Well, we're definitely cooking!

lets goo your getting to the building part cant wait for the final product

If you have issues molding the foam an alternative could be using a CNC hot wire cutter to cut blocks of solid foam

PU is basically a glue, the mould release is absolutely required. You will also need to add a draft angle in order to get a part out of a solid mould. Alternative is to first make a silicone mould which is easier to remove. I am an embedded software developer with 20 years experience with C, C++ and python from Belgium, with an educational background in electronics. I'm willing to help with any low level software questions you might have.

For your printer that looks like under extension caused by a cooked PTFE tube in the hotend. Chances are the end of the tube inside the general where it contacts the nozzle has been over heated and now it's pinching the filament preventing smooth and consistent under extrusion because the extruder can't push it through the blockage... that's what the clicking is.

Why don't you use an off the shelf flight controller to start with? A Speedybee F405 Wing would do the job along with iNav or Ardupilot.

@NaeviusUAV

20 күн бұрын

For the first prototypes we definitely will

deliver pizza slices to war torn countries with this one simple trick!

🥴🥴🤌🤌🤌🤌 The intro

I WAS HERE

Hey, I filled out the form, when will I know whether I'm in or not? Just a friendly reminder, if You're busy it's np

You could just 3d print the whole plane. Check out eclipson.

@chevansrocketry4989

20 күн бұрын

i second this

@duckindustries526

20 күн бұрын

Wouldn't it be heavy tho? if it'd indeed be built with only a single electric motor, The motor would need to be ridiculously powerful. Also, it'd probably take more time and be more expensive. Edit: Don't want to hate tho.

@chevansrocketry4989

19 күн бұрын

@@duckindustries526 surprisingly no! Especially if you use light weight PLA it will be pretty light but still very strong if built correctly. And much easier to make than casting foam even if it needs a bit more power

@duckindustries526

19 күн бұрын

@@chevansrocketry4989 Yeah, you're right, but it'd still be more expensive

@chevansrocketry4989

19 күн бұрын

@@duckindustries526 it really depends on what you use for it and how long you want it to last

Hey, have you heard about the story of TGV? Basically, france wanted fast trains, but they realized that many similar trains failed just because of the public. So when they were making the TGV, they hired a guy who made the entire sleek, modern (for its time) design, colours, interior and stuff. Would you like somebody like that? Because I know a lot about paint, colours, contrast and stuff. I also get good technical ideas (sometimes) And I'd love to be a part of your team.

@duckindustries526

21 күн бұрын

I was thinking, and also, I could clarify sketches from ur team for the vid, focus on paints, coating that doesn't break in air, in water, upon landing on a branch. I have lots of free time. I know I'm not even close to a NASA intern.

@NaeviusUAV

20 күн бұрын

Hey man, that’s definitely going to come in handy at some point! If you want to apply you can find the link in the description :)

@duckindustries526

20 күн бұрын

Alr, thxxx