Building a Two-Stroke Race Replica Aprilia RS 125 Old Body New Chassis Conversion
Автокөліктер мен көлік құралдары
In this series i'll be attempting to transplant the best bits of Aprilia's 2002 model RS 125 into the frame of a 2008 two stroke RS125. In doing so i'll be upgrading most of its chassis and components to give a true Aprilia RS 125 race look from the 90's and early 2000's. This Aprilia RS 125 will be fully rebuilt and restored from the ground up so make sure you subscribe and check out my other project videos.
#apriliars125 #twostroke #motorcycleproject
Пікірлер: 102
I'm 15 years old and i will be buying my first bike some time next year,and it will likely be the Aprillia RS 125.I will most likely be doing a build on it so these videos are highly informative and helpful to someone that hasn't owned a bike before,keep it up!
You still building this bike ? Part 2.? 👍
I am the owner of RS125. I deeply respect your efforts!
Love these videos you do of the RS125 rebuilds. Iv just finished the restoration of a 1999 and these videos remind me of the challenges I faced throughout the my build. Can’t wait to see this come together. Keep up the great work!
Love those rebuilds! 👍
Awesome can’t wait to see the next update on this build 🙏🏻🙏🏻 I’m going to be buying one soon looking for an 09-12 model can’t wait 😊😊😊
Excellent choice :-) Just finished my Biaggi Replica
Super anschaulich erklärt ich Starte auch bald ein RS 125 Extrema Projekt💪
So chuffed to have found your channel as I'm doing pretty much the same thing. Look forward to seeing the progress!
@letsreviewit8925
3 жыл бұрын
Laurence Borg cheers for watching mate this is going to be a special build
@iqwanmauladhaniqwan4892
3 жыл бұрын
2012
Great video mate
Great video
Can't wait for the next video!
@letsreviewit8925
3 жыл бұрын
Will be about a week I expect make sure you're subscribed :)
@2strokerides
3 жыл бұрын
@@letsreviewit8925 didn't know a week takes about 6months :)
Great video 👌
Happy Birthday!
Well done
Great video. I have just purchased a 2000 myself for a restoration project. Similar condition to yours and it has been stored for 11 years. Looking forward to seeing your progress. Thank you 👍
@letsreviewit8925
3 жыл бұрын
Phil Fisher cheers for watching Phil they’re good fun to work on
@philfisher2223
3 жыл бұрын
@@letsreviewit8925 I've worked on a few bikes upto now but this is my first 2 stroke. Looking forward to it. Thanks for the reply. 👍
i really enjoyed this nice content mate! now i like to jump in my garage to build my own project! Have a good one buddy
@letsreviewit8925
3 жыл бұрын
AeroR thanks for watching
@iqwanmauladhaniqwan4892
3 жыл бұрын
2013
I take my hat off to you sir, well done. Any upcoming videos?
Part way through a 2005 rs125, spent a lot of time polishing the frame and swinging arm
@letsreviewit8925
3 жыл бұрын
Good luck with the build mate
@iqwanmauladhaniqwan4892
3 жыл бұрын
2014
New sub here,great to watch👍👍
Well done mate great one 👍 Ps what took you so long only joking 😂😂😂 Looking forward to this Ben 👍
Just went through all these build videos and they're great! Where'd you go? Hope all is well.
Using a torque wrench as a breaker bar made me wince.
A good combination is a old shape front end plastics with a new shape tail and tank.
Maximum pleasure Guaranteed
Checking this channel everyday to see if there’s any new videos of the RS125 up I’ve already watched every Rs video on Ytube need some new ones ASAP😂💯
@letsreviewit8925
3 жыл бұрын
They’re coming matey stick around
@minimoto123ful
3 жыл бұрын
@@letsreviewit8925 I will be can’t wait for the new video last build you did turned out perfect can’t wait to get mine finished
We want the part 2!
If you're ever considering picking up a new project bike, then I think you should do a cagiva mito one.
Any further progress? Keen to see what's happening
Actually both seem quite restorable to me. The blue one seems to be a talmacsi replica. So restore both :-)
Did you buy the Blue one from Peterborough by any chance? Im loving my RS, fitted a 140cc kit and 34mm carb and just this morning a new clutch as the old one was beggining to slip a touch. I never saw myself as a bike mechanic :) As far as i know, the latter model CDI's are different, from the clocks the Blue one is a Euro 3 bike. This means its the most restricted RS they did, 2 cats in the Expansion Chamber and to derestrict it if it isnt it needs drilling in the small recess at the top left if i remember right. I use a 50p coin for the clutch caps :)
@letsreviewit8925
3 жыл бұрын
boneav83 it did come from Peterborough yes 👌🏻
@boneav83
3 жыл бұрын
@@letsreviewit8925 It was just 2 minutes down the road from me, i saw it on Ebay a while ago and was so close to buying it. Im glad its gone to a good home :)
How is it coming along?
