Cannon Restoration + Test firing
Restoration of an antique salute cannon from around 1860’s. I will restore this beautiful treasure and repair all the necessary defects and test shoot it with 3 salute cannon shells.
ABOUT THE SALUTE CANNON
This is an antique salute cannon bought at an auction here in Sweden. The cannon is from Hällefors Bruk in Sweden and this cannon is dated to be around the mid 19th century. The cannon is made of cast iron and is in two parts, the cannon stand and the cannon barrel. The two parts weigh around 14 kilos.
Hällefors Bruk was founded in 1652 and is well known all over the world for making solid cannons used for defense and battle. They are also known for making iron pipes, iron stoves, cast iron pans and a lot of other iron stuff.
THE RESTORATION PROCESS
I started by inspecting the salute cannon and directly took it to sandblasting. I sandblasted the cannon barrel and the stand and used regular sandblasting sand as my media with high (6.5 bar) air pressure.
After sandblasting I removed a lot of very fragile metal from the barrel using my new flexible shaft machine. I also removed a lot of excess iron from the casting process to improve the overall look of the cannon.
There were some marks on the cannon barrel that could indicate that the cannon once was deactivated and later activated again. But it was sold to me as a functioning salute cannon.
I did face a little problem with the cannon barrel though. After so many years standing outside in the Swedish harsh weather, the last 20 millimeters of the cannon bore was totally blocked by rust. That means it was unable to fire salute shots in this condition and had to be repaired.
So I drilled all the rust out of the bore with a very long cobalt drill and the supporting tool that I have made for this occasion to support the long drill and to ensure that the bore would be drilled 100% right so it could function correctly again.
There were a few holes in some very thin cast iron at the bottom of the barrel plus the bottom was hollow. So welding it was not an option. I decided to fill the whole bottom of the barrel with tin. And this repair turned out really well. After this I thoroughly cleaned the bore and I soaked the barrel in motor oil for a few days to ensure that there was oil in every little corner of the cannon. I painted the barrel black using heat and linseed oil.
The cannon stand was in really solid cast iron and painted and therefore in OK condition after all these years out in the weather. I did some minor grinding and refreshed the H for Hällefors, which was engraved in the metal a long time ago. After that I powder coated the stand in green army color and painted the bottom black.
I also cleaned the small cannonballs which came with the cannon. NOTE: they are only for decorative purposes since they don’t fit into the cannon bore.
I filled some old fireworks in the cannon and did 3 blank salute shots (all shot were blanks and I was using maximum 8 gram black powder) in a very safe and uninhabited area environment. So do not test this in your garage, please! Even 8 grams of black powder can be very powerful and cause serious injury and fire if used wrong.
I really think this restoration video turned out to be very good. Please subscribe if you want to see more cool upcoming projects 🙂 And DON’T FORGET TO SEE my F-4 PHANTOM II Aircraft Restoration - • F-4 PHANTOM II Aircraf... &list=UULFsCCifMby57qV_UmrYGladQ
And don't forget to subscribe to my channel!
Thanks for watching my channel. See you soon.
Best wishes and stay safe ❤ Martin.
Пікірлер: 2 800
In this video I restore a beautiful Salute Cannon from Sweden - Please let me know what you think! ALSO SEE my Mechanical Toy Restoration 👉kzread.info/dash/bejne/aIGYutakpqjelrw.html 👈Best wishes and stay safe ❤ Martin
@_Mother_Of_A_yotube-Developer
Жыл бұрын
Заливать сталь СВИНОЦОМ, а после писать название «реставрация» 🤦♂️, да ты "ГЕНИЙ!"
@AdamAdam97531
Жыл бұрын
Приветствую ведущего канала . Эта одна из самых неудачных твоих работ по реставрации , ты в начале ролика показываешь недостатки которые необходимо исправить но в деле оставляешь всё как есть не доводя свою реставрацию до совершенства как делал ты это ранее . Тебе за эту работу я ставлю неудовлетворительно .
@welshirbny13
Жыл бұрын
You have high experience and workmanship, as long as I wish to do the same as you, but I do not have much patience. I hope that you will visit Egypt one day and host you with me.
@animalsaver2127
Жыл бұрын
Omg u look like the guy from breaking bad
@fundicionmarcelserio
Жыл бұрын
Las marcas que tiene la base que conservaste también son defectos en el proceso de moldeo en la fundición , al igual que la parte que rellenaste con metal ! Saludos buen trabajo !
