Thank you pochi. Its sounds sweet straight out of the box.

even the frame of that bike is beautiful

@PochiRS

3 жыл бұрын

Thanks!

Beautiful! :)

@PochiRS

6 жыл бұрын

Thanks!

Hi Pochi, many thanks, I'm glad you finally received your BC's 144 cc cylinder. I hope you will enjoy it, at full throttle! :D

@PochiRS

6 жыл бұрын

It's thanks to you. I want to ride on my aprilia of the new cylinder as soon as possible. But Unfortunately, the rainy season will soon come to Japan.

@msrx08

6 жыл бұрын

I can understand you. This summer is yet not come here, it rains all day, incredible!

@PochiRS

6 жыл бұрын

I may be able to ride on the RS if it is sunny after the second week. I hope the weather is clear.

@msrx08

6 жыл бұрын

Let's cross the fingers! :-D

@msrx08

6 жыл бұрын

And have a test in the Dyno. ;-)

Nice Circlip tool👍 and doing your sqish nice

@PochiRS

4 жыл бұрын

I use the tool very conveniently because I am clumsy

wow good

When changing to a bigger bore you need also change the exhaustpipe, otherwise no gain in power, but the opposite. At least when talking about the RSA Racing of 2007

So beautiful

@PochiRS

6 жыл бұрын

Thanks!

Hi Pochi, where do you find this tool to install the clip in the piston? Great tool! Greetings from Belgium! :)

@dan190285

6 жыл бұрын

Robyn Racing I also would like to know

@PochiRS

6 жыл бұрын

You can buy it on ebay.

@alanmuscat59

6 жыл бұрын

Dan King is after your special oil pochi be careful😂

@dan190285

6 жыл бұрын

tiggz rs motovlog 😂😂

@alanmuscat59

6 жыл бұрын

Actually we all want your special oil pochi. No seriously we really do

What is the BLADE for rave2 for? Will my mk1 rs125 chesterfield 98 model require this part if i go for the 140cc bc kit?

@PochiRS

3 жыл бұрын

Why not find out about exhaust valves on 2 stroke engines?

I had a italkit 140cc before. Now a polini 154cc. Cant really tell what is best.

@PochiRS

6 жыл бұрын

Conversely, Both of them may be best.

@bravo1412

5 жыл бұрын

the Polini peaks @ 10000 rpm, the italkit 11000+. the polini brings more torque at low rpm´s. the max output is with a sport or racing reso pott like jolly moto by italkit! The Polini is not made for higher rpm than 10000! by EX timings!! But if you lucky polini has made a perfect fit reso pipe for the 154cc kit. I have one of this reso pips. The Reso is lowerd to arround 10000 rpm peak and in 6 gear max rpm is 10200-10500 max so you need 17 gear than 16 for more topspeed. The Italkit with jolly pipe 34 dellorto can do 35-37HP @11-11500rpm. the polini with his 154cc pipe and 34 dellorto does also a 37hp but at 10000 rpm. The polini reso pipe has the nr 4257 and a warning NOT FOR ROAD USE, USO ESCLUSIVO SU PISTA, RESERVE A LA COMPERTITION. i have the pipe since 1999, also the 154cc kit. 4 new pistons and the same zylinder. 40000km+ an the engins still goes strong

@mopedlyfe2288

5 жыл бұрын

@@bravo1412 I didn't have that luck, my 154 broke down the first day due to the last owner not knowing how to set the carb up. I'm planning on rebuilding the cylinder but am hesitant because they are not as reliable as the others. Any tips for making it more reliable

That music tho 😂

which detonation counter are you using and which system to record the data?

@PochiRS

6 жыл бұрын

The detonation counter is a model that I sold in Japan but it has already been sold out. It can not leave a data log. Therefore, I check by recording with a video camera.

Top speed on 144cc?

What oil did you bake the piston with? Is it homemade or did you buy it?

@PochiRS

2 жыл бұрын

There are oils on the market which, when superheated, form a film. It is unknown if it actually works.

Did you noticed any differences from Italkit to BC 140? Worth the price difference?

@PochiRS

3 жыл бұрын

It is difficult to answer that question. But I don't think it makes much difference.

Which is the best cylinder between italkit 140, mitaka 140, bc engineering 140 and charmo 144? (in terms of performance and reliability)

@PochiRS

4 жыл бұрын

Honestly i don't understand So I wonder which one you can buy

@danielevaldemarin3276

4 жыл бұрын

@@PochiRS which is the best between those cylinders?

Hi Pochi, I have a problem with Aprilia RS125cc with Rotax 122, cylinder italkit 140cc, piston model vertex. After 2 3 hours race pace the piston dents. Can you send me a brake-in procedure or give some advice. Thank you in advance.

@PochiRS

5 жыл бұрын

Is not it a result of detonation?

@2516killer

5 жыл бұрын

@@PochiRS well I am not sure, this is why I am asking for advice. The bike is used for racing in Bulgaria. I am not sure whether I should lower the ignition timing(current 2mm from TDC) or should I use higher octane gasoline(current used 100 octanes). The coil is selettra CDI, compression 13:1, exhaust is jolly moto corsa.

@PochiRS

5 жыл бұрын

How about making the main jet bigger?

If i have 180cc two stroke engine,how much squish band i need?can you give me an idea sir?

@PochiRS

3 жыл бұрын

I don't know. Racing?　Street? The conditions are different.

Hi. What is the minimum and maximum size between the piston and the head should be.

@PochiRS

5 жыл бұрын

about 0.8mm

@tygo9500

5 жыл бұрын

@@PochiRS how do you get to this size?

