1994 LT1 Camaro performance camshaft swap Long tube headers test drive 4th gen f body pov cam sound
Автокөліктер мен көлік құралдары
1994 LT1 Performance Camaro camshaft swap Long tube headers
To help support the channel please "click"
The like and Subscribe button also make sure you don't forget to click the update bell for new videos.
Thank you for watching and if you have been following the build this is my 1994 Camaro lt1 z28 with a budget camshaft swap and long tubes .. check out the other videos if you want to know about this car.
Once again thank you all for sticking around ..
Project "gREEN bEAN" lt1Camaro Z28
Turn up the volume and hear that sweet sound of Willhoite reground camshaft swap
willhoites cams
specs According to the cam card from this company, it uses a comp cam CS XR282HR-10 230/236 at .050 Maximum valve lift is .510-inch on the intake and .520 on the exhaust. It is ground on a 110 degree lobe separation angle. comp cam xr282hr
Today I fired up the 1994 Camaro z28 and turned it around so I can begin to swap out those weak factory lower controls and Panhard bar from Steinjager #steinjager replace the factory shocks with some cheap eBay Sensen #sensen shock absorbers from #ebay
contact me: maldo72motorsports@yahoo.com
www.maldo72.com/
#lt1
#camaro
#maldo72
Пікірлер: 283
She’s sounding mean keep the vids coming! Great to see another lt1 build in NJ!
@maldo72
3 жыл бұрын
thank you for watching
The right cam and exhaust always changes the game.
@maldo72
3 жыл бұрын
hell freaking yea .... it really wakes up these little lt1's
Just saw your video. Great to see someone caring for a 4th gen and getting it back on the road. I have a 94 z28 as well. Have been restoring it and hope to have on the road this spring/summer.
@maldo72
3 жыл бұрын
Thank you very much for watching little by little ... plus my goal is also to circle back to the transam once this car is sorted out
Watching this makes me miss my old black '94 Z28 and my green '94 Z28 LT1 powered cars😞 They were strong runners!
@maldo72
3 жыл бұрын
yes they are quick with a few mods ....... super fun to drive
Following your build for my 95 trans am. Headers just came in yesterday!
@maldo72
3 жыл бұрын
awesome hit me up Instagram maldo72youtube which headers did you get ?
Nice to see that we are in the 2021 and nothig stop this good old LT1 CAMAROS this make feel like this cars are afew years old lol im so happy to see that 4gens live on cool video man great sound
@maldo72
3 жыл бұрын
thank you for watching yes these old cars still have life left in them and are still pretty quick with a few mods
My first car was a 95z.. 7 years later I still got it. Since I had a brand new honda and some kid totaled it, guess Ill go start up the camaro now. Awesome video, awesome car
@maldo72
3 жыл бұрын
thank you for watching
I liked your smile ! You are living it !
Im in Vegas.I talked to you about a year ago, looks like the green machine is kicking ass!! Awesome. 👌
@maldo72
Жыл бұрын
thank you .... green machine is down spun a main bearing with all the fun i was having lol rebuilding an engine know for spring
Well gosh darn that exhaust sounds pretty darn awesome. 🎶 That bump in the road looked teeth rattling. 😬
@maldo72
3 жыл бұрын
Lol lol you noticed that it took me by surprise also .... well it goes to show you how well the headers fit that it did not scrap lol
Love the excitement at the end. Sweet ride!
@maldo72
3 жыл бұрын
lol yes was super happy to get out and play then it snows lol ...... thanks for watching
She sounds good
@maldo72
3 жыл бұрын
Omg so fun to drive. ..
Awesome vid... Just picked up a 95 six speed lt1 , very cheap. Runs good, now looking forward to do cam, springs and long tubes
@maldo72
3 жыл бұрын
go for it .. cam swap really wakes up these lt1's and thank you for watching
Awesome brother! Nothing makes ya smile like horsepower! Cheers from northern Ontario Canada!
@maldo72
Жыл бұрын
Yes love the sound of these older v8's thank you for watching
Makes me miss my old LS1 Trans Am. 😭
Sounds amazing. It rips.
