Download Raid for free iOS/Android/PC ➡ t2m.io/MakeitExtreme and get 2 strong Epics+1 Legendary champion⚡Available via this link only. 🍀 Take part in the SpringHunt event and get your gift at springhunt.plarium.com 💎 Prizes include GAMING CONSOLES and Amazon gift cards with a total value of $10,000! 🔥 Additional bonus - after downloading Raid with my link redeem the code "SPRINGHUNT24" to receive more rewards! ⌛ Hurry, this offer is available exclusively from April 15th to May 31 for both new and existing players 📱Link for IOS users to enter Raid Shadow Legends codes ▶ plarium.com/en/redeem/raid-shadow-legends/

As usual, another well machined project. However this is the first time I have to make negative comments. 1. Never use a home made inertia reel. Safety devices are designed and tested for a reason 2. The comment on those carabineers is correct, they are not rated. Also the square edge that you put on the connecting point will cause the carabineer to fail on a proper fall from height. 3. Inertia reels are designed to reel in and out while walking around to always keep the line taught. All that electric release stuff should be removed as if there is slack when you fall it allows you pick up speed and there causing more physical damage in the event of a fall. But feel free to use it yourself at home if you want. That's your choice.

@cottonbrad

8 күн бұрын

Agreed. Safety gear and climbing gear go through a rigorous process to stress test them under the most extreme conditions. I understand that you are a gifted and skilled machinist, but you should not trust this device with your life.

I've climbed for 20 years don't trust those cheap snap locks. There's a reason climbing gear has a minimum 20Kn rating on them. Webbing also has a Kn dynamic load rating make sure yours can handle the stress before you put any real height under that device. The stress of a 3-4 m fall vs a 20m fall is massive. Be safe guys.

First 14 minutes:" Wth is he building??" 14:00 " Ohhhh THAT'S what it is :D "

In a way, this is one of the most impressive things I've seen you guys build. You are trusting your skills with (probably) your safety

One day, he's going to get a spray booth, & I'm going to fall off my chair in amazement.

Along with the rest of the comments regarding safety concerns because of the carabiners, attachment points, electric latch, etc., good luck falling into that device from a height without a shock absorbing lanyard also. If you ever need to rely on that device to actually catch you and prevent a fall from height, you will probably not come out of it uninjured. I hope others don't follow your lead and try to make these for their own use.

Be sure to have as many kids as possible, we need more people like you to even the balances ❤

I would never trust my life to a homemade version like this. I bought a self-retracting lifeline for working on the roof. It was expensive but I know it will save me. Don't mess around with safety gear!

Please dont trust those carabiners, they're not rated and trusting one will get you killed. HowNOT2 has a video on sketchy amazon carabiners and gear, and those specific ones break at half the standard for climbing (11kN instead of the MINIMUM recommended of 20kN). For your own sake get some proper rated ones.

@AlanVelascoEscorcia

9 күн бұрын

Don't take this as the typical negative comment How can you tell the quality of the carabiners by just looking at a few frames of them?

@JS-oy6nn

9 күн бұрын

My steel carabiners hold 11,240 pounds and my aluminum ones hold 5,000 lbs. these are all high quality Petzl, Rock exotica. I trust these with my life, it’s why I use them.

@rallymax2

9 күн бұрын

@@AlanVelascoEscorciaas someone that has rock climbing gear, being round (vs forged) the way they look makes me immediately think they are not human rated. Could easily be wrong but they don’t look strong. There is a reason proper gear is expensive.

@junaalbafaraj9585

7 күн бұрын

I trust that carabiners more...than you...🤣

Let me give you some advice. If you put automotive soundproofing on a part that is not machined, you won't hear that monstrous howl 5:54

Should’ve just cut the notches on the round sheet metal on the plasma cutter 🤦‍♀️ 😅

@dimitar4y

9 күн бұрын

Yea he completely threw the game on this one.

Good job mister beautifully done

Next make a vibration polish machine🙏🏾

Amazing work and incredible music choice 👏👏👏

you guys are just the best

Wow 👌 that's incredible work 👏 🙌

Amazing job my friend congratulations

@MakeitExtreme

8 күн бұрын

Thank you! :)

Awesome build!

Towards the end I thought you were making a special effect for a movie that involved floating over something, your not right?.

You have very skill fully omitted, how safety lock actually engages.

How much you love your lathe? 😁

My SRL is OSHA certified…

Μπράβο ρε μάγκες!!!!

@MakeitExtreme

8 күн бұрын

Thank you for your support!

I feel a patent coming on! Very cleaver!

