cammed lt1 camaro
Ойындар
my 95 z28 lt1 camaro. not fully tuned yet. tick hatermaker 2 cam. lunati springs, comp rockers and guides, ported and polished lt1 heads and intake, bbk twin 58mm throttlebody, 42lb injectors, trickflow cold air intake, speed engineering long tube and true dual exhaust. initial tune by strong speed works and full tune will be done by him as well. 4l60e already smoked, street/ strip build on trans coming soon
I know there isn't really a lot in the videos, I hope to complete the car soon and get some good content.
Пікірлер: 109
The more I listen, I’m getting the opinion that the Lt1 sounds better than the LS1, sounds 👍🏻
@mr_steve_g
2 жыл бұрын
I'd have to agree with you on that. Only engine that sounds better is a big block in my opinion.
@QuietDriver97
11 ай бұрын
That's the last of the old school 23 degree valve angle small block in perfect harmony.
@CIVPIT510
5 ай бұрын
The timing in the cam order is different in the LS1, that's why it sounds different I believe
@Juansolo_
8 күн бұрын
@@mr_steve_gsorry for my ignorance... But is the LT1 a small block?
@mr_steve_g
8 күн бұрын
@Juansolo_ the LT1 is a gen 2 smallblock. Basically a redesign of the original smallblock.
I wish Forza had that model Camaro
I like how tamed down it is. Got a 97ss in the garage collecting dust.
Sounds amazing one day i need to swap a 5 or 6 speed into my 94 Fleetwood one day I have the whole build in my head already I’ll get there one day
I’m in love with your cam my 82 is getting a brand new motor in it and I really hope the cam that’s going in it is like yours I told them I wanted it extremely cammed etc etc etc
Need more content on this beast!!!!
Sounds great man, I’m waiting on the same cam. Not many videos on the hatermaker2.
@mr_steve_g
3 жыл бұрын
Thanks, I was a a little nervous about this cam. After I bought it I was thinking that I should have gotten the 3. I'm glad I got this one though
@mattbojo9791
2 жыл бұрын
I also just got the stage 2 what rocker arms are yall using?
Bro. That’s sounds good 💪🏽❤️. I want my 94 Z to sound like that
94 looks like. My car exactly except mine has grey stripes. She’s killer 👍🏻
Sounds badass man.
@mr_steve_g
2 жыл бұрын
Thanks
Sounds/looks killer,enjoy
Sounds perfect
Dude post more when you can. 🤘🏽
@mr_steve_g
Жыл бұрын
I sold this engine and trans. Building a 415ci LS for it now
Sounds good
Love it!!
I am not a very big fan on how these 4th gen f bodies look but for the money you can’t beat the horsepower per dollar of these pre ls1 z28s 275-280 horsepower and a T56 6 speed straight out of the box the downsides are the engine bay is smaller than that of the 3rd gen f bodies and the lt1 doesn’t interchange parts with the gen 1 L98 sbc which means those literal decades of performance parts won’t work on this engine so you have to choose from a much smaller limited aftermarket tbh down the road on the main road passing by town there’s a green z28 just sitting there I am talking about a town here over here🇵🇷 called San Sebastián if you know you know 🤷🏽♂️
I'm glad you went with Brandon Strong. He's got some amazing tuning abilities and I hope to one day get where your at with my LT1 formula 6 speed. How did you like the Speed Engineering headers?
@mr_steve_g
3 жыл бұрын
Thanks. I love the headers, they fit perfect and look great. I'm a big fan of speed engineering products. I'm also running their true dual exhaust (with slight modification), adjustable lower control arms and relocation brackets and adjustable panhard rod and relocation kit. I'm waiting on the adjustable tunnel mount torque arm and weld in sub frame connectors to get here.
@StickShiftMuscle
3 жыл бұрын
@@mr_steve_g nice man!! What quarter mile times are you going to run with that set up?