@maldo72
3 жыл бұрын
thank you for watching still have more work to do
Sick bro sounds hella good and prob a fun car to rip around in every once in a while
@maldo72
4 ай бұрын
thx for watching yes fun car to mess around
Hell yeah brother! Sound good 👍 keep uploading videos I just purchased a 95 firebird formula 6-speed hopefully I start posting videos on it
@maldo72
3 жыл бұрын
subbed to your channel know get some videos up lol
Love it! sounds awesome. I own a 95 z28 and have being thinking about exhaust? Hmmmmm
Sounds badass !
@maldo72
10 ай бұрын
thanks for watching still don't have the new motor in lol lol
car sounds great. i actually ordered a head mount holder to take a driving video of mine since i finally have a working cluster. did a few other goodies over the weekend too.
@maldo72
3 жыл бұрын
Dont bother with a head unit I always hit my head while in car they sell a mouthpiece so you can hold the camera that's what I used
@redemn93
3 жыл бұрын
@@maldo72 now that you mention it, you're right. i already ordered it. i dont see any mouth pieces for phones. i dont have a go pro. ill at least try. im only 5'7. i can slouch a little if i need lol. worst case i think i can buy a go pro mouth piece and use pieces from both to make a mouth piece phone holder.
Sounds like a stock car racer. Very cool! I love the LT1. That's a great engine.
@maldo72
3 жыл бұрын
thank you for watching subbed to your channel cant wait to see what you do with that old jeep plus your vette is looks great
@RestorationObsession
3 жыл бұрын
@@maldo72 My pleasure and thank you!! Yeah, I can't wait to get the ol' Jeep running again. It's fun to drive and gets a lot of attention lol
@maldo72
3 жыл бұрын
@@RestorationObsession yes definitely hit me up on Instagram should put you in contact with #steinjager (there the ones who did my rear lower control arms ) and they make high quality killer stuff for your keep suspension to bring it into the 21 century lol maldo72youtube Instagram
Sounds Great love the videos
@maldo72
3 жыл бұрын
thank you for watching more to come on this car
Makes me miss my 96 z28 sounds good and with the cam I know she's running now
@maldo72
2 жыл бұрын
thanks for watching ... yes love these older cars fun to drive,,,
Sounds good. Can't wait to cam my 97 z28 and put lt headers on it.
@maldo72
3 жыл бұрын
go for it nothing like the sound of long tube headers
Got the same cam in today finishing buttoning it all up hope she sounds as good as yours!!!!
@maldo72
2 жыл бұрын
I hope so too!
Miss my z28 with that LT1 , blew my forward sprag on the trans and had to sell it due to hard times which I wish I never did .. will be back with another one soon though !
@maldo72
3 жыл бұрын
yes been there before had a 97 z28 sold needed the money wish I had it back
Sounds great!
@maldo72
3 жыл бұрын
thank you for watching click the bell for more updates on this project
sounds amazing
@maldo72
2 жыл бұрын
thank you for watching ....
That car sounds freakin good!!! 😄😄😄 I got a 95 Firebird and, I'm hoping to do some upgrades to it later!!! 😄😎
@maldo72
2 жыл бұрын
thank you for watching ..
Sounds amazing brother. Hope I can get my 96 to sound like that
@maldo72
3 жыл бұрын
a cam swap and long tube headers always makes these car sound good
Awesome vid!
@maldo72
3 жыл бұрын
Thanks for the visit
Sounds really good looks like it runs really good too
@maldo72
3 жыл бұрын
thanks for watching yes runs good but needs a good dyno tune runs a tad rich at idle.
@blackmambaz2850
3 жыл бұрын
@@maldo72 that's not too bad at all once you get her tuned that things really gonna haul
Sounds like a proper hot rod my man
@maldo72
3 жыл бұрын
thank you ......
Sounds sweet brother. I have the same wheels on my 95.
@maldo72
3 жыл бұрын
Thanks for watching
best year to have i own 2 of them
@maldo72
2 жыл бұрын
thank you for watching
Gotta love it!!!
