I propose a bcw vs mcm vs skid factory $500 track car challenge. who's in?

@daveman3026

5 жыл бұрын

My crap car challenge.

@SgtSayWhat

5 жыл бұрын

but then who would build MCMs car?

@captainzoll3303

5 жыл бұрын

@@SgtSayWhat them, of course. that's what would make it funny, marty and moog having no idea what to do, and woody forcing alan to do things the non-proper way.

@ashas7730

5 жыл бұрын

With a $1000 mods allowance

@ChristopherBell

5 жыл бұрын

@@captainzoll3303 I think it's a little obnoxious to say Marty and Moog would have no idea what to do.

Put a suitcase handle on the top of the engine to make it easier to take in and out

Straight from the unicorn circuit to Benny's 👌🏻👌🏻

@hammatime94

5 жыл бұрын

Straight from skid factory to bennys

Straight talking, no drama or rubbish, knowledgeable mechanics. Great stuff, Benny, glad you've got your own channel

That clutch is so cute

I love how secondhand coil overs from Japan still look in great condition and near new. Keep up the great work Benny 🤙🏻

Love the factory clutch alignment special tool.

beats were dope tool toss was on fleek BCW custom oil? = mind blown

@alt7488

5 жыл бұрын

it looks like penrite with a bcw sticker on it

@Akshun82

5 жыл бұрын

Need me some of that BCW oil!

@darrylvanrooy

5 жыл бұрын

I reckon somebody’s dropping hints for an oil sponsor.

Shout out to the RS Liberty Club forum

Of the many car-tuber channels, yours has the best music. Quality minimal beats and sounds and very little cheese.

You know you're watching a young man work when you see him kneeling on a concrete floor without destroying his knees.

@LobbyDaLobster

5 жыл бұрын

no "Crick-Crack' as he stands up afterwards...

Good work man, loving the vids 👌

Quality content perfect length loving it Benny!!

Love your channel Benny!!!! Keep up the mad work

Awesome work Benny. Love the way you work!

Love these vids fellas 👍🏻

Good work Benny! I'm thoroughly enjoying these videos.

Great to see ya benny

love your work and the show Ben!

Nice one benny can't wait for the next one

Cool Benny, keep it coming!

Absolutely loving these vids! Always awesome to see a professional working on cars, keep em coming Benny!

Time for a well earned hot beverage... Tea ;)

@simonbattams123

5 жыл бұрын

@@Fuaarrkk I like tea it's very nice 😁 milk and two sugar's 👍

@ravenc703

5 жыл бұрын

@@Fuaarrkk didn't like the coffee/tea pun??

@tannerpowell6525

4 жыл бұрын

Lemon Squash or death

And i only just bought a cappuccino! ill be rewatching these videos over and over for service and repair tips!

Thank you for sharing with us sir!.

Very cool mate! Coming together nicely.

Such a cool little car! Keep up the good work, lovin the channel 👌🏻

Cool stuff. Great to see a series on one of these excellent little cars.

Love the video Benny. Well done to who ever is helping you.

Love the "Tray-o-Bolts"

Watching this with my morning coffee. Nice work STIGY.

Haven’t seen any videos or anything yet but just ran into this gem and instantly hit subscribe, I love you Benny, stay chill

Always fun to watch Austrailians fixing cars!

Job well done bro. 👍🏼👍🏼👍🏼

Sub count is climbing Benny. Well done. 👍

good call on the forums, benny. for every guy that's willing to film this stuff (and do it well), there are 1000 who are willing to take photos and write about it. still a great source of info for most specific applications. there's also nothing like a website full of people who love your car. and on that note, I love this little car!

@alexbennett997

5 жыл бұрын

Keep the forums alive. An Infinite source of knowledge

@procrastinator1842

5 жыл бұрын

Facebook car groups suck.

Beautiful car, and beautiful shop. Thanks for showing us all of this.

Siiiick dude!

This channel makes you appreciate Benny more. Such a wizard with vehicles. He helped me out once with my first subaru thanks Benny

Benny, I love your accent .Your Channel ROCKS Much love from the states👍THANX MATE 😆 what a cute little car .. lol.

Aww yiss I fully forgot this channel started....binge starting now

Seen you al and woody at motorex seeing the Cresta and the Bedford was great

This episode is such an improvement! In terms of editing, shot angles, lighting and everything in between! You could tell it has that Benny "let's just get in to it" vibe

what a neat little car

Looking forward to the next episode

at first I didn't like benny but now he is out on his own I have subscribed nice guy good channel

Nice one boys

Must be a joy to wrench on those teeny tiny parts 😎👌

Its nice to see some basic mechanical work being done.

Yum, more content!!

wicked video bro! epic tips about the hoses, so keen for the reveal. im guessing you will cover it in the next video but if not i was wondering what the biggest offest wheels you can run on them without poke and scrub, cheers!

nice!

So tiny but so freakin cool!

B, B, B, B, BENNY AND THE JETS

Oh yeh, go the Aussie Chevelle, and big ups to Corty in the CTYWOK build

That's the fucking cutest gearbox I've ever seen. It's like they got a normal RWD gearbox and hit 30% on the photocopier.