The love and care you put into restoring and preserving these old treasures - "preserving the beautiful signs of old age", as you said it - brings me joy. Thank you!
@AwesomeRestorations
Жыл бұрын
Thank you for watching 😉👍
@djnone8137
6 ай бұрын
I told my wife she should preserve the beautiful signs of old age like AR does in his videos I'm now watching Awesome Restorations from my garage on a futon because she threw me out again 😊
I am an old guy who just occasionally repaired a broken vase here and changed a bulb there but nothing important. Watching your channel how you are skilled and experienced I can only wish you good health and prosperity 🙏
@AwesomeRestorations
Жыл бұрын
thank you so much Mehmet I am really glad that you like my my video. I also wish you and your family all the best 😊
This video brought back a lot of memories. I spent 16 years re-enacting the American War of Independence, much of it serving cannons. As I watched the video, all I could think of was the loading and firing sequence. All of the cannons I served were beautiful reproductions, brass and iron. Good video....now go buy a swivel gun!
@AwesomeRestorations
Жыл бұрын
Yes Grandpa 😉👍
Уважение и одновременно добрая зависть. Заниматься любимым делом, получать от него удовольствие и делиться радостью от процесса с другими! Удачи!
Не перестаю удивляться твоему мастерству, у тебя золотые руки и очень хорошая фантазия! Ты лучший мастер во всем Ютубе!
@AwesomeRestorations
Жыл бұрын
thank you so much 😊
@gentium1
Жыл бұрын
А разве лучший не My Mechanics? 🤔🤔
@mitrogulf4073
Жыл бұрын
@@gentium1 Они все мастера в своём деле, надеюсь таких умелых людей будет как можно больше )
Всего доброго, Мартин. Воскресенье, солнечный день. Весна🌷. И всё таки не перестаю удивляться: сколько разных вещей можно увидеть через много лет. Здорово, что есть такие люди, которые позволяют нам увидеть их вновь. Нравится смотреть Ваши работы. Обнимаю, жду новых встреч, процветанию канала. 🇷🇺Пока, Мартин. 😘🎉🎉🎉🎉🎉🎉🎉
@AwesomeRestorations
Жыл бұрын
thanks a lot for your comment. I wish you a happy Sunday 😊
Not only this project show that you are a true artist but it also revealed your inner child, the one that likes fire and bang.
I'm impressed that you chose to make your own fuse, rather than buy commercially available fuse. I've always wondered how they used to make it.
Какой чудесный день сегодня! Спасибо за видео, друг!
@AwesomeRestorations
Жыл бұрын
thank you very much for watching 😊
I can't help but feel like you were smiling when you said "it's time to clean the balls"😅
@masterthreeok
Жыл бұрын
Hahaha. The same here
@anoskov7820
Жыл бұрын
"To polish balls" he said
@georgejones3526
Жыл бұрын
@@anoskov7820 Both. 09:07 - “It’s time to clean the balls.” 12:00 - “Polishing the balls.”
@theluth9046
Жыл бұрын
Well, we need to get our minds out if the gutter,NOT! I loved this comment!
@capers72424
Жыл бұрын
Oh, he ABSOLUTELY was!
Здравствуйте, Мартин. Большое спасибо за проделанную работу, очень интересно наблюдать за работой настоящего мастера!👏👏👍
@AwesomeRestorations
Жыл бұрын
thank you so much 😊
That rotating work bench caught me totally off guard. How cool is that! Gave me some great ideas for my own shop!
@AwesomeRestorations
Жыл бұрын
Glad to hear it!
Сколько смотрю не перестаю удивляться, это самое главное в вашем творчестве, продолжайте и дальше нести людям радость, творить и удивлять, Дай вам Бог, здоровья и любви.
@AwesomeRestorations
Жыл бұрын
thank you so much for your comment I really appreciate it
So clever! Always respectful of the item being restored and the results are amazing. Bravo!! 😊
@AwesomeRestorations
Жыл бұрын
thank you very much James
Не перестаёте удивлять, Мартин.Работа как и всегда -на Высоте.Удачи.
Спасибо вам за очередную шикарную реставрацию !!!!!!!!!!
@AwesomeRestorations
Жыл бұрын
thank you very much for watching 😊
Watching you work, with all the knowledge and experience behind you is truly an awe inspiring watch. I admire your care and attention to detail as well as the respect you show for the items you work on. Great video. 😃👍🏻
@AwesomeRestorations
Жыл бұрын
thank you very much I am glad you liked the video 😊
Твои видео интересно наблюдать и они успокаивают.