@maldo72
3 жыл бұрын
thank you for watching love these old 4th gen fbodys
Awesome sound and camaro brother. I have my motor pretty much together, I'm about to put it back in. Hope to have it on the road in early summer at latest.
@keilylmm6377
3 жыл бұрын
What year is your car? I'm building and restoring my 94 Pontiac Trans am with the LT1. The old LT1 is going to be upgraded after I get the BMR fully adjustable front and rear suspension and kenner. I'm also going to be building a 383 LT1 down the road.
@maldo72
3 жыл бұрын
The Camaro is 94 Transam 95
Nice.
Sounds good
@maldo72
3 жыл бұрын
thank you for watching
Awesome👍🏼
@maldo72
3 жыл бұрын
thank you for watching ...
Man it sounds amazing got a 95 z28 with some trick flows looking to get mine to sound like that
@maldo72
3 жыл бұрын
thank you for watching
Lt1 Getting Down!
@maldo72
Жыл бұрын
thx for watching
Damn, that is one of the best sounding LT-1 F-body's I've heard! Going to look into that Comp Cam XR282HR, just wants to rev
@maldo72
Жыл бұрын
Thank you for watching
@okangmuhammadel6664
Жыл бұрын
@@maldo72 Hey I would really like to do this to my 9c1 Caprice. It's pretty much stock except for the super 44 flowmeters. Love the way the cam makes it sound and wakes it up. All you did was just swap out cams? Did it have to get tuned or anything else after you got it back together?
Song from my ears 😎
@maldo72
3 жыл бұрын
lol same here if you like that check out my other car lol this will be coming back to the channel soon kzread.info/dash/bejne/hX2srqWxpcyccco.html
Man that sound
@maldo72
3 жыл бұрын
thanks for watching more to come for this car
@twelveoclock4877
3 жыл бұрын
@@maldo72 nice nice broha! Thank you! I got a 94 LTI love this things.
Sounds awesome bro, can't wait to get my Trans Am finished up!! Glad to get an update and some great sound clips!! Have you had the Pcmforless tune done yet??
@maldo72
3 жыл бұрын
no not yet and thank you for watching ..... that's going to be another video series I might go with hp tuners data log from a dyno and either have them tune from that
Peace and blessings to you brother! Where at in Jersey are you? I’m currently having my 94 z28 rebuilt and I’m soooo anxious to get it back.
@maldo72
6 ай бұрын
middlesex county
Can you tell me what other mods you have like Optispark or something else? Throttle Body? Fuel pump and Injectors? Thanks ahead of time.
@maldo72
2 жыл бұрын
alot to list .... in some of my other videos i have a break down of all the parts i added to the car ..
Sounds MEAN!!!
@maldo72
2 ай бұрын
thank you for watching and supporting the channel
Beautiful American muscle 💪 very nice
@maldo72
2 жыл бұрын
Thank you 🙌 for watching
@drmindbindercreations2996gijoe
2 жыл бұрын
I have a 1996 z28/ss
Nice to see nj guy, who'd you get to tune it?
Sounds good!
@maldo72
3 жыл бұрын
thanks for watching
@jarmaljackson7455
3 жыл бұрын
No problem I’ve been waiting for this snow to let up so I can take mine out. Also my heater core is out too lol
@maldo72
3 жыл бұрын
@@jarmaljackson7455 yea I had heat and when I did the cam swap I back flushed the heater core so dont know why I lost heat ... will have to look into on my day off .....
@jarmaljackson7455
3 жыл бұрын
I need to try a heather core flush never done one before
@maldo72
3 жыл бұрын
@@jarmaljackson7455 take both houses off that run to heater core and put a water hose in it
Got that same exact car, did you remove the steering column linkage to install long tubes?
@maldo72
3 жыл бұрын
Yes ..
Hey bro you never mentioned tuning after the cam swap. Is it tuned, if so with who? My 94 same green as yours just got dropped off the shop for a CC503 +1.6rr. How are you liking your cam?
