🕷🕷🕷 We haven't done a GIVEAWAY for a while... First person to find the THIRD SPIDER in this video and send us the timestamp gets a $20 O'Reilly Auto Parts gift card and some UTX stickers! 😁😁

@jonvasquez4729

8 ай бұрын

Ok. Watched the video on a bigger screen than my phone, counted spiders…1)6:08 spider on Emily’s jeans. 2)15:27 tiny spider hanging from a single strand on the right rear bumper. 3)16:21 tiny spider in a small web at rear left front wheel well. 4)16:29 a little bit bigger spider in another web, front side of left front wheel well. 5)25:00 bigger spider in hood insulation. How did I do?

@UglyTruckExperience

8 ай бұрын

Oh man, you really are committed! You found spiders we didn't even know about! 😆 Someone else found #3 this morning... Check out 1:02:26 on the orange wire crimpers! 🕷 I'm working on some new UTX swag, and I'll be sure to send you one for your exceptional spider hunting skills! Thanks for playing, Jon! This was fun! --Emily

@jonvasquez4729

8 ай бұрын

I missed that one… I’m useless. Thanks for the great builds

Your Soooooo Blessed to have This Lady Working You” Without her’ You would be Lost & No work would get Done..😄

@UglyTruckExperience

8 ай бұрын

You are correct Bernando. She is the best. Absolutely couldn't do any of this without her. Thanks. Jerry

@bernandoturner4840

8 ай бұрын

@@UglyTruckExperience 😂😅😂

Great Videos, I kind of watch in the shop while I'm working on my projects. Then when I'm done I have to go in the house and watch again so I can absorb all that information. So I watch each video at least twice. Thanks🙂

@UglyTruckExperience

8 ай бұрын

Thanks GTO! We appreciate you watching our stuff!! 👍 --Jerry and Emily

Clean parts with old gas. Thanks for sharing.

@UglyTruckExperience

8 ай бұрын

Thanks Sam! We appreciate you watching! --Emily and Jerry

What a bummer.thanks guys

@UglyTruckExperience

8 ай бұрын

It wasn't the outcome we were hoping for, but the fuel system and cooling system are set up and ready for the LS. 👍👍 Thanks Greg! We appreciate you tuning in!

Yes! I needed some UTX today!

@UglyTruckExperience

8 ай бұрын

We're here for you! 😆 Thanks Mooney! --Emily and Jerry

Awesome video guys!! like the earlier comments I liked everything about it until the very end, but you guys made the best of it and turned it to a positive I so appreciate everything you did on it and everything you did was to perfection, who would have known🤷‍♂️ I’m so excited for the upcoming LS swap and your gen 4 ideas. But until then, maybe I can work on some of the other issues on the Blazer!

@UglyTruckExperience

8 ай бұрын

Thanks Jeff. We loved working on it. It will end up being a great Blazer. Jerry and Emily

Great video!!

@UglyTruckExperience

8 ай бұрын

Thanks Trent!!

Great video. Rotten gas ? Mix it with the old motor oil and burn it in your garage heater during the winter. Everything goes thru mine including mineral spirits and contaminated reducer from cleaning my paint guns. I'll be watching the SL swap, shouldn't be to bad with the fuel system in place.

@UglyTruckExperience

8 ай бұрын

Hello Ken. If it isn't to bad, I run it through a 72 c10 that I drive to use it up. The 350 that is in it seems to run on anything I throw at it. I have had some fuel run through the waste heater and it made us a bit nervous. Been thinking of a way to mix the oil while it is waiting to be burnt so it is not separated so bad. Jerry

Great cause I am doing an Ls3/4L80 or a 6L80 swap. I Havnt decided on the trans yet. Going in a 03'Crown Vic Police Interceptor. I can Def use the videos with the Gen 4 stuff. Great video as always.

@UglyTruckExperience

8 ай бұрын

Thanks Hugh! We're looking forward to the Gen 4 stuff too!

Don't worry bout bolting that puppy down. The vacuum lines will keep it off the exhaust manifolds lol.

@UglyTruckExperience

8 ай бұрын

🤣🤣 No kidding!

Please replace the hood insulation. It's been driving me nuts! 😜😜 Love your videos. I'm looking forward to the 6.0 swap + 4L80? , 4L60?

@UglyTruckExperience

8 ай бұрын

Hey Randy. I didn't even notice that. I am going to have to go watch it now and pay attention. It will be fixed!! Rest assured. Thanks. Jerry and Emily

great video until the "other people's project gremlin"showed it's ugly head!!Man I've been there my brother and I once installed a 350 in my cousins truck that ran great until we went to top up the anti-freeze and it came up the oil dipstick because someone had left water in the block and it had froze and left a 2"by 4" hole behind the push rods.I'm glad you got the EFI working my nephew has that system on his 78 Z28 on top of a 455 Oldsmobile and it works great.looking forward to the Gen4 swap Karl from eastern Canada

@UglyTruckExperience

8 ай бұрын

Thanks Karl. I really didn't expect this one to go the way it did. I would love to know the real story on this project. We bought Emily's 70 c10 that was sold to us as a running truck. It ended up having a hole rusted through the cylinder wall to the cooling jacket. Olds 455. Nice!!! Thanks for tuning in. Jerry

good afternoon

@UglyTruckExperience

8 ай бұрын

Hi Alonso! 👋👋

Can you post a link to the cinch clamps you guys use for the fuel lines. Im second guessing myself on these pex clamps. Great videos guys. Definitely liking and subscribing.

@UglyTruckExperience

6 ай бұрын

Thanks Jesus! Here's a link to the clamps we use, but we've used the Pex clamps from Lowe's too. These are available in more sizes than you'll find at a hardware store. amzn.to/3UdnQeD We appreciate you watching our stuff! --Emily and Jerry

If no one has asked for it… I’d be willing to buy that Edelbrock manifold and FiTech from you. I have this very year K5 and have been wanting to upgrade the fuel system for better running rig and couple extra ponies.

@UglyTruckExperience

2 ай бұрын

Hey Geebob! We need to keep the FiTech, but we'll be tearing into this engine soon and we'll make you a smokin' deal on the intake! Send us an email at uglytruckexperience@gmail.com and we'll work it out. Thanks for tuning in! --Emily and Jerry

@geebobwiz

2 ай бұрын

@@UglyTruckExperience will do

Got it 1:06.20. On the orange and black handle crimpers.

@UglyTruckExperience

8 ай бұрын

DING DING DING! WE HAVE A WINNER! Good eye, Hugh! Send me an email with your address uglytruckexperience@gmail.com and I'll put your stickers and gift card in the mail. Thanks for playing!!! --Emily

@GrandPitoVic

8 ай бұрын

Thank you guys. That was interesting!!!

After dealing with stuff going out or breaking days after the warranty went out I buy extended warranty always now lol.

@UglyTruckExperience

8 ай бұрын

It's crazy how they time it to fail like that! The power supply on my editing computer lasted FOUR DAYS past warranty!!! 😒 Thanks for tuning in, Hugh! --Emily

Was really hoping it would be ok but after all the other crappy work I kind of figured that motor was shot also

@UglyTruckExperience

8 ай бұрын

Hey Bobby. WE were hoping too. I can't wait to tear this engine apart someday for fun and see what is going on in there. We got down to the end of this and at least found out that the fuel system is working properly again. So it wasn't all bad. Thanks for watching. Jerry and Emily

I heard Jerry say to make sure the in tank fuel pump hose is submersible rated, but do we know if the heat shrink and solder stick butt connector are ok to be submersed? I’ve never thought about that before.

@UglyTruckExperience

8 ай бұрын

They're both supposed to be ok for fuel, and we've never had any issues... So don't jinx it!! 😆 Thanks for tuning in, Jon! --Emily and Jerry

@UglyTruckExperience

8 ай бұрын

On a side note, I would not use it in high ethanol fuel. Good question. I should probably mention that at some point. Thanks Jon. Jerry

@treborjm87

8 ай бұрын

I had that same thought about the heat shrink tubing. I recently bought some cheap AutoZone (Dorman brand, I think) that completely disintegrated in less than a month. Lesson learned… get the good stuff!

Awesomeness as usual! What kind of butt connectors do you use? Where can i find them?

@UglyTruckExperience

8 ай бұрын

Lol, you said butt... 🤣🤣 Thanks Chad! Here's a link to the solder butt connectors we use. They're on Amazon. amzn.to/3ucf45B Thanks for tuning in! --Emily

@Chevrolet1994

8 ай бұрын

Thank you!

I was sad for this 350 over heating , but you are L S swapping it, so, ok🙃… will you have to re-wire the next engine or since it is already wired, plug and play ??

@UglyTruckExperience

8 ай бұрын

On this one we will try to have as much as the wiring done as possible. Will do the fuse box and end up doing the last couple wire and hopefully be done. Jerry

Watched 2x, never saw a third spider. The black critter crawling on the ground (next to one of the shop inspectors) was a beetle. Also, does the blue bug say TDI VW? I must know more…

@UglyTruckExperience

8 ай бұрын

😆 I appreciate your commitment! I promise it wasn't just a ploy for extra watch time! 😁 The plate on the Bug says TOY VW. It's still the original 1600?cc and factory Hurst shifter. JBugs just dropped off some packages this week, so you may be seeing it again soon! --Emily

Wondering if ya"ll got the gifts.

@UglyTruckExperience

3 ай бұрын

We did! They're awesome!!! Thank you so much! Keep an eye out for a new video in the next couple of days! 😁 Thanks again, Bobby! --Emily, Jerry, Ripley, and Juice

@bobbysanders6231

3 ай бұрын

@@UglyTruckExperience I'm so glad that ya"ll like everything..

25.03 ?

@UglyTruckExperience

8 ай бұрын

That's the second spider... We didn't even notice the third one until I was editing! --Emily

so nice to see your hair getting long again...

@UglyTruckExperience

8 ай бұрын

Thanks Lyncht1967. Your probably commenting to Emily, but I also grow my hair out in the winter and take any complement I can get. 😁😁 Thanks for watching. We appreciate it. Jerry