@AwesomeRestorations
Жыл бұрын
I am really glad that you think so thanks for watching 😊
Still trying to put a finger on exactly why your videos are so relaxingly satisfying, but they are. Really enjoy your work and, of course, your craftsmanship is amazing.
Awesome job, and yes other than Animal, Beaker was one of my favorites. Had to comment when you asked if we knew those guys. I enjoyed the work you've done and the time you've put into actually sharing the process of what it takes to restore things. Lots of prep and thought goes into the proper restoration work that most people overlook.
@AwesomeRestorations
11 ай бұрын
Beaker is really a fun character :) very glad you liked the video thanks for watching
What can I say, Martin... Every antique artifact that you restore comes back to life. And I'm sure that whoever owned them in the past, wherever they may be, bare a smile on their face. Thank you, Maestro!!!
@AwesomeRestorations
Жыл бұрын
thank you so much I really appreciate it :)
Спасибо за видео, Мартин! Как всегда очень завораживающе, восхитительно, и с любовью! Очень круто!!!
@AwesomeRestorations
Жыл бұрын
thank you so much Nick
Watching each one of your videos has been like a meditation session. I feel indebted to you for what you do. Thank you.
@AwesomeRestorations
8 ай бұрын
thank you so much for watching 😊
Might be my favorite one yet, it’s restored, but still looks old at the same time, I love it. Great job.
@AwesomeRestorations
Жыл бұрын
Thank you very much!
You never cease to amaze me. Your attention to detail is incredible. I always read the story in the description box, so thank you for your detailed explanations.
@AwesomeRestorations
Жыл бұрын
thanks a lot foe watching I am really glad that you liked it
it's so soulful, every video, every new restorations. 18 mins for watchers vs dozens hours of restoration work. It's AWESOME! ty😊
@AwesomeRestorations
Жыл бұрын
thank you so much 😊
Liking and commenting on your videos 😂 feels just like a routine habit ❤❤
@AwesomeRestorations
Жыл бұрын
which I very much appreciate Rohit 😊❤
Огонь! Спасибо автору за то что делиться своим опытом и знаниями. Хорошая работа, так держать!
Yet another excellent restoration by the Awesome Martin. I love that you left the old degradations in the material to show the age of the piece. The repair of the cannon itself was on point. Keep up the good work Martin. I always anticipate your next project.
@AwesomeRestorations
Жыл бұрын
thank you very much really glad you liked it I also think it turned out very well 😊
Your talent never ceases to amaze me. You do such amazing work bringing those antiques back to life!! Something tells me you were as excited as a young boy when you were firing those powder charges!!! That had to be fun!!!
@AwesomeRestorations
Жыл бұрын
thank you so much for your comment I am very happy that you liked it
@brucek6563
Жыл бұрын
@@AwesomeRestorations You're welcome!
I looked on in terrified awe as you picked up the base at over 180 degrees Celsius with your bare hands, barely flinching. You, sir, are truly a different breed.
@AwesomeRestorations
Жыл бұрын
my hands are dead from burning them 😅
as always: AWESOME ... i love the little Beeker! Made my day!
@AwesomeRestorations
Жыл бұрын
thank you so much I am glad you liked it 😊
Как всегда,работа на высшем уровне!
@AwesomeRestorations
Жыл бұрын
thank you so much
@Shitty_dino_fan.antifurandlgbt
Жыл бұрын
@Prodigy тоже фан Продиджи? Одобряю! Тоже их слушаю!
@prodigy7635
Жыл бұрын
@@Shitty_dino_fan.antifurandlgbt 👍👍👍
@prodigy7635
Жыл бұрын
@@Shitty_dino_fan.antifurandlgbt Как можно их не слушать? Легенды!
@Shitty_dino_fan.antifurandlgbt
Жыл бұрын
@@prodigy7635 согласна!
Great job on the restoration of the antique salute cannon! It's amazing to see how it went from a rusted and neglected piece of history to a beautiful and functional cannon once again. The attention to detail and the dedication to preserving history is truly impressive. Thank you for sharing this incredible restoration process with us!..Thank you from Qatar 🇶🇦 🇶🇦 🇶🇦
@AwesomeRestorations
Жыл бұрын
thank you very much for watching I am glad you liked the video 😊
What a pleasure to watch someone that really knows their craft...right down to the fuse making Thank you!
