CAR BODY REPAIR | BIG DENT FIXED WITH PAINTLESS DENT REMOVAL | PDR UK
Автокөліктер мен көлік құралдары
Massive Dent Repair on a MGZS EV (Electric Vehicle)
In this video I show you how I repaired this big dent using only PDR and GPR methods.
This is the correct way to repair minor dents on Electric Vehicles because there’s no welding involved such as welding tags and pins to pull the damage out…. Instead we use hot glue and rods to pull and push the damage out without affecting any of the electrical components or removing the paint…..
Also in this video I answer your comments specifically regarding the tools that I use, I’ve labelled each one during the video, Thank you for your comments and I hope this helps!
Note:
I'm not endorsed or paid to promote any of these tools in this video (23.12.22)
Join this channel to get access to perks:
/ @dentremover01
----------------------------------------------
I hope you can take away some information from this if your a new dent technician or really interested in the job.
If your a potential customer looking for an accountable technician then I hope you are happy with how we operate, you can see our many repairs and this will give you the peace of mind when booking your repair in. We repair many customers vehicles up and down the country, we are in Beverley and we set aside all the time in the world and look after you if you travel to us.
Paintless Dent Removal or PDR is a method of removing minor dings and dents from the vehicle bodywork without the need for filler and paintwork. This is a highly skilled process in which the dent(s) is massaged from the rear of the panel or sometimes from the front using glue pulling methods.
------ Chapters------
00:00 The dent
00:28 Explaining the damage
02:36 Your comments answered
02:50 The first pull with GPR
04:56 Inspect the damage
06:27 Using Knockdowns on the crowns
07:27 Analysis of the repair so far
08:03 Glue pulling the bulk
08:26 Using PDR tools
10:43 Return to glue pulling!
12:29 Fine tuning / Sharp tools
13:31 Thanks for watching
13:49 Finished results!
14:25 End screen
---------------
Filmed by Alastair Robertson… Thanks mate!
Repaired & Edited by Martin Sadler
Please SHARE this video and give a LIKE & SUBSCRIBE to keep in touch with all the latest videos…
For more information on what we are about
www.dent-remover.co.uk
All Soundtracks by Epidemic Sounds
Under Licence
--------------------------------------------
See you soon
Martin
#pdr #collision #youtubevideo #gluepullrepairuk #myrepair #EVdentrepair #DentRemoverBeverley #GPR #camautopro #vehiclerefinishing #autobodyrepair #PaintlessDentRemoval #youtubedentvideo #autocollisionrepair #EastSide #ThoseDentGuys #DentRepair #cardetailer #automobile #repairShop #DentRepairUk #PdrVideos #MobileDentTechnician #imiCertified #dentVid #pdrTech #pdrTechnician #HullDents #DentsHull #IMI #HullDent #CityOfCulture2017 #MartinSadler #kecoUK
Пікірлер: 119
Looked like that one was fighting back a bit Martin, but you kept your cool and got the better of it! Cracking job as always! 😉
@dentremover01
Жыл бұрын
Thanks Jake! Yeah just a bit! You could tell by the tone of my voice and my moaning lol!!!
@dingking7577
Жыл бұрын
Jake, GREAT TO SEE U ON HERE! Hope all is well! Happy Christmas to you and yours!
@1st_track_dents
Жыл бұрын
@@dingking7577 I'm good thanks, Merry Christmas to you and yours too! 👍
Hi Martin, Wonderful work, you did look a bit fed up on that one..! Love watching your channel, i find it very calming to watch, and learn at the same time. I have a classic car collection of approx twenty vehicles, i am tempted to buy some tools and have a go at a few car park dings....
@dentremover01
3 ай бұрын
Hi W Jones Thank you and yes that MG was horrible to repair!! Such a chewy- plastic feel to the metal but I think I got it! I’m very happy you enjoy the channel! And learn also. Regards trying this, I would definitely try a small course first. You may damage your car and it end up costing you a lot more in re working or ruining a classic and wishing you hadn’t tried it.
Hey.... you are the first dent guy I've seen wearing nitrile gloves!!! Good life saving choice!
