i had a 95 Z28 with the "GM 847" cam and lightly ported stock heads, full exhaust, that ran 12.6 @ 113. full weight too. such an underappreciated motor

I love the preface lift 4th gen, LT1s always sound so good too.

Love the content man, just bought a 95 white ttop z28 4 months ago and love it!

I'm definitely pulling that tuned by jp sticker off as soon as I pick my car up. Have a sticker ready to be installed

High lsa cam for Nitros good blower cam resonds to more air

Just subbed, picked up a ridiculously cheap 95 Z28, with 100k after maintenance, gonna get in contact for a part list and tune.

I'm so gonna have you tune my LE CAMMED LT1 bro. LE even recommended you for a tune.. I just need to upgrade the fuel system before I pull the trigger.

Could better performance be squeezed out of a bone stock lt1?

Not sure what it would have dynoed, but I went 92mph in the 1/8 on stock lt1 injectors back in the day. Mostly full weight. Cam and mild porting

So would the 36lb gtp injectors work in a stockish setup with just cai and exhaust? I have some on the shelf. Wondering if I should just put them in now car is 0411 swapped.

Were do you get the blank keys from. I need a door key 1995 z 28 Camaro LT1. Bought from auction. No door key.

What is a good cam for an lt1 to achieve about 350 hp

Im put all that in a 85 square body Chevy truck with a 12 bolt podsie rareend

I have a 1985 LT1 and I was thinking going with voodoo cam but Im not sure what size cam I wanna to do with It and LT1 pistons like 10.01 or 10.11 can you give some kinda ideal it would be best I'm looking im look to make 500 to 900 hours power out of my lT1 this for a show truck with 6.71 super charger maybe not sure yet about the super charger

@rodneyjohnson4438

2 ай бұрын

If I do a super charger I was thinking about running a 650 eleblock carburetor

I’m jealous

i thought you had to burn roms for these ecu's...or do they do a obd2 conversion ? my buddy had a lt1 with lt4 top end heads and intake cam..it ran like a sob..the 700r4 had some issues.

@axemana

2 ай бұрын

​@@joemomma8905The 93's required a chip. The 94-95's are OBD1. The 96-97 are OBD2.

@joemomma8905

2 ай бұрын

​@@axemana 93 and earlier are OBD1 that require a chip, 94&95 are a different type of OBD1 they are muh easier to tune more like OBD2..If you have a 93 camaro or trans am its easier to tune if you get the computer and wiring harness from a 94/95 car...

How do we buy your injectors?

@strongspeedworks

Ай бұрын

My email is Strongspeedworks@hotmail.com Send me an email

What size are the wheels and tires ?

@strongspeedworks

3 ай бұрын

Stock

Accel 32 lbs or 36 lbs for heads cam car ?

@strongspeedworks

3 ай бұрын

Blue Demon 36’s

How much do you charge to tune

@strongspeedworks

3 ай бұрын

It varies.

was it 0411 pcm? or i’m only like 4 min in

@strongspeedworks

3 ай бұрын

Keep watching

Tune my Camaro 😭

@strongspeedworks

3 ай бұрын

Contact me.

My tuner says he needs an adapter for my 93’ camaro to plug it into his computer, do you know what he needs ? Do you have an email? He has hp tuner , its Nix Garage in Klamath Falls , Oregon.

@strongspeedworks

2 ай бұрын

If your tuner thinks he can tune a 93 pcm with hp tuners, find another tuner.

@hempfarmerclay4184

2 ай бұрын

He doesn’t think so , i told him i was gonna ask you , what can he use to tune it ?

@strongspeedworks

2 ай бұрын

A chip burner and blank chips.

@hempfarmerclay4184

2 ай бұрын

That there makes me wanna put it up for sale, or ls swap☠️ dyno at 403 hp , llyod elliot head /cam /intake etc.. im stuck with a bs pcmforless tune☠️☠️☠️

Iac

Hey man I’m running afr 195cc-54cc heads with a trick flow TFS-31402081 cam and I want to put the 36lb blue Deamon injectors what specifically would I need to tune to get the car right I’m new to running and know nothing lol would be appreciated 💪 also if you got a link I could buy the injectors threw you lmk thx

Where can good GM injector data be found for the Deka 60’s for the LT1 tables? Seems like there is some HP tuner data out there, but LT injector tables are different. Hp tuners references vacuum in their voltage offset tables. Any answers?

@strongspeedworks

3 ай бұрын

The universal data. You need to enter it yourself.

@dickbrugh5562

3 ай бұрын

@@strongspeedworks Thank you.