@AwesomeRestorations
Жыл бұрын
thanks a lot for watching Tony :)
Как же я ждал момента когда из нее будут выпускать снаряды) радовался как в детстве=) Спасибо Вам за проделанную работу и подаренные эмоции!
@AwesomeRestorations
Жыл бұрын
thank you very much for watching :)
@jenniferwilson1481
2 ай бұрын
@@AwesomeRestorations you are the best
The amount of knowledge this guy has is astonishing. Unbelievable . Well done
@AwesomeRestorations
9 ай бұрын
thanks so much
Well done, my friend. Stellar job as always 👌
@AwesomeRestorations
Жыл бұрын
thanks so much Richard
Looks good! And I loved Beaker. I think Mr. Bill would've enjoyed watching that restoration. Up close.
@AwesomeRestorations
9 ай бұрын
thank you so much. I hope he would have enjoyed it ❤
I think you are hugely talented sir. I don't know anything about metalwork, however, you piqued my curiosity from start to finish. Bravo my man !
@AwesomeRestorations
8 ай бұрын
thank you so much I am glad you liked it 😊
That was in rough shape unfortunately but you did a great job bringing it back Was also interesting to me how you made the loads & fuse . Thank you for bringing it to us all the best to you 👍
@AwesomeRestorations
Жыл бұрын
thank you very much for watching I am glad you liked it 😊
Wow, I was completely blown away by this video! Your attention to detail is truly impressive. I can tell that you put a lot of effort and passion into creating this content, and it really paid off. As someone who is always looking for informative and engaging videos, I'm excited to have found your channel. Keep up the amazing work, and I can't wait to see what you come up with next!
@JB-yb4wn
8 ай бұрын
Restoring an old Russian nuke.
When you load the red Beaker into the gonne and his little twine arms shake I laughed and subscribed. Nice restoration and a showcase of skills.
@AwesomeRestorations
Жыл бұрын
thanks a lot Kelvin I am glad you liked that. Thanks for subbing and welcome aboard 😊
Nice project Martin. I like the powder coating. First I will buy a sand blaster cabinet so I can clean my old snowmobile parts. 🤟👍🤟
@AwesomeRestorations
Жыл бұрын
thanks a lot - sounds like a good plan :)
Bloody nora mate. Not only are your restorations epic but the delivery is top notch. Well done, simply amazing.
@AwesomeRestorations
Жыл бұрын
many thanks Andy 😊
@Ofthe7thSon
Жыл бұрын
@@AwesomeRestorations more than welcome mate. The manner in which you deliver the amazing work is unbelievably entertaining and a joy to watch.
Você, como sempre arrasando. Belíssimo trabalho!!!!!!!!!!! Ficou perfeito..
@AwesomeRestorations
Жыл бұрын
thank you so much I am really glad you liked it
Absolutely *awesome* resto, and Beaker was the perfect touch!
@AwesomeRestorations
9 ай бұрын
thank you - very happy to hear that 😊
Это очень, очень круто мужик!!))) всегда приятно наблюдать за твоей работой!)) спасибо за то что ты делаешь))
@AwesomeRestorations
Жыл бұрын
Thank YOU for watching 😉👍
Thanks for your hard work
I like the workshop fridges and their contents :) All workshops should be equipped thus
@AwesomeRestorations
8 ай бұрын
Yes, CHEERS 🍻
Являюсь Вашим подписчеком! Вы Мастер! Каждое Ваше видео это профи! Одно удовольствие смотреть и принимать Ваш опыт. Всего Вам хорошего!
@AwesomeRestorations
Жыл бұрын
thank you so much 😊
Thank you keeping the antique look to the casting. I think that makes it all the better when it looks old (because it is) and it is still functioning! Great restoration as usual! Feeling bad for Beaker though🤣🤣
@AwesomeRestorations
Жыл бұрын
many thanks :) Beaker is ok again now and ready for new adventures 😊
Впечатляет! Спасибо!
@AwesomeRestorations
Жыл бұрын
thanks a lot for watching :)
Heroes are immortal! Old cannon is ready for new fights!
كل يوم اشاهد الفيديوات الخاص بيك ممتعه متابعك من العراق 🇮🇶❤
WOW! What an amazing transformation!