@maldo72
3 жыл бұрын
the car has a slight tune when we did the headers a long time ago but yes it will need a proper tune which is coming up soon. .. love the cam perfect for what I need it for and stock heads it pulls hard past 3000 rpm but still has tons of torque down low for street driving. ... great cam
So I have a 95 Z28 with 97,000 original miles. How hard was it to get your headers on? And what gaskets did you use? I have some SLP loudmouth headers im going to straight pipe. Just want to know what im looking forward to.
@maldo72
3 жыл бұрын
headers were not bad to install used Mr gasket soft aluminum gaskets the best to use zero leaks and can be reused...
sooo glad to see it on roads👌🏼👌🏼, did you tune it when you put your cam in it? and where’d you get the cam from ? i’m rebuilding an lt1 and wanna see if i can just drop it in my camaro and drive it
@maldo72
3 жыл бұрын
Thx check out some of my older videos have a list of all the parts I used. The car has a slight tune but needs to be retuned one dyno
Am I going to need o2 extensions for my 1995? I’m putting the long tubes on but it’s gonna have to be a weekend thing since it’s a daily driver.
@maldo72
2 жыл бұрын
yes definitely need o2 extensions for long tubes
@sagemata5756
2 жыл бұрын
@@maldo72 I am sending the computer to be tuned but will removing the air pump/egr junk hurt anything before the tune? I already have check engine light so I’m not worried about it if it’s not causing a problem🤷🏻
@maldo72
2 жыл бұрын
@@sagemata5756 no it will not hurt anything you will just have a check engine light until its retuned
I see all of the cam specs but what other valvetrain components did you upgrade? (Please include links) also what headers do you have?
@maldo72
3 жыл бұрын
kzread.info/dash/bejne/oHZ8rZRrqpadkZM.html check out the video link it has the items i used. super cheap. This was a budget swap and wanted to show the cheapest way to do a cam and long tube header swap ... note : I re-used all locks and retainers for the new valve springs (which you can buy new if you don't want or reuse the old components mine were in good shape ) ... depending on the condition or miles your heads you also might want to consider new valve stem seals when you change the valve springs (i did not do that because these heads were redone and only had about a 1,000 miles on them when i did the cam)
I have the same exact car, even the same SS wheels. Still have the ugly tan Interior though lol. I'm thinking about dropping a cam in mine. Did you notice any drop in low end power? Any drivability issues? Just stumbled across your channel so I haven't watched any other videos yet. Just subbed and ill be checking them out.
@maldo72
2 жыл бұрын
Hi and thanks for watching ....... love the cam its a older design with slower ramp speeds on the lobes and under 600 lift (still running stock heads ) i pick this because it was cheap and it does not beat up the valve train plus I can get away with a single upgraded valve spring setup ..... it pulls hard to 6800 rpm (check out the new video i posted you can see the motor tacking out and pulling hard all the way to the top lol (and that's why i am currently redoing a motor as we speak (took out a bearing) just to get me by for the winter so i can mock up a rear turbo setup ..... but will be upgrading to a better short block mid spring.....
Sweet car man, I have an ls1 car these days but I miss my old lt1, just didn’t want the auto anymore lol You planning to take it to the track this season?
@maldo72
3 жыл бұрын
yes hopefully
Sounds great, it's coming together, are you running the same exhaust that is on the TA?
@maldo72
3 жыл бұрын
Yes borla with the cut out open
👍👍👍
Damn dude!! That sounds awesome! Where did get that SS hood?
@maldo72
3 жыл бұрын
Bought it years ago off of a wrecked ss
hey bro im having trouble with my 96Z :( when i start it it sounds like complete shit like Ticking or KNocking , I tried adjusting the valves which made it go away, but then came back. I do think coolant fell on the opti. But Im not sure if its that or something valvetrain related as a couple weeks ago, a RR came loose from the bolt, which was causing it to sound like shit too and misfire also. I also think I have a blown head gasket hahah. Do you think its better to just look on Offerup for a new engine or work on this one??? i was throwing off codes before this, P1371, now i seem to have developed P0300??? which means multiple misfire so i think thats why it sounds like that because of the opti.