Good morning Mr.Pochi,i' am always happy to follow your videos. I'm considering purchasing a 54mm charmo cylinder and would like to have your opinion on it. Alternatively I can evaluate the italkit cylinder, what do you think? Thanks in advance, greetings Mauro from Italy.

@PochiRS

4 ай бұрын

In my opinion, I did not see any particular problems with the quality. I think it would be an option if repair parts such as pistons were easily available.

@arri-go3220

4 ай бұрын

@@PochiRS thank you so much 👍🏼

Whats this give you? like extra 2 BHP maybe lol

Is that a dry clutch setup?

@PochiRS

5 жыл бұрын

It's not.

what is the most powerful cylinder to rs 125?

@PochiRS

4 жыл бұрын

I don't know exactly. The actual output does not match the perceived speed.

@citi9589

4 жыл бұрын

Il suo cilindro originale, lavorato da un bravo meccanico è il più potente

Hello mr. Pochi. How much does Charmo and BC engineering cylinders cost? Which one is cheaper?

@PochiRS

4 жыл бұрын

The cheapest is Charmo. Because it was obtained in Japan without importing. You also have the option of MITAKA.

@tegerra2595

4 жыл бұрын

@@PochiRS okay. Would it be possible for you to send BC engineering cylinder to me, and i will pay for everything. How much would it cost in total?

hello mr pochi..which is the best cylinder?

@PochiRS

5 жыл бұрын

I am satisfied with the BC Engineering 140 cc kit.

Oh, now you got the BC kit. Any first impressions compared to the other kits you've tried?

@bishoymikheal

6 жыл бұрын

Thrasyvoulos Vlachos yes I would like to know if it is really all that great like people say, and how it compares to the italkit cylinder.

@PochiRS

6 жыл бұрын

Probably,I can't tell the difference between the two cylinders, because I'm slow.

@alanmuscat59

6 жыл бұрын

Pochi you keep saying that but actually your pretty fast on track

@msrx08

6 жыл бұрын

The Italkit's cylinder is a totally Italkit's design and production. Bc's cylinder is a modified Aprilia cylinder so you have the original Gilardoni's and Aprilia's quality.

@thrasyvoulosv

6 жыл бұрын

Italkit Gen 1 was also a bored and ported genuine Aprilia cylinder. The new Italkits are a new cast, different to the original aprilia barrel, but they're still made by Gilardoni. They seem to have some really bad conservative porting though. Also we don't know if Gilardoni is the one who does the plating for BC's cylinder.

How about top speed after chnge block?

@PochiRS

3 жыл бұрын

I don't know about that, because I don't get the maximum speed on the track.

@muhammadizzat448

3 жыл бұрын

Pochi nice.. i also got rs125. After tune up, i got 190kmh..

I thought bc engineering has stopped making the cylinders now. Did you buy the last one?

@PochiRS

6 жыл бұрын

My cylinder kit is the second to last. Maybe.

@alanmuscat59

6 жыл бұрын

I only know because I saw there face book a while back and asked as to why they are no longer making them. Was told by bc engineering team they will be making a new version

@PochiRS

6 жыл бұрын

I know. The new version seems to be 144 cc of a 58 mm piston.

@alanmuscat59

6 жыл бұрын

Did you not want the 144 kit or unsatisfied with it?

@PochiRS

6 жыл бұрын

I will also purchase the 144 cc kit. It is a lot of fun to try.

Mirip buring ninja

@PochiRS

6 жыл бұрын

What? I could not translate well.

@tukangdolan8056

6 жыл бұрын

Its same like ninja 2 stroke

@PochiRS

6 жыл бұрын

Is it about KRR 150? It is totally different.

Do you have reliability issue with charmo

@PochiRS

Жыл бұрын

Not sure if the quality is good enough to recommend to others.

@krolzizi1

Жыл бұрын

@@PochiRS I have issues with the piston but cylinder are ok. Which big bore kit do you recommend?

@PochiRS

Жыл бұрын

I now use HTM Racing 144cc. They have a supply of pistons only, and I am going to use that for a while.

@krolzizi1

Жыл бұрын

@@PochiRS compatible with charmo cylinder?

@PochiRS

Жыл бұрын

I haven't done that verification. I don't trust the pistons any more than I trust the CHARMO cylinders.

Why not 154?

@PochiRS

5 жыл бұрын

Does 154 cc cylinder run over 12000 revolutions?

@Doitwithdowns

5 жыл бұрын

That haven’t hit my mind. But i think i’m gonna run 154 for street use.

I don’t understand why you want to put big bore kits on the bike it just ruins the bike the original 125 cylinder is great and can be tuned my rs 125 track bike / has v force 3 reeds/ full arrow titanium exhaust system/ ram air sponge filter (no airbox) 28 vbsh cd racing carb set up properly/ racing ecu unit/ racing ht lead / heavy duty clutch / domino throttle/ and the bike does 112mph and has 34bhp and a 0-60 time (my personal best) of 5.7 seconds and a rave 1 power valve (the best valve)

@thesweeneyboys2974

4 жыл бұрын

Pochi you’ve focused more on lightening your bike than actually learning how to tune it properly your bike is awful no offence, the kits ruin the bikes capabilities

@PochiRS

4 жыл бұрын

Just do what you want. I do too. If you don't find my video interesting, you can watch others' videos.

@thesweeneyboys2974

4 жыл бұрын

I just think you’re trying too hard, and try the v force 3 reeds you will see a massive difference in throttle response and how the bike accelerates, especially if you are running a sponge air filter (cone) but you just have to jet the carb up correctly and you will have a lot more mid range and a better flow of air/fuel to the cylinder

That's one mean chainsaw.