@AwesomeRestorations
Жыл бұрын
thanks a lot
Watch you all the time. I don't think there is anything that you can't do. Love everything you do 😊
@AwesomeRestorations
11 ай бұрын
thank you so much :) you are very kind
This type of videos are great. Since I discovered almost 5 years ago. At the day of today, im proud of myself to be a industrial mechanic. THANKS.
@AwesomeRestorations
5 ай бұрын
glad to hear that 👍😊
Приветствую 🤝✊ всё просто замечательно 👍 ты как всегда очередную вещь,вернул в строй вернул к жизни 🤝✊👍👍👍👏👏 Спасибо с большим удовольствием смотрим за твоим творчеством 🤝✌️🔥 Благодарим Тебя!
@AwesomeRestorations
Жыл бұрын
thank you very much I am very glad you liked it 😊
Навыки дантиста, пекаря, бармена и др. помогли Мартину воссоздать пушку для праздников. На радость зрителям его чудесного канала!
@AwesomeRestorations
Жыл бұрын
thank you very much :)
This was very satisfying to watch, am trully glad youtube recommend this.❤
Excelente trabajo, admiro la dedicación y el amor que le coloca a estás restauraciones 👍
@AwesomeRestorations
9 ай бұрын
thank you so much :)
Always fun to watch your videos, quality time well spent! Also, always liked the look of these old cannons, so it was a bonus, you could say! If you are given the chance of restoring a real-size cannon, that would bring a huge smile on your face (and ours!). Nice one (again)!
@AwesomeRestorations
Жыл бұрын
many thanks I am so happy that you liked the video :)
Прекрасная пушка , прекрасная работа!!!👍👍👍
@AwesomeRestorations
Жыл бұрын
thank you very much
ive been wanting one of those salute canons for years.
@AwesomeRestorations
Жыл бұрын
I understand that they are really cool :) Imagine wakening up your nighbours every morning witha salute 😂
Very cool work, well done creator, may God protect you
@AwesomeRestorations
Жыл бұрын
Thank you very much
Que restauração incrível!!! Gosto muito dos seus vídeos 👏🏻👏🏻👏🏻🤘🏻🤘🏻
@AwesomeRestorations
Жыл бұрын
thanks so much 😊
seeing how you restore objects is one of the most beautiful things I've ever seen, congratulations for the effort you put into it ❤
@AwesomeRestorations
Жыл бұрын
Thank you so much 😀
@pierinho97
Жыл бұрын
You're welcome 😊
God! This was beautiful to watch. Point blank. I'd never seen anything like this before.
@AwesomeRestorations
Жыл бұрын
thank you so much 😊
Всё аккуратно , кропотливо , с душой , чистенько , хорошим инструментом . Молодец! Очень приятно смотреть на такую работу !
@AwesomeRestorations
Жыл бұрын
thank you so much
Не перестаю удивляться вашему мастерству😮 Пушка получилась очень интересная😊
@AwesomeRestorations
Жыл бұрын
thank you so much
Excellent work on this restoration. I enjoy watching all of your videos, keep up the amazing restorations
@AwesomeRestorations
Жыл бұрын
thanks a lot
These beautiful cannons were practical objects to defend beautiful landed gentry their estates. They were used to fire upon criminals who tried to steal or damage Good restoration
@AwesomeRestorations
Жыл бұрын
thanks for your comment 😊
Disfruto viendo cuán cuidadosamente trabajas en estos proyectos de restauración. Magnífico trabajo como siempre!
@AwesomeRestorations
Жыл бұрын
Thanks a lot 👍
За ваши работы только👍
@AwesomeRestorations
Жыл бұрын
thank you
Привет друг,все как всегда супер👍👍👍
@AwesomeRestorations
Жыл бұрын
many thanks
Poor Beaker! Love that you use powder coat.
BABOOM! Fantastic Martin!
@AwesomeRestorations
Жыл бұрын
thank you so much Fannie
Здравствуйте,Вы очень талантливый и увлеченный человек!👋 Прекрасные работы по реставрации,столько вложено труда и мастерства👍❤️
@AwesomeRestorations
Жыл бұрын
thank you very much 😊
Martin, since yesterday I have been binge watching your videos. You are nothing short of astounding! Think about doing a Q&A with your subscribers please!
@AwesomeRestorations
Жыл бұрын
I might, maybe 😉👍
For me you made it better than it was originally! Thanks for sharing! 🎉🎉🎉
@AwesomeRestorations
Жыл бұрын
thanks so much glad you think so
you are truly the master of restorations and i thoroughly enjoyed the video keep up the good work and i look forward to your next restoration video bro
@AwesomeRestorations
Жыл бұрын
thanks a lot Daniel I really appreciate it 😊
@TheNutter44
Жыл бұрын
@@AwesomeRestorations your welcome bro
Dear Martin, This one is magnificent. Very meticulously done. Keep it up 🙂
@AwesomeRestorations
Жыл бұрын
thank you very much Rohit 😊
I remember kids could order similar cannons from a comic book ad up to the 1960's. Of course, yours is much older & deserves reverence. Well done!
@AwesomeRestorations
10 ай бұрын
thank you so much
As always the work of the master at the highest level! I am very happy when something has a second life. thanks for your efforts👍👍👍
@AwesomeRestorations
Жыл бұрын
Wow, thank you!
I'm afraid to imagine how much this nineteenth-century rarity cost you. In any case, I'm sure it was worth it. Everything that falls into your golden hands takes on a new life.
E vamos a mais um vídeo perfeito, toooop , parabéns, e obrigado por alegrar nossos domingo. Aquela morça precisa de restauração, podia fazer para nós 😂 🦉
@AwesomeRestorations
Жыл бұрын
thank you so much Lucas happy Sunday to you too 😊
You’re a genius, man. That flip work bench is worth it’s weight in gold!
@AwesomeRestorations
3 ай бұрын
thank you so much 😊
スウェーデンの敬礼砲を修復するなんて、すごいです! 豊富な知識と素晴らしい技術の賜物ですね😊
@AwesomeRestorations
9 ай бұрын
thank you so much :)
As always, a great restoration job worthy of a master craftsman, and a great editing job on the video, thank you very much for sharing. I think your next video will be the restoration of the vise, right? 06:38 It's very rusty 😁, I send you a big hug from southern Argentina.
@AwesomeRestorations
Жыл бұрын
thank you so much and thanks for watching I am really glad you liked it 😊
Why were canons black, anyway?
@liamthecoolone3196
24 күн бұрын
Becuse it made it easier to see and load it after shot
@TAG77
23 күн бұрын
Because they were blued to keep from rusting. It’s a heating and oil process with the iron that stops rusting that leads to decay when at sea on naval ships or on the battle field with rain.
@agoogleaccount2861
14 күн бұрын
They were heated and painted with linseed oil or japanning to prevent corrosion much like the inside of this cannon was destroyed by
@TAG77
14 күн бұрын
@@agoogleaccount2861 jappaning is a different technique with painting. Not oiling. Just an FYI. Hot bluing is what you’re referring to where you use heat and oil. There’s also cold bluing and it’s done with a chemical, not oil.
@agoogleaccount2861
14 күн бұрын
@@TAG77 they definitely don't cold blue cannons! . It depends on where they're being used. The dutch east India company was fond of jappaning all their arms from musket to cannon as corrosion protection it's a sort of black gooey varnish and takes awhile to dry
Hello, always a great pleasure to see videos of all the time you spend restoring and bringing these objects back to life. I hope you are happy with your new equipment.
@AwesomeRestorations
Жыл бұрын
thank you so much Julien. I am very pleased with my new tool :)
@julienbailly3830
Жыл бұрын
@@AwesomeRestorations 👍 oh happy for You here is the start of a new adventure with great projects to come
Much skill and patience. Enjoy your resorations immensely.
@AwesomeRestorations
Жыл бұрын
thank you very much Alan
I salute you my friend 🫡 awesome work once again.
@AwesomeRestorations
Жыл бұрын
Thank you! Cheers!
The music choices are incredible
Great job there. So neat. Thanks.
@AwesomeRestorations
Жыл бұрын
thank you so much ❤
Admiro su inteligencia, y el amor que pone en su labor❤
I love sandblasters. I have been using your techniques to do some pretty awesome repairs on equipment that is immersed in harsh chemicals. I’d like to recommend another chemical to try. CLR!!! It gets into corrosion areas, especially aluminum. Between the CLR, Marvel Mystery Oil, and PB Blaster, along with judicious use of a sandblaster, I’ve brought back some pretty well jammed steel parts on some equipment that would normally be scrapped. You have given me insight on how to revive things, I give you the three items above!
I really love your care and attention to detail on this restoration
@AwesomeRestorations
Жыл бұрын
thanks a lot