Hiya Is there a part two on this build ?
Rad u pulled off is alloy.. one of those double depth race rads you want
@twistedtransistor3532
3 жыл бұрын
Must say I'm loving the vids
@iqwanmauladhaniqwan4892
3 жыл бұрын
2017
The new rim look nice. What rim is that
Where do you send the engine to i am looking for someone to do a 123 rotax
Whats the progress? Been afew months! Ive got a 2001 which I'm restoring, nut and bolt rebuild!
Hi, thanks for sharing your journey, Can you tell the website on which you get all these furniture? Thanks keep going
@letsreviewit8925
3 жыл бұрын
Hi Antoine they come from all different sites, which parts are you specifically referring to?
@iqwanmauladhaniqwan4892
3 жыл бұрын
2016
Are you still building this bike? Havent seen any updates!
Love theses vids, can I ask, do you have your personal 125?
@letsreviewit8925
2 жыл бұрын
I'm working on the next one now one day i'll keep one lol
@TheDromen69
2 жыл бұрын
@@letsreviewit8925 very lovely bike, I hope so 👍🏿👍🏿
Nice one looking forward to the updates. Forged or carbon wheels?
@letsreviewit8925
3 жыл бұрын
Essex Hognose no too expensive haha
@iqwanmauladhaniqwan4892
3 жыл бұрын
2015 .
Great video, where did you get the race rear end fairing from?
@letsreviewit8925
3 жыл бұрын
Jordan shaw comes from a composite company in Italy text this guy Bert +39 349 871 6114 he’s really good and did it in 2 weeks
@MrJord2483
3 жыл бұрын
Are they expensive, with shipping etc?
@letsreviewit8925
3 жыл бұрын
£110 I think mate
when is your second rs 125 project expected to start?
Any new updates on this project??
so is the other bike a rotax 123?? i have hears they don’t fit in newer frames but don’t know for sure. there are subtle differences with older and new frames and parts are harder to get for older models who is building your engine ?
@letsreviewit8925
3 жыл бұрын
They're both 122's so there are no issues there, a good friend of mine is building the engine he's an ex 2T GP rider and old fart to boot but he knows smokers.
@gtisid
3 жыл бұрын
Lets Review It corsa black is paint code 95-98 then changed to diablo black R and S motorcycle paints have it
@letsreviewit8925
3 жыл бұрын
Whats corsa black? I’m confused?
@gtisid
3 жыл бұрын
Lets Review It the name of the colour for “chesterfield “black aprilia rs125, took me an age to find that out, so thought i’d share it with you.
@letsreviewit8925
3 жыл бұрын
Ah sorry got ya thank you, I was just getting a painter to colour match to be honest
Any updates?
2019
Where'd you go ?
@letsreviewit8925
2 жыл бұрын
We're back!
Where’s this guy gone ?
Where are you guys? You haven’t released a video in ages?
What company are you sending your engine off to?
@letsreviewit8925
3 жыл бұрын
I know an ex GP rider who is a 2T nut
@iqwanmauladhaniqwan4892
3 жыл бұрын
2018
Part 2. ?
Where you gone
update ?? :)
Where have the new uploads Gone? Has he quit?
Doing the same, restoring a a basket case...only it’s a 2009 yzf 125 that spent 11 years at the seaside so has been eaten alive by the salt.
@letsreviewit8925
3 жыл бұрын
Mark D salt is a nightmare on fixings mate
@03mdhillug
3 жыл бұрын
The state of the clip ons, chain and shock were horrific.
@letsreviewit8925
3 жыл бұрын
The RSV1000R I did was from Cornwall it had rust in places that weren’t metal haha
Part 2 ?
@letsreviewit8925
2 жыл бұрын
Is online now
What happened to the build?
@letsreviewit8925
2 жыл бұрын
Back up and running!
@riderzinc
2 жыл бұрын
@@letsreviewit8925 Need an update video 👍
hi there bro! nice rebuild. but i just want to know where u purchase all the accessories especially the single seat? Im very interested! and hi from singapore! 🇸🇬 i own one too do check up my video
@letsreviewit8925
3 жыл бұрын
Aaafiiqqq they come from various suppliers, the seat came from Holland actually I’ll dig out their contact details
@letsreviewit8925
3 жыл бұрын
Seat came from Italy sorry text this guy Bert he makes them and they’re good quality +39 349 871 6114
You buy bike lift....