@mr_steve_g
3 жыл бұрын
@@StickShiftMuscle I'm not really sure how much power I'm making. I need to finish the tune and get on the dyno after I'm done building the trans. This is more of a street car, I still have ac, cruise control, abs, and full weight. I'd be thrilled to be in the 11s. I also plan on putting a 100 shot of nitrous on it.
@StickShiftMuscle
3 жыл бұрын
@@mr_steve_g my formula has the bare bones package where it didn't have any options at all and I love it. I'm not gonna gut anything. Just want enough power to hang with my cousins 392 challenger. I do love my formula hardtop, crank windows, M6, no trac or cruise control. Reminds me of my C3 corvette I have.
@FSTFORMULA93
2 жыл бұрын
@@StickShiftMuscle what year? I have a 93' with no options/hard top m6 etc. Had it 20 years this September. I've never seen another with no options like mine.
What wheel and tire setup is that? Looks super nice!
@mr_steve_g
2 жыл бұрын
JMS 17x4.5 front 15x10 rear. Mickey Thompson Sportsman S/R Radial 27X6R17LT front, Mickey Thompson drag radials 325 50 r15 rear
What are you revving this cam to? Tick website says makes peak power at 6600. That seems a bit high for a stock bottom end
@mr_steve_g
2 жыл бұрын
I've got my rev limiter set at 6800 and have hit it several times. The car sees 6700+ all the time with no issues so far. Yes, a bit high for a stock bottom end. We'll see how long it lasts.
Sounds great! I was going to get the speed engineering true daul exhaust but decided to go with SLP loudmouth instead.
@ThatNofbody
2 жыл бұрын
How does it sound I have some left over slp loud mouths but I heard it sounds shitty on the lt1 so I never did it
Is it all tuned up? What kind of power are you putting down? I've got a cc306 in mine looking to upgrade the heads soon
@mr_steve_g
6 ай бұрын
I did tune it. I don't know what kind of power it made. I sold it
Any 11 sec lt1 on the streets not strip with stock converter and maybe 3.23 or 2.56 rear end gears without the huge tires? Any build to recommend?
@mr_steve_g
2 жыл бұрын
Well, I wouldn't use the stock converter or either of those gears but, the 3.23 would be better than the 2.56. Beef up the transmission and get a good converter. Either work the stock heads or get a good set of aftermarket ones. Port match the intake. Throttlebody, injectors, cam, exhaust, a good tune and maybe some nitrous.
@jean-marckhater2181
2 жыл бұрын
@@mr_steve_g i want NA engine no nitrous. I live in the mountains so a low stall or stock converter is a must for overheat. Just need to know if somebody has done it and knows what is needed.
Nice! What tires are in the front ? I’ve got the same wheels for my fbody
@mr_steve_g
2 жыл бұрын
Mickey Thompson Sportsman S/R Radial 27X6R17LT
@bnrz28
2 жыл бұрын
@@mr_steve_g nice man sounds and looks clean
@mr_steve_g
2 жыл бұрын
@@bnrz28 thanks!
How much power did it make
Fuel pump?
Sheesh ❤️
I got mine 'hatermaker 2' now I just need free time to put my motor together and tranny , 95 vette, this video sound great!! Any timeslips in the quartermile?
@mr_steve_g
2 жыл бұрын
Not yet. Will have to wait till next season. I'm going to be doing some minor weight reduction and building a rear end.
@DanielG007
2 жыл бұрын
What gears are you gonna run and do you already got a stall? Or is it a stick?
@mr_steve_g
2 жыл бұрын
@@DanielG007 I have a 3600 stall. Undecided on a gear but most likely a 4.10
@terryleach769
2 жыл бұрын
With you having a 3600 stall can a 4L60e handle that ?
