment lol

Can you try MAKE a magnet? (A permanent magnet, not the temporary/electro magnets)

@evanothahamidjojo2835

5 жыл бұрын

Milo Legends from what i know u cant

@RijuChatterjee

5 жыл бұрын

Um, what, you think all commercially available permanent magnets are like, dug out from mines or something? Of course you can manufacture a magnet. That's what letting hot ferromagnetic materials cool in a strong electromagnetic field (as suggested at the end of the video) would do.

@mango251

5 жыл бұрын

evan otha you can

@TheGreatSerafim

5 жыл бұрын

Man, its izi. The magnetic field is created by the arrangement of the particles, if you get a hot metal and force a huge magnetic field (neodymium/electromagnet) while its stills red, and let it get colder, once cold the particles would still be organized in that way, creating a magnetic field

Thanks for this video....I'm saving it to my data for educational purpose

8:18 wow that magnet is like my cat when it touches water lol

a cool experiment you guys should try is making lichtenberg figures in glass or plexiglass I have no idea how you would go about making that but if u could I wonder what amounts of electricity can you get from the smaller sparks that can go on for 20 minutes or more

@allaboutsamantha5833

5 жыл бұрын

I had no idea what this even was but I looked it up and this is so amazing I wish I could try it at home but it would be cool to see the different experiments they could do with this

@TheLizardWizard_the2nd

5 жыл бұрын

That's not the same as if it's on wood, trust me. Both glass and plexiglass much less capable of absorbing liquids, so you won't be able to carve figures, cuz, liquid conductor would just vaporize before it can heat up properly.

@slippykeaton4393

5 жыл бұрын

no look it up lol its like trapped lightning its way cooler trust me

What happens when you put glow stick juice in liquid nitrogen?

@kairos-049

5 жыл бұрын

LilFrap it would freeze quickly, stopping the rxn?

As soon as you heat a magnet lose the magnetism. You need to put the cooled magnet into a high magnetic field to codify the new magnetic field into the magnet. You can do that when the magnet is cold, or when the magnet is cooling down.

When you heat a magnet, give it shocks (like hammering it) or set two magnets together on their opposite sides, it’ll lose it’s magnetism

Nearly 10 million

Try cold welding different metals in your vacuum chamber

6:35 motorcycling is one of the three awsome actions you do in that pose 🤘

0:09 seconds When you complete assassins creed 😂

Those poor tongs

Try to molt steel(or any metal that can be attracted by magnets) while it levitates via a powerful electro magnet.

@TheLizardWizard_the2nd

5 жыл бұрын

When it comes to electromagnets it does not make much of a difference if metal heated up or not.

@egerasim4886

5 жыл бұрын

Donatien Alphonse François de Sade but still it will be cool

I’ve been looking for this video for years

Trivia: He pronounced the word magnet for over 60 times in the whole video

Can u guys make a lighter that can switch between colors of the fire??

@Savanyy

5 жыл бұрын

Just Because

@MrMinecraftfreek

5 жыл бұрын

its not that simple

@yoandry007

5 жыл бұрын

GrittZ that's why I want them to try

Try melting cured silicone and see if you can recast it.

its so mindblowing to me that theres only a limited amount of magnetism in magnets. it seems like it should be an inherent property.

Some Blacksmiths actually use a magnet to test their temper because the temp where they lose magnetism is the perfect temp for tempering.

Hey i hav a question.... We know that earth's magnetic field is due to flow of ions in the core. But if heating ruins magnetic effects then what's the cause of earth's magnetic field??

@thedillybot

5 жыл бұрын

Completely spitballing but I would assume the rotation of the inner and the (relatively) stationary outer act (somewhat) like a generator and a current is induced in all the metal within the crust which generates the magnetic field normal to the axis of rotation of the core. I'm gonna check the wiki to see if I was even close.

@thedillybot

5 жыл бұрын

My guess was pretty close.

@KaranSingh-uj4jh

5 жыл бұрын

Yeah i too searched it..this thing works due to the reverse dynamo thing...you were pretty close dude🤘

@marilyn69manson

5 жыл бұрын

haha i was just thinking about this when i watched it... i believe however that it may be due to the solid iron in the crust... the liquid metal moving around inside of the solid iron makes a magnetic field much like how a electric motor creates a electric field, just having the mass if iron rotating inside of the iron shell.... but i serously was wondering about this for like 20 minutes after watching this vid dude

@songsforasmr9223

5 жыл бұрын

Gravity works different than magnetic field.

On around 2:23 I starting laughing so hard in America there is another tornado

@jenniferstrickland7390

5 жыл бұрын

Wtf?

@lma9468

5 жыл бұрын

?

@daemon2663

5 жыл бұрын

There's another tornado? Huh?

@birddaddydetta

5 жыл бұрын

"Well, that didn't last long" Lmao

Magnetism goes away when steel is hot enough, it's actually a teqnique to check the temperature when blacksmithing and knifenaking

Great video! But doesn't everyone know that magnetic domains in the magnet get all jumbled up when it's heated? I mean when we learned that in school, they trusted 3rd graders to use bunsen burners to demagnetize a magnet we made from a magnet...

So if glowing red steel isn't magnetic, does it still conduct electricity, and if so could you use a steel rod with a glowing red tip to make an electromagnet?

@KaitouKaiju

5 жыл бұрын

dustin mccorkle yes it will still collect electricity and yes you can use it to make an electromagnet Although such an electromagnet will be pretty terrible because it's hotter which makes it more likely to fail

Try to cast melted rock to a knife! ( the rock from the making lava video)

Whenever something squirts, you say: "that's exciting" like when the steel sparked(squirted) pr the time when a battery squirted, and you said the same thing.

@System-ru5yt

4 жыл бұрын

i wonder what he would say if his pp squirted

You guys should try freezing magnets and steel with liquid nitrogen and do similar tests.

@leoliu6469

3 жыл бұрын

agreed

@__coconut__

Жыл бұрын

@@leoliu6469 agreed

Sand cast with molten salt please

Ahh....Only 1 MIL remaining.......your subscriber from 4 Mil or so.....Miss those old DIY days

@Kostaki05

5 жыл бұрын

Nachiket Patil same

As magnets are heated, they rotate and vibrate faster, and hence lose their atomic alignment as they start to point in different directions. This is how magnets lose their magnetism.

Okay, well here's an idea: take a strip of thin magnetized metal and twist it into a mobius strip, then cut it down the middle and see if it will make a wint-o-green lifesaver glow in the dark while in a centrifuge!

When I turn steel without coolant then the steel and the HSS-Tools are becoming frick'n magnetic til it's getting warmer.

Try to mix melted magnets with other melted metals and see what the product is and try to cast something

I wasn t sure bit I suspected this result. The magnets what ever kind they are, are ionized and when heated those ions are allowed to move so the whole positive and negative sides are canceling them out like the natural metal they are derived from

That's so crazy that you built that! And use two brazing rods to melt it. Which is what they're used for really.

I love your shirt

Isn't it all just to do with the ions direction?

Who just has a 2000 degree furnace in their backyard. I mean no big deal right.😂

A cool experiment would be to melt down the steel (or magnet) and the apply an electromagnet field to see if the the cooling material will have a magnetic field after it cools due to the influence of the field while it cools

So coooool! Science, baby 🤟😎

“So we’re going to melt down this then this and then both.” (5 seconds later) “So we’re going to heat up this then this then both” (5 seconds again) “Alright let’s melt this,”

They lose magnetism because the electrons no longer align when you melt it. If you create an electromagnet and put it next to the melted metal, the magnet will magnetise the metal and turn it into a new magnet.

One of the ways to permanently destroy a magnite is to melt it

What would happen if u put a magnetic powder in Proto-putty? You should try it!!

Make a magnetic gauntlet!!! it might be useful to some experiments

@Sypaka

5 жыл бұрын

**100 years later** a dude with a gauntlet collects rare gems to wipe out the universe.

@edmarkhentsvlog1104

5 жыл бұрын

DdDDf

@wishboy2156

5 жыл бұрын

K.D. wonder if it can hold an infinity stone...

you should melt the magnets down and form them into lego men and recharge them with a powerful electromagnet

Magnets loose all thier magnetic properties in excessive heat. Some magnets retains there properties a little but most magnets can't.

Can you please make colored molotov cocktails?

@aljon5947

5 жыл бұрын

cool idea.

@logantheskater9109

5 жыл бұрын

Dan ppop

@krishpatel3201

5 жыл бұрын

Kya kar raha hai kya tu bhi na kabhi kabhi bahu ka hai kya hua tha na tu naina more on WordPress meet of the day of the show was going on in the show was a nahi hai to bata dena ki main kya karu chu ke liye kuch bhi nahi

@beanieteamie7435

5 жыл бұрын

Next video is diy homemade colored hand nukes

@tailehuynhphat9570

5 жыл бұрын

Knut Storoygard im pretty sure you mean colored antimatter warheads right?

8:41 "Isn't it composition of the alloy" or have i learnt wrong?

The molecules are no longer aligned after heating the magnet hence the term "normalizing" after annealing the metal

Can you make a custom mixture, so when I go out and bout for walkabout,that I can get a Sheila to magical slide over when the one, catches my single eye ball? lol!!