Osha has entered the chat

nearly 2 million subs and as of right now 3 hours in only 760 likes on 5600 views, would think those numbers would be a lot higher.

😂😂Putos locos, que guapo tiiiio 🎉🎉

Bonne travaille comme d'habitude 👌

Awesome video & musics😮❤️ !!

That greats your diy😊

Adoro seus videos, congratulations!!!!!!!

Como eu ADMIRO esses caras !

Super gut 👍🤣🔩🔧

Crazy dude. 😂

It is a balancer. Now I get it!....sort of!

Saying hi to you here in Brazil

AWESOME !!!!!!!

It's a serious thing

Guys what happen to the car project? It is completed yet?

ΣΥΓΑ ΤΟ ΖΕΜΠΕΛΕΚΙ ΠΟΥ ΕΚΑΜΕΣ ,ΕΙΝΕ ΑΠΟ ΤΙΝ ΔΕΚΑΕΤΙΑΝ ΤΟΥ 1960 .

*As always* a 👍 to an excellent video, design and build. Looking forward to the next video-#0148. God bless.

... Have to admit, the convenience of it just keeping something suspended where you left it, I feel, is an unexplored one. People rely on just a winch normally. This is like, an analogue winch?

@Spiker985Studios

7 күн бұрын

Technically, it would be classified as a "fall arrester". The design indicates that it should be able to be used to prevent (or arrest) falls from heights In the United States, OSHA, (Occupational and Safety Hazard Administration) states that any height above 6ft should have a fall arrester and a safety harness However, much like other comments, this device should not be used for such a task as it doesn't operate in the same manner and some of the accessories they bought are not rated adequately

not the most extreme of your designs. Definitely see lots of room for improvement..

@DanKoning777

9 күн бұрын

You may have a point-but just to make sure, lets compare his design/build to yours first-the one that *YOU* designed/built. You know, the model that *isn't* void of all the "improvements" you *definitely see.* You do have a link to your video; right?

@dimitar4y

9 күн бұрын

@@DanKoning777 I don't need one, and if I needed one, I don't have a reason to record it. I can make a cad model for you to make it and compare with his? You know, to your channel where you're definitely making things instead of making autistic arguments only autists think are smart? You're cringe btw.

@Spiker985Studios

7 күн бұрын

​@@DanKoning777Not the point, if this it to be used as a fall arrester (as they demonstrated in this video) then this project is a safety hazard, not safety equipment.

Good luck

Grandioso!!!!🙌🙌🙌🙌

Awesome

Nice

Έπος !!

удобная штука. как раз думаю, как себе лебедку сделать.

No war, but peace No advertisement, it's prostitution

Super Bad ass 🫵🫵👏👏👏👏👏

Top talento qualificado certo sucesso

Great😊

💪

just now October ends dropped a banger 🔥 You gotta react to it!

Dang son

I wish you'd make a tripod and keep your camera on it for more than two seconds.

@be007

9 күн бұрын

you are so right, its totaly crazy and i getting motion sickness from watching it.

👍хорошо, а сколько метров лента

Отлично подняли, а как опустить?

😊

What happened to the race car

@MakeitExtreme

8 күн бұрын

Its getting ready!!! Stay tuned!

Kawasaki zx6 ?

The men's section.

Alat apa ini?

лайк не глядя !

What happened to the car project?

It's your neck.

Отлично 😂

Masters !!

Sa-whatnow? This word on this channel?

💞🙏💞

Please, we want the last part of the car project...don't be lazy.

@Country_Life_Japan

10 күн бұрын

lol 🤭🤣💀

@chmakiss

10 күн бұрын

😂😂😂

@nathanieljames7462

9 күн бұрын

That thing is crazy imbalanced. He probably cut his losses.

😎😎😎😎👍👍👍👍👍👍✌✌✌✌

F commercials and advertising

💞🇱🇧

to long advertisement

👍🏻👍🏻👍🏻🎅🏻🇫🇮🔧👌🏻

wtf with that "dynamic" camerawork ? constant moving from left to right, zoom in and out, up and down , man, i gott terrible motion sickness looking at these "dynamic" video,s. its a pitty because i like the content, but now i,m gonna unsubscribe because i cant watch it without getting sick. i hope you change your dynamic camerawork in the future, so i can watch it again. cheers ben.

like

cancellata iscrizione

Nice, a raid ad.. have an unsubscribe.

Well, that was pretty useless.

чет, херня какая то бесполезная получилась

Aren't KZread commercials enough. Unsubscribed

Why do you hate my ears so much?!

troppa pubblicità

NOLIKE