@dentremover01
Жыл бұрын
Thanks Jim! I try to wear them as much as I can, because the acetone/isopropyl messes my hands up and goes all horrible ! Thanks for watching Martin
Excellent video and well explained as always in terms of tools and approach. A real game of patience. Watching totally banjaxed panels get fixed, oddly, is very therapeutic to watch. Very happy customer there. Happy Christmas.
@dentremover01
Жыл бұрын
Thank You Nigel for your great comment. It was a brain teaser and took a while so I needed patience! End results are great though and satisfaction Merry Christmas Martin
After watching this again Martin I have to say this is moved from PDR to PCR (PAINTLESS COLLISION REPAIR). AGAIN BEAUTIFUL JOB!
@dentremover01
Жыл бұрын
Hey Tommy! Thank you! I never thought of that! Could be a new part of the industry like GPR! PCR you heard it here first! 🙌🏼
Excellent work Martin. This looked like a very technical dent. As always, you got it done. Thank you for sharing these repairs. 👍
@dentremover01
Жыл бұрын
Thank you Kevin your comment is much appreciated Il keep sharing as much as I can 🙌🏼
Love your videos, Martin Thanks for sharing
@dentremover01
Жыл бұрын
Thank you Salah very kind of you 🙏
This guy is amazing !
That was a tough one Martin. Great job and moaning is a normal thing in jobs like this. Sometimes I have to take a break for longer to come back to repair so thumbs up for that job! Excellent!
@dentremover01
Жыл бұрын
Hi Karol thanks for your comment, I don’t get many jobs where I’m struggling like that one! It just wouldn’t repair! I got there in the end and my customer was very happy so that’s the main thing. I agree sometimes it’s best to walk away and come back to a job Thanks again Martin
@karolalbin
Жыл бұрын
Satisfaction when customer is happy giving something special ☺️
@dentremover01
Жыл бұрын
Yes that’s the best part!
Great job as always!
@dentremover01
Жыл бұрын
Thank you Etienne happy new year 🙌🏼
Martin your the man
@dentremover01
Ай бұрын
Thank you so much for your support Bill!
@billseay6399
Ай бұрын
@@dentremover01 you bet!
Absolutely amazing work
@dentremover01
Жыл бұрын
Thank you Mark
What magnificent work and attention to detail, many thanks for the video.
@dentremover01
8 ай бұрын
Thank you very much
Круто...Завидую мастерству...Martin you are very cool!!!
@dentremover01
Жыл бұрын
Thank you Daviti very kind of you. 🙌🏼
fantastic job very impressive
@dentremover01
Жыл бұрын
Thank you Naveed 🙌🏼
Once again Martin my friend you nailed it
@dentremover01
Жыл бұрын
Thanks Bobby! See you in a month 🍺
@DentZero123
Жыл бұрын
@@dentremover01 Absolutely brother
You sir..... Are the dogs nuts, awesome work! 👌
@dentremover01
Жыл бұрын
Wow thank you Angelo I really appreciate your kind words Merry Christmas and happy new year 🥳
Nasty damage is right, MERRY CHRISTMAS MY FRIEND! See you and G next month!
@dentremover01
Жыл бұрын
Merry Christmas to you, Jamie and family and really looking forward to catching up with you guys ! Il get first round!
Awesome sauce, it takes a lot of patience. I have used glue pulling on aluminum panels works great. Pulled it out enough to do body work and paint.
@dentremover01
Жыл бұрын
Hi James thanks for your comment… yes Glue pulling or GPR as it’s more commonly known now is ideal for Ali, because the welding pin pullers are difficult to use (my experience 15 yrs ago) and glue is a lot faster and better for the repair…. You never know you may repair it to an acceptable standard with practice and not have to re paint Have a great Christmas
Great repair Martin 👏🏽
@dentremover01
5 ай бұрын
Hey Kirk! Thanks! I hated that repair!
Красавчик, ничего не скажешь! 🤝
@dentremover01
Жыл бұрын
🤐
excellent explain for techniques and tools, 👏👏👏
@dentremover01
Жыл бұрын
Thank you 🙌🏼
This should have been a door skin replacement! Job well done!!!👍🏻
@dentremover01
Жыл бұрын
Yup I agree! I hated repairing this!! Skins are not so popular these days, I fitted a lot in my time and to get that seal and paint on the edges can be hard. Better a new door or a repair and paint….. but I saved it “just” and my customer was super happy ! Thanks for your kind words
Excellent👌
@dentremover01
Жыл бұрын
Thank you Salvador happy new year 🙌🏼
Valued, friend!
