Great clean install as usual, I can appreciate the work you put i to your truck. All the custom parts just make it look and preform better. Makes the rest of us only wish we could make it ourselvs. Great job on it. Keep the vids coming!

One of my favorite channels on KZread. Keep the content coming bud!

Nice job brother. It looks great. Thank you for sharing. Keep them coming.

impressