A complete disassembly of the Walksnail Avatar HD Goggles X.
Жүктеу.....
Пікірлер: 22
@Painless3602 ай бұрын
Very nicely done! Happy flying!
@FG-Supercharged2 ай бұрын
I'm going to call this "The definitive guide to Caddx Walksnail Avatar HD Goggles X Disassembly". Well done, mate!
@yawesomeyoutube
2 ай бұрын
Ha! Thanks!!
@VincentFPV2 ай бұрын
I can't like this video enough! :D Great job!
@visioneerone3 ай бұрын
I have an upgraded fan to install into my goggles... just been waiting for someone to drop a proper teardown video to show me what I'm in for. Yay! (ugh)
@wtfmimshag2 ай бұрын
Any idea what the USB port on the RF board is for? Im tempted to try and tap some voltage from it for an arduino head tracker....
@stonesrcchannel3 ай бұрын
Great video for reference thanks for making it!
@skysi2 ай бұрын
the cooling also seems lacking for eyes, its only that little bottom fan that sucks the air through the wents into the googles and out of the bottom or?
@x13102543Ай бұрын
May I know those fans detail? Maybe I can replace and found a better to solve overheat problem after replace heatsink plate.
@Mayday.Aerial3 ай бұрын
to watch this or pay attention on this conference call....I think you know the answer :P
@deadstickfpvАй бұрын
Oke.. so now we know what's going on with these goggles.. my issues are.. the fog up.. I usually get only 1 green channel the rest is usually all orange. Sometime times wierd collared stripes on my screen when booting up.. I think I'm going to ship my goggles back to walksnail for repair.. only 4 mounth old.
@PritishPalАй бұрын
My walksnail goggles x screent turn black 😢 please help me
@salt4yapepper
14 күн бұрын
I've had a similar problem have you solved this ?
@PritishPal
14 күн бұрын
@@salt4yapepper yes i upgrade heatsink plate and apply thin layer of thermal past if you apply thick layer of thermal past then problem don't fixed. Applied thin layer of thermal past and upgraded heatsink plate problem will be fixed.
@salt4yapepper
14 күн бұрын
@@PritishPal just added mine and has made no difference :/
@swabby9132 ай бұрын
Just got mine and the little exhaust fan is making noise like a wire or soemthingnis touching it. So pissed. Definitely sending back. Not worth disassembly effort for brand new goggles.
@yawesomeyoutube
2 ай бұрын
Ah man! That’s unfortunate!! Send them an email. Joe Sivis is pretty good with getting back and taking care of you.
@swabby913
2 ай бұрын
@@yawesomeyoutube yea ill do that. Didn't buy from them direct but ill see what they say. Honestly I'm going to mod them anyway at some point. Probably need to do something with the cooling regardless. They seem worth it if the support and innovation continues forward. Promising tech
@swabby913
2 ай бұрын
@@yawesomeyoutube I can't even find an email for caddx. Forget a phone number... Do you have any contacts for them? So annoying
@swabby913
2 ай бұрын
Quick update, for anyone who might see this and be turned off from promising new tech outside of the evil DJI CORP. lol. My goggles are getting replaced and apparently the new heatsink will be pre installed along with latest firmware. So that's a good sign from Caddx. I'm willing to be patient since this is new tech and offered at such a reasonable price. Cheers
@salt4yapepper
14 күн бұрын
@swabby913 sorry do you mind me asking what email adress you use to correspond with caddex. I've got a black screen after replacing my bottom left antenna port.
Пікірлер: 22
Very nicely done! Happy flying!
I'm going to call this "The definitive guide to Caddx Walksnail Avatar HD Goggles X Disassembly". Well done, mate!
@yawesomeyoutube
2 ай бұрын
Ha! Thanks!!
I can't like this video enough! :D Great job!
I have an upgraded fan to install into my goggles... just been waiting for someone to drop a proper teardown video to show me what I'm in for. Yay! (ugh)
Any idea what the USB port on the RF board is for? Im tempted to try and tap some voltage from it for an arduino head tracker....
Great video for reference thanks for making it!
the cooling also seems lacking for eyes, its only that little bottom fan that sucks the air through the wents into the googles and out of the bottom or?
May I know those fans detail? Maybe I can replace and found a better to solve overheat problem after replace heatsink plate.
to watch this or pay attention on this conference call....I think you know the answer :P
Oke.. so now we know what's going on with these goggles.. my issues are.. the fog up.. I usually get only 1 green channel the rest is usually all orange. Sometime times wierd collared stripes on my screen when booting up.. I think I'm going to ship my goggles back to walksnail for repair.. only 4 mounth old.
My walksnail goggles x screent turn black 😢 please help me
@salt4yapepper
14 күн бұрын
I've had a similar problem have you solved this ?
@PritishPal
14 күн бұрын
@@salt4yapepper yes i upgrade heatsink plate and apply thin layer of thermal past if you apply thick layer of thermal past then problem don't fixed. Applied thin layer of thermal past and upgraded heatsink plate problem will be fixed.
@salt4yapepper
14 күн бұрын
@@PritishPal just added mine and has made no difference :/
Just got mine and the little exhaust fan is making noise like a wire or soemthingnis touching it. So pissed. Definitely sending back. Not worth disassembly effort for brand new goggles.
@yawesomeyoutube
2 ай бұрын
Ah man! That’s unfortunate!! Send them an email. Joe Sivis is pretty good with getting back and taking care of you.
@swabby913
2 ай бұрын
@@yawesomeyoutube yea ill do that. Didn't buy from them direct but ill see what they say. Honestly I'm going to mod them anyway at some point. Probably need to do something with the cooling regardless. They seem worth it if the support and innovation continues forward. Promising tech
@swabby913
2 ай бұрын
@@yawesomeyoutube I can't even find an email for caddx. Forget a phone number... Do you have any contacts for them? So annoying
@swabby913
2 ай бұрын
Quick update, for anyone who might see this and be turned off from promising new tech outside of the evil DJI CORP. lol. My goggles are getting replaced and apparently the new heatsink will be pre installed along with latest firmware. So that's a good sign from Caddx. I'm willing to be patient since this is new tech and offered at such a reasonable price. Cheers
@salt4yapepper
14 күн бұрын
@swabby913 sorry do you mind me asking what email adress you use to correspond with caddex. I've got a black screen after replacing my bottom left antenna port.