@terryleach769
2 жыл бұрын
Im building a lt4 camaro .60 over forged bottom end and procharger bitch is going to haul ass but I don’t have the stock rearend I got the quick performance rearend and the 4.10 gear is peefect
post more videos we wanna hear it sing
@mr_steve_g
2 жыл бұрын
I'm working on it. I'm not the best at video stuff but I have a couple of ideas
What’s the wheel/tire combo…any rubbing
@mr_steve_g
2 жыл бұрын
Jms 17x4.5 front 15x10 rear. Mickey Thompson 27x6 front and 325/50 rear. No rubbing
Sounds Great, do you try at the track yet? 👍
@mr_steve_g
Жыл бұрын
No, I sold this engine and trans and am building a turbo ls for it now
@rrbdragracing7501
Жыл бұрын
@@mr_steve_g o ok and good luck, 👍
Dam looks good, what rear tire size & is it stock ride height 👍
@mr_steve_g
2 жыл бұрын
325/50r15. Lowered about an inch in the rear
@stevestauff2220
Жыл бұрын
@@mr_steve_g what offset are the rears and did you swap out the 7.5 rear? I’m about to get a 94 z28 is why I ask
@mr_steve_g
Жыл бұрын
@@stevestauff2220 +51mm offset. Stock rear end housing.
@stevestauff2220
Жыл бұрын
@@mr_steve_g thanks bro
I want to cam my camaro but can’t find a tuner here in Memphis
@mr_steve_g
2 жыл бұрын
You can do a mail order tune. Look up strong speed works on Facebook.
🔊💯❤️
Ik you have the stage 2 camshaft but what exhaust are you running on it?
@mr_steve_g
Жыл бұрын
Speed engineering long tube headers with their true dual exhaust for LS engines that I modified.
@mikeoconnell9019
Жыл бұрын
thank you! nice setup
What’s your wheel and tire combo?
@mr_steve_g
2 жыл бұрын
17x4.5 front 15x10 rear. 27x6r17 front, 325/50r15 rear
What mufflers are you running? Sounds real good
@mr_steve_g
2 жыл бұрын
Speed engineering true dual system that I slightly modified
Just cam and supporting mods? Or rotating assembly too?
@mr_steve_g
11 ай бұрын
It had a stock rotating assembly
@brando7655
11 ай бұрын
@@mr_steve_g so just cam and rockers?
@mr_steve_g
11 ай бұрын
@@brando7655 cam, rockers, springs, bigger valves, ported and polished heads, ported and polished intake, bigger throttlebody, bigger injectors, long tube headers, true dual exhaust, tuned stock pcm, stall converter, and probably some stuff I can't remember
@brando7655
11 ай бұрын
@@mr_steve_g nice I appreciate feed back. I’m putting together a 86 cutlass with a carbed lt1 I’m just looking at options for cams without going too deep into motor
@mr_steve_g
11 ай бұрын
@@brando7655 I loved this cam. I would definitely recommend it
Ever take it to the track? I see people with le2 top end and his 227/235 cam running mid to high 11s wonder how this cam does compared to it
@mr_steve_g
2 жыл бұрын
No times yet, I've been tuning and trying to dial in the suspension. Pretty sure I destroyed the forward sprag in the trans last week so I have to take care of that. Local track closes for the winter soon and I'll probably have to wait till next season to get some numbers. I'm guessing low 11s
@tuckerprestridge559
2 жыл бұрын
@@mr_steve_g sbe? Man sounds amazing and I’m sure it pulls pretty hard. Also if your still a 10 bolt what axels do you recommend I’m going a trutrack diff and no idea what axels and suspension I all need to make it hook up
@mr_steve_g
2 жыл бұрын
@@tuckerprestridge559 yeah, stock bottom end and stock 10 bolt for now. I'm going with a quick performance 9 inch though. Just waiting on the 10 bolt to blow up first, which shouldn't be long. I'm also building another lt engine that will be forced induction and nitrous. I built this one just to get the car moving.
How much power you making with this setup?
@mr_steve_g
2 жыл бұрын
I have no idea
Did you 411 swap it?
@mr_steve_g
2 жыл бұрын
No, I'm running the factory pcm
Sounds good hate the wheels tho
What can u use
@mr_steve_g
2 жыл бұрын
Tick hm002
@pyromac8414
2 жыл бұрын
@@mr_steve_g where can I order that cam
@mr_steve_g
2 жыл бұрын
@@pyromac8414 you can get it from tick performance.
Sounds perfect