@dentremover01
Жыл бұрын
Thank you Juan and merry Christmas
Thank you showing us how to complete these type of repairs. I just acquired an Airstream travel trailer that need many dents repaired hail and accident damage. Tools are coming in a couple of days and we will see how it goes.
@dentremover01
5 ай бұрын
I love those airstreams! Good luck I hope you sorted it out
@robertmassmann228
5 ай бұрын
I have been able to remove most of the bigger dents out, but still need the refine my techniques to remove the damage completely.
@robertcampbell5485
2 ай бұрын
Wave and ripple city I bet
Definitely looked a job from hell but excellent result. Hope you and your family have a Merry Christmas and Happy New year 👍👍
@dentremover01
Жыл бұрын
Thanks Corey! Yea glad to have finished that one! Have a great Christmas 🙌🏼
Great work. The lift which brings the vehicle to eye level must help a great deal in doing these lower door dents. Merry Christmas to you and yours from 🇨🇦
@dentremover01
Жыл бұрын
Hi Frank yes 100% that’s the main reason I got it, my knees where getting bad while I was a mobile repairer and I knew I had to get a place out of the weather elements and a ramp! Merry Christmas 🎅
@frankpavan7865
Жыл бұрын
@@dentremover01 yes. I understand. Thanks.
Another great video Martin,what toils would you recommend for starting pdr and where would you recommend to buy them
คุณเก่งมากครับ ผมอยากเก่งเหมือนคุณแต่อุปกรณ์ของผมไม่มีเหมือนของคุณ
@dentremover01
Жыл бұрын
Hi Sanyachanal I hope I have the correct language (Hindi) आपकी टिप्पणी के लिए धन्यवाद। बढ़िया मरम्मत करने में सक्षम होने के लिए आपको सभी नवीनतम उपकरणों की आवश्यकता नहीं है। मुझे आशा है कि आप जो करते हैं उसका आनंद लेंगे और उसमें लगे रहेंगे। मुझे यह भी आशा है कि आपको भविष्य में और अधिक उपकरण मिल सकेंगे
I just watched your video. That's a World class job ! I would say 'perfect'. AND if I say say its perfect...you know its right. Good Boy...now, get your hair cut. Merry Christmas Son .
@dentremover01
Жыл бұрын
Thank you very much 🙌🏼
Great job as always. I bought a glue kit about a year ago and still haven’t used it as yet lol. Recently got a different car with a few dents here and there which I’m going to tackle when the weather is a bit warmer. 😬🙏
@dentremover01
Жыл бұрын
Thank you! Make sure you take your time with the glue system. If your not sure then stop and call a local tech. It would be a good idea to chat with a local one first anyway just so you don’t make it worse Good luck Martin
@selectarasnik7047
Жыл бұрын
@@dentremover01 thx mate for the advice. will do. 🙏
Great video and repair Martin! Horrible dent and not a forgiving paint colour, great work mate
@dentremover01
Жыл бұрын
Thanks Graham!!
Nice one Martin - there's another repair where a lateral pulling rig would be dead handy & speed things up a lot for you.
@dentremover01
Жыл бұрын
Hi James thanks for your comment, I’ve seen the technique but not had the chance to try it out I’ve always managed
@jamesward5721
Жыл бұрын
@@dentremover01 I'd no idea what it was, but once you get shown it in action, it's one of them "Ohh Yeah!" moments - just makes loads of sense. :-)
Well done Martin Those panels are really soft
@dentremover01
Жыл бұрын
100%! Those panels and Hyundais are not nice to fix!
@darrenhughes4207
Жыл бұрын
Good job Martin it’s Darren from the keco open
@dentremover01
Жыл бұрын
Hey Darren! Glad you enjoyed the repair….. see you at the next open day?
Отличный результат!
@dentremover01
Жыл бұрын
благодарю вас! хорошо в итоге получилось! счастливого Рождества !