I always marvel at the fact that the largest guys seem to have a love for the smallest cars. :)

I love how tiny and “cute” that little three cylinder is!

Had one of these when they were new - a red one just the same! Loved the car - would have liked to keep it, but insurance was stupid to run it as a second car when I bought another car..... Weren't many in the Uk to begin with and nearly all have rusted away now. :-( Love the vid!

Over 43,000 subs in a month ain’t too shabby either 😎

Man I loved the music!

@MTLA1984

5 жыл бұрын

Earthcore style, so flowy :)

I have always wanted a cappuccino.

The F6A lives, I've enjoyed the cappuccino engine re - build because we get so little K - car content in Australia Arigatou gozaimasu

3 cylinders always sound tough!

Pro tip for the home gamer. Always use just water to run up the engine after installing a new head gasket. Coolant will track and your new head gasket will be ruined. Especially with multilayer steel gaskets.

The tapping sound is common on these engines. Most likely the IAC valve. Nice work on the Cappuccino! I'm still missing mine ...

@BennysCustomWorks

5 жыл бұрын

Leon van de Pest was air in the lifters , they bled up and were silent after a 5 minute drive

Racing Spec Damper is a top brand man! Good work! Lol

@BennysCustomWorks

5 жыл бұрын

Nathaniel Mathies they are Buddyclub’s . Pretty reputable Japanese brand .

@1one3_Racing

5 жыл бұрын

Yeah man. I knew you wouldn't buy shit. Japanese love things with English on them, even though they don't know what it means. I guess it's the same as Australians getting "chicken chow mien" tattoos

Happy

Gotta love a drivetrain you can just manhandle around! Cranes and winches are a pain!

hey benny/gian who does your editing and music selection? it is pretty spot on for this style of video. loving seeing more of these edutainment style vids.

@TheDuckie78

5 жыл бұрын

dude gian, if that's all you on the editing and filming you've got your shit down. big ups to gian

I have duck taped a few sockets together to make a clutch alignment tool for a few cars in a pinch. Definitely not picking up those boxes like that LOL

Spotto another cappuccino on the mezzanine.

@rm6330

5 жыл бұрын

@13:59

I want one of these.

ratchet straps are great tools in a lot of places:D replacing springs on struts, just use a couple of ratchet straps, a lot nicer to the paint on the new springs too, rather than the clampy thingies..

Woop woop

Good job Benny! I love the Cappuccino, but I don't think I fit, barely did in the Miata...

@OllamhDrab

5 жыл бұрын

It's good to be smaller, sometimes. :) (Sometimes I wonder if manufacturers suffer from too much influence by Really Tall Car Reviewers. "All back seats are useless," "Well, maybe not if you don't have the seat all the way back? Can I get an idea about that?' :)

Can't get enough of Benny and his beard. lol

That thing just looks like a model car engine... too cool.

Is that another Cappucino shell (silver) on the shelf in the background?

@BennysCustomWorks

5 жыл бұрын

Nixxomatic that’s the cap this engine originally came from, it had a pretty bad hit on the rh rear quarter panel

Fuckin great video Benny!

oh&s are coming for you mate without your boots on

Support Benny by watching the ad's all the way through! - more - more - MORE!!!

One day I want to own Cappuccino as well, they seem to be pretty rare outside of Japan though? Tried to google to find out if there's any here in Finland, found out that there's maybe 2 of them here in total.

Music has a very nostalgic feel to it.

Ayyyee fuck yeah Benny

Working on mine now and just wish it was back in aus, the UKs weather isnt nice to old little nuggets

You mentioned parts for the cappo. I need cams and rockers plus lifters. Im not opposed to complete head either. Bret

WOOHOO

assembly lube on the cams and priming with the ignition disabled will help next time

Cute driveshaft.

One good thing for taking out seals is using a paint can opener

Used to see heaps of these in Wellington New Zealand. One of the mayoral candidates and long term councillor way way back in the day used to drive around in a red one. Edit: I said "used to", she still has it! we're talking around 20 years! Check out the news story caught parking on a pedestrian crossing..

@DiscoFang

5 жыл бұрын

Check it out in the local news site... www.stuff.co.nz/motoring/news/77023614/null

didnt get a chance to see the new wheels!

I once learned a method of removing main seals by gently screwing a wood screw in the old seal and then just pulling it out with a pliers. Sounds crazy but worked well with the smaller seals.

@johnjosephson9277

5 жыл бұрын

I've done that too, pretty sure I read about it in an aftermarket workshop manual...

Front damper on that looks a bit better than the Alto one, that looks like it actually has rubber!

Just came here from Alan and woodys channel

最高！！！！！！

I wish we had these little cars in the states. We don't have any cool rwd/awd small cars.

@BennysCustomWorks

5 жыл бұрын

Hanky Bannist8r there’s heaps of cappuccino’s being imported into the US

Benny is like a Wikipedia of mechanical engineering.

made that look easy! lol