@maldo72
3 жыл бұрын
send video to my Instagram "maldo72youtube" cant help unless i can hear it
@sergiocarmonajr7127
3 жыл бұрын
@@maldo72 hey bro i will send it tomorrow, thanks for responding! i’m really concerned it sounds so bad
@ztwntyn8
3 жыл бұрын
Check the distributor cap. The distributor bushing/bearing goes bad melts the area where the set screws are and throws off the timing. New optispark may be in your future.
It sounds so healthy. What's all done to it? I just picked up a 96 with a window in the block from a bad 383 build. I'm not going for insane power, I just want something Rev-happy and healthy like this
@maldo72
3 жыл бұрын
hi and thank you for watching a good cam and header combo really wakes up these lt1's from the factory they had really small cams ... if you are looking for a good daily street engine a good stock style engine with cam and heads goes a long way without breaking the bank ... check out some of my past videos to see what i did on this low budget build ...
@playstationRLZ
3 жыл бұрын
@@maldo72 thanks for the info man
I need to do some videos of mine if my wife will record lol
@maldo72
3 жыл бұрын
lol
Are those wheels off the 98-02 SS? They look bad as and man that exhaust sound is amazing! 👍👍
@maldo72
3 жыл бұрын
thank for watching and yes they off of a 99 ss
Hey the car is coming along nice I spoke with you a while back since you know these cars inside and out I was hoping u could help me out I have a 95 caprice t it came with the 4.3 but two owners ago the guy changed the motor I looked all over the block I found the numbers but I cant read them I can see gm 5.7 so I know uts the lt1 but no clue on the year of it and I'm dieing to order up the cam but I need the correct year furst any help would be greatly appreciated thanks
@maldo72
3 жыл бұрын
hit me up on Instagram maldo72youtube if you can send detailed pics of the engine .. also note your channel name
So is it a hoite custom cam or a comp cams XE cam? I like the sound of it and am looking to get one.
@maldo72
3 жыл бұрын
from what I gathered from the spec of the cam its a comp xe cam spec clone done by hoite cut for a lt1 engine.... at first I thought it would be a little to big for a stock head and cube motor but, found that it's fantastic great low end torque plus pulls hard till 6400 rpm and never feels like its nosing over. don't want to push the stock short block passed that rpm ... super happy with it and sounds great ..... as you can see from the video driving around part was smooth and no cam surge which i was surprised about note: this car has a slight tune on it which was based off the stock cam and headers but def needs to be tuned for the cam upgrade (super rich at idle etc) .....
@quintenbarker6620
3 жыл бұрын
@@maldo72 I had a rich idle problem with my 97 z28 after a comp cam swap. I had Solomon do a performance mail order tune. All issues were solved with that tune
@maldo72
3 жыл бұрын
@@quintenbarker6620 how do you like the tune from him?
What cam is this ?
@maldo72
6 ай бұрын
hi and thank you for watching if you scroll through the channel i have the cam i used for this setup .... its a small cam manufacture... but if your looking for anther setup cheap for a regrind check out Jon from delta cam he can get you out a cam quick or he can even regrind your stock cam if you wanted to save even more money.. or email me i can forward all the details
There's something visceral about the sound of these 23 degree small blocks the LS just doesn't get.
@maldo72
Жыл бұрын
tell me about it ... Small Block Chevy's have a different firing order Them a LS that's why you can tell the difference between the two without even looking at the car ..... small block chevy's to me sound better ...
Did you do any chip work or just the cam? #exitfour
@maldo72
3 жыл бұрын
IT HAS A SLIGHT TUNE BUT WILL HAVE TO RETUNED ON THE DYNO
What exhaust is that? That’s exactly how I want mine to sound.
@maldo72
7 ай бұрын
1 3/4 inch header with Borla 3inch system with no cats
Will the cam and turbo work on my ‘95 trans am LT1?
@maldo72
2 жыл бұрын
YES
@vettster89
2 жыл бұрын
That website you have the link for says this parts will not work on my 1995 Trans Am or a 1995 Camaro.
@maldo72
2 жыл бұрын
@@vettster89 do you mean the turbo ? because with any turbo system you would need to build a custom setup
Sounds damn good, how much did it cost to do the cam and headers?
@maldo72
3 жыл бұрын
Thank you for watching check out one of my older videos that goes into the full cost of this budget cam swap kzread.info/dash/bejne/oHZ8rZRrqpadkZM.html
Where in nj are you located? Any interest in doing a cam in my 97?
@maldo72
3 жыл бұрын
Sorry to busy ...
What’s the type of cam, I’m currently looking for one this week if you can help me with the brand type and part number…please and thanks
@maldo72
18 күн бұрын
Thank you for watching. This setup used a regrind cam i referenced the specs in my other videos If your looking for a new cam Iwould definitely contact Loyd Elliot first from eliottportworks. elliottsportworks.com/lt1-cam-info/ hes been doing Heads and Cams for well over 30 years and know the lt1 platform well.. Plus he can do custom grinds to fit your needs. Tell him i sent you...
Was this running on no tune? If so how was it?
@maldo72
7 ай бұрын
this car had a slight tune with the stock cam setup up from before never got around to retune it for new cam ...
How long have you had it? Bought my red 94 z28 new 🙂
@maldo72
Жыл бұрын
right around 7 years for this one ... the other car over 20 years
@callocam
Жыл бұрын
@@maldo72 with all of today's cars looking identical, I'm keeping mine!
@maldo72
Жыл бұрын
@@callocam exactly 💯
Other than the cam and header and exhaust is that all it has???
@maldo72
3 жыл бұрын
yup... valve springs rocker arms and a few special sauce items
Sweet. Maybe a future video you could post a dyno session and numbers for us? I am working on getting mine back together. I am going to go ahead and spring for the torqhead so i can run the LS PCM in order to eliminate the opti and have it dyno tuned. Had engine bored .030 over and got hooker super comp long tubes amd connectors, flowmaster exhaust, Lloyd Elliott ported intake and heads and LE also put in big Manley stainless valves and heavy springs. I got the car from a buddy who couldnt pay a $1500 debt!! Its a 25th anniversary white z28 with the black t tops and tremec 6 speed. Somehow the spun the cam bearings at only 85k miles. Cant wait to drive it. I will stay in touch!
@maldo72
2 жыл бұрын
Hi and thank you f thank you for following.. I was planning a dyno /tune session but the motor took a dump because I got a little too crazy one night and spun a main bearing (i think still have not pulled the motor ) from mis- shift where the motor saw close to 8000 rpm ... (too much for a stock bottom end setup ...) ... in the process of throwing together a junk engine to get me by while a full race engine is being built ... will update as soon as i can .... thx
Did your cam swap require you to tune the car?
@maldo72
3 жыл бұрын
thank you for watching .... Yes you are going to need a tune for max performance if not car will run pig rich ..... waiting for the weather to clear up to get a proper dyno tune .. but that said this car has a small tune from pcmforless.com prior when i did the headers and intake ... not ideal because the car still runs rich but its better then a stock tune would be.
What is the exhaust setup boy she sounds so good loving my green twin
@maldo72
3 жыл бұрын
thank you for watching using cheap ebay long tubes watch video here kzread.info/dash/bejne/ZmiWsbSpkqichco.html with Borla exhaust
@drakeherman16
3 жыл бұрын
@@maldo72 no cats? Single in dual out catback system?
@maldo72
3 жыл бұрын
@@drakeherman16 no cats borla exhaust
Do you have some kind of double din conversion?
@chrispulieri9543
Жыл бұрын
😮
@maldo72
Жыл бұрын
??
@coreysharp9794
10 ай бұрын
@@maldo72he means where the radio goes
@anthonylaudano9435
6 ай бұрын
@@maldo72I DON'T MEAN TO BE A JERK BUT I AM NOT A FAN OF THIS BODY STYLE CAMARO AND HONESTLY MY FAVORITE IS MY 92 ANIVERSREY CAMARO Z28 THAT I ORDERED NEW BACK IN 92 AND 19 THOUSAND ORIGINAL MILES LATER AND IT'S THE ONLY CHEVY IN MY 8 CAR COLLECTION LOL I KNOW MY Z28 ISN'T FAST BUT IN THE FUTURE I PLAN ON DOING SOME POWER AND DEFINITELY A FULL EXHAUST BUT IF I WANT TO GO REALLY FAST I HAVE A 850HP GT500 AND I HAVE 2 SUPER SNAKES AND I HAVE A 04 COBRA AND MY 93 COBRA AND OTHERS.
So at this time, it only has cam and headers?
@maldo72
2 ай бұрын
correct .. plus a borla exhaust
How are those headers holdin up?
@maldo72
Жыл бұрын
Fantastic zero problems fit was spot on I will be going over them in upcoming videos as the build goes on.... from what I can tell it looks like the same manufacturer makes them sold through retailers... Hard to find them in stock .... also look out they make a couple of versions of the same header on eBay 1) just the headers by themselves with no y pipe 2) headers with y-pipe if you can find them.. .... *_ what to look out for_* they make the same header one has fully welded all the way around the primary's which mine are and the other where it only has spot welds if you buy look closely at the pictures to see the difference...
@Touge_camaro
Жыл бұрын
@@maldo72 I have a 94 camaro z28 lt1, but it’s t5 swapped. I wanted to do long tubes on it but not sure if I can due to the t5 slave
What's the details on your car? I would like to replicate your set up. Except I want a corsa catback 😍 but it's so expensive 😭🥺😰.
@maldo72
3 жыл бұрын
check out my video on what was added to the car kzread.info/dash/bejne/oHZ8rZRrqpadkZM.html
@dnegel9546
3 жыл бұрын
@@maldo72 thanks.
Everyone says headers and y pipe sounds awful and really poppy is this true?
@maldo72
3 жыл бұрын
no not at all ... my car has headers and a y-pipe sounds fantastic and zero drone with the borla exhaust even with the cut-out open
@seshtilirest4748
3 жыл бұрын
I have long tubes, y pipe, and an slp loudmouth on my car and I love the sound. Mines on the stock cam though.
How did you tune it?
@maldo72
2 жыл бұрын
pcmforless.com
What cam is it in there
@maldo72
Жыл бұрын
Willhoite reground camshaft swap willhoites cams specs According to the cam card from this company, it uses a comp cam CS XR282HR-10 230/236 at .050 Maximum valve lift is .510-inch on the intake and .520 on the exhaust. It is ground on a 110 degree lobe separation angle. comp cam xr282hr
You do your own tuning?
@maldo72
Жыл бұрын
i run the data logs and send all my info to pcmforless.com for tuning
Sounds killer
@maldo72
Жыл бұрын
thanks but motor took a dump shortly after (spun a main bearing ) look at the new videos to see what happen
How much you pushing to the wheels?
@maldo72
3 жыл бұрын
not sure yet .. weather is bad over here and she is stuck in the garage .... as soon as the weather breaks off to the dyno for tuning
@daonewitdagun1062
3 жыл бұрын
@@maldo72 alright I'll check up on you. Im trying to build my lt1 to 450rwhp
How hot do the floorboards get with the long pipe headers?
@maldo72
2 ай бұрын
zero problems with heat they tuck nicely under the car
What are all of your mods?
@maldo72
3 жыл бұрын
are you looking for a detailed list of mods and parts used?
Is that a OEM SS hood?
@maldo72
3 жыл бұрын
Yes got it off of a wrecked ss years ago
What exhaust do you have
@maldo72
3 жыл бұрын
Borla 3inch exhaust
U have it tuned?
@maldo72
2 жыл бұрын
call up pcmforless.com these are the guys who did my car tell them i sent you ...
What cam you running
@maldo72
3 жыл бұрын
thanks for watching check out the video on the cam I am running kzread.info/dash/bejne/rJiryrmqidPMfs4.html