@larsy9269
Жыл бұрын
@@dentremover01 Спасибо! И Вас с Рождеством! И хорошего нового года!
good shape good job 👍👍👍👍👍 🇲🇽🇲🇽🇺🇲🇺🇲👏👏👏👏👏👍👍👍
Good 🦸♂️
@dentremover01
Жыл бұрын
Thank you and merry Christmas
nice job how long did it take
Hi Martin if when you use bridge pulling keep half way then blending the crown down easy and quick. pls dont mind that is my experience.
@dentremover01
Жыл бұрын
Hi Bill, yes your right and I do do the technique you mention on most repairs, I just struggled with this repair Thanks for your comment and happy new year!
Well done , you have some patience for that one 👍🏻 top job 👌🏻 which slider you using , cheers Andy
@dentremover01
Жыл бұрын
Thanks Andy, it’s called a Pulldog slide hammer and it’s a great 🙌🏼 tool I’ve had it for years
@1973Aj
Жыл бұрын
@@dentremover01 Thank you 😊
@1973Aj
Жыл бұрын
@@dentremover01 Can’t find that one no one seems to sell it anywhere, have you tried the griffin one ? Cheers
Hi Martin, excellent as always! Just a question: on repainted cars (no filler) is possible doing PDR? Merry Christmas!
@dentremover01
Жыл бұрын
Hi Massimo thanks! Yes sure you can, you just have to go careful and even repaired (filler) panels can be saved but again it’s a very fine line and a steady process Happy christmas mate
@massimo6770
Жыл бұрын
@@dentremover01 👍👍👍
Good luck...
@dentremover01
Жыл бұрын
Thanks Masoud 🙏
Do you think lateral tension on that body line would have helped???
@dentremover01
8 ай бұрын
Possibly. But I didn’t have the equipment to use at the time
Nice work. Curious how the paint will last long term in this area, if adhesion has been compromised and this becomes first place for future rust to occur?
@dentremover01
Жыл бұрын
Hi Doug thanks for your comment. If the paint isn’t compromised then there’s no chance of it going rusty in the future. The paint is fully adhered to the damaged panel and won’t change. If the paint comes away or is compromised then a repaint is the best option to re seal the area with fresh paint. Does this answer your question? Thanks Martin
@dougpeirce726
Жыл бұрын
@@dentremover01 I don't know that I agree. The paint has been stretched, stressed because of the dent forming and then metal manipulation to get back to it's initial shape. There has to be some microstructure break down in the paint or loosening of the bound to the substrate. It would be interesting how a salt spray test would perform.
@dentremover01
Жыл бұрын
Hi Doug. I’m 25 years I have never heard of any PDR repair rust after a PDR repair If the paint does stretch then it would crack or micro crack and then maybe your correct- but all the repairs I’ve carried out the paint has been in 100% condition and therefor not compromised. Great indepth comment thank you it’s appreciated
How can I repair a dent which is in the bit that runs under the doors?
@dentremover01
10 ай бұрын
If it’s the Sill then it may not be repairable with PDR I’d always recommend speaking with a PDR tech first
@balljennings
10 ай бұрын
@@dentremover01 I think its called a rocker panel. Like where a side skirt would be but this car is too basic for that stuff. But I can see that its all one panel which extends up past the fuel flap and onto the roof. So replacing that panel probably wouldn't be worth it. I think it's metal so a panel beater could probably repair it.
Well done, that one was definitely time consuming. Too bad those holes were so tiny for that lower trim piece aswell
@dentremover01
Жыл бұрын
Hi Brian thanks for your comment. Yes they could have come in handy but I reckon I’d have messed the holes up. I don’t want another like this that’s for sure!! All the best
where are you front 👍👍👍👍👍👍🇺🇲🇺🇲🇲🇽🇲🇽
@dentremover01
Жыл бұрын
Hi Pepe! We’re in the Uk 🇬🇧
@illiasvtillias5153
Жыл бұрын
😀q
@MorindaSilly-rn9dl
Жыл бұрын
Hey is good work am like it
@MorindaSilly-rn9dl
Жыл бұрын
Hey is good work am like it
Denting job vacancies available?
@dentremover01
11 ай бұрын
Thanks for asking! But not at the moment at Dent Remover hq
Fske
@dentremover01
9 ай бұрын
Thanks for your comment, happy to say it’s not, and you spelt Fake wrong!