Great tutorial! I paid $180 for this kit off Amazon.

@WagnersTechTalk

Ай бұрын

Thank you, hope you're enjoying it!

Thanks. I was researching how much is covered by the passive heatsink, and your video showed it at 4:25.

Greetings. I'm waiting for this same kit to be shipped from Canakit; I ordered it about a week ago. I'm excited about getting it. I have built many PCs over the past 20 years. This will be a different animal, and surely a lot smaller. I am looking forward to learning some programming and just messing around. I've programmed SPSS+ MS-DOS version back in the 1980s and 1990s, and learned the bare essentials of Fortan back in 1969 (with very little success, using punch cards on a Control Data mainframe). I just fouind this video, and will link up to the Rasp Pi 5 guide as well. Thanks so much for doing this. I just subscribed to your channel and look forward to viewing some of your other videos. I've read about RP for some years now, and decided to take the plunge, especially with Pi 5 freshly released. Thanks again.

@WagnersTechTalk

5 ай бұрын

Thank you so much for your kind support! One of the applications you may want to download is Visual Studio Code, it's a great code editor for a number of different languages. I use it frequently. In the Pi 5 Getting Started video (came out just prior to this one), I briefly touch on how to install it but not about it's usage. That's awesome that you got started with Fortran and punch cards. I missed out on the punch card era (don't think I missed much from what I hear). My first exposure to computers was using a TI-99/4A, then later on an AS/400 using RPG III, professionally (early 90's). I did some Fortran programming in college, but briefly. Those were exciting times for the both of us! I hope future videos are just as exciting to you. I do want to mention, the next 3-4 videos coming from me likely won't be Pi 5-related (You'll see some virtual pinball content during that time.) However, don't worry more PI 5 content is coming.

This video is fantastic. good work.

@WagnersTechTalk

4 ай бұрын

Thank you very much!

Thanks for this very good presentation! With years (and experience), Canakit is now my sole seller for RPi...

@WagnersTechTalk

6 ай бұрын

Thank you so much! CanaKit does a fantastic job with their kits. I've used/reviewed many of their products over the years, they have excellent products and equally impressive support.

@gergemall

5 ай бұрын

I’m excited to learn more about it.

Great video. Thanks for sharing.

@WagnersTechTalk

2 ай бұрын

Very welcome, thank you for watching!

Thanks for the review! Im gonna go with the 256gb white version personally.

@WagnersTechTalk

5 ай бұрын

Very welcome, thank you for watching!

Excellent tutorial!

@WagnersTechTalk

23 күн бұрын

Thank you for your kind comment and for watching 😎

Thanks for the review on the CanaKit starter kit. But one question: 74 degrees Celsius is approximately 165.2 degrees Fahrenheit. Are you sure the CanaKit gets that hot?

@WagnersTechTalk

4 ай бұрын

Those are the readings that the stress tool generated. I placed all the commands used for this test here, if anyone wants to re-create/test: wagnerstechtalk.com/rpi5/#Stress_Test

I have been looking at this case, but i was hoping to use the official active cooler with it, since i already have it

@WagnersTechTalk

6 ай бұрын

While not a thorough test, you can use your Active Cooler with the CanaKit case. In this video, created for you exclusively, you'll see that you can use the Active Cooler with the CanaKit case: kzread.info/dash/bejne/nZNhvKmvdaTOd5M.html (I was also curious). Once you see this video, please comment below that you saw it so that I can delete it.

@toyotayoda

6 ай бұрын

Awesome! Thanks sooooo much! I really appreciate that.

@johnnyc.31

6 ай бұрын

@@WagnersTechTalkI wish this now deleted video was part of the main video above, as I’m also curious. Regardless thank you for the very thorough videos. Excellent resources for a pi newbie.

@WagnersTechTalk

6 ай бұрын

@@johnnyc.31 Thank you Johnny for your kind comments. I deleted it as it wasn't a thorough test, but simply installing the active cooler into the CanaKit case which the OP wanted to know. The CanaKit already includes a comparable heatsink and fan (actually, the CanaKit fan is quieter than the active cooler fan). However, I may do a more "official" follow-up video at a later time, if there is demand for it. The active cooler will definitely fit/work with the CanaKit case, but you'll have to remove the CanaKit heatsink, of course.

This only issue I have is that the case falls apart. I have it mounted and the pi-hole machine. BUT it is super quit, stays cool, and works perfectly

@WagnersTechTalk

2 ай бұрын

Thank you for your feedback, the case snaps together easily which could be a pro/con . Hope you're happy with it overall!

@jumpnjack808

2 ай бұрын

@@WagnersTechTalk I am 100%..

@TheNextext

Ай бұрын

I thought the fan was broken

Hey my Pi5 is running at 78.5 degrees.. I misaligned the heatsink. Is this too hot? Or should i be fine?

@WagnersTechTalk

Ай бұрын

Check with CanaKit on that one, I don't want to tell you wrong. Here's their contact info: www.canakit.com/Contact

Can you overclock with this set up? Mine arrives Thursday.

@WagnersTechTalk

5 ай бұрын

Yes

@vengaellington

4 ай бұрын

@@WagnersTechTalk do a video test of overclocking with the canakit pi 5 with the cpu overclocked to 3 Ghz and the Gpu overclocked to 1 ghz.

Will this exact setup (Pi 5, and 8 GB) stream and play 4K video with ease?

@shapesofpixels

3 ай бұрын

With ease no but it does stream 4k safely (from my knowledge anyway)

I gonna save $2600 TTD for a screen and this kit

Mine just came in the mail from Amazon. It didn't come with a fan and it doesn't have the vents shown. It also didn't come with a heat sink. Is that a problem? The QR code in the manual sent me to this video.

@WagnersTechTalk

Ай бұрын

Did you perhaps pick up the one with the aluminum case (this one amzn.to/3JGlqyo )? If so, you should be good. I've not personally reviewed that model but it uses passive cooling rather than active (fan) cooling.

@Barnardrab

Ай бұрын

Yes, that's it.

Is it a metal case or plastic??

@WagnersTechTalk

3 ай бұрын

The case is plastic.

Interesting that it would not connect to my Verizon Home 5G internet. My password is not incorrect because I'm still using the one on the bottom of the router they sent me and have used it to connect multiple devices to on my home network which is how I'm streaming your video, in fact. Seems like a network driver/protocol error. Unfortunate.

@WagnersTechTalk

Ай бұрын

I had an issue similar to that with a Pi 3B+, but not using by ISPs WiFi router but my own. I wound up resolving it by doing two things: 1) I separated by WiFi 2.4/5Ghz bands into two separate SSIDs. 2) Removed special characters in the WiFi password for the 2.4Ghz band. One or both of the above may help, if a direct Ethernet connection is possible that will also work immediately.

@jonassteinberg3779

Ай бұрын

@WagnersTechTalk I'll check these out, thanks!

I loved my Rpi 4, but ultimately sold it. Updates fail in the dumbest ways. Give me something like an .exe or .apk, not some janky process that will fail if one file has trouble downloading.

@WagnersTechTalk

6 ай бұрын

I hear what you're saying, for me that's been a very uncommon issue that is typically related to not updating the Pi or unstable internet connections. However, there are multiple Android distributions for the Pi as well (for the Pi 4, Pi 5 versions are coming). Even have Win11 on the Pi 4, though not the ideal experience. With the more powerful CPU+GPU on the Pi5, should be some interesting options in the future. Thank you for watching!

It's not a turbine. Not even close.

@WagnersTechTalk

5 ай бұрын

That is how they named the product: "CanaKit Raspberry Pi 5 Starter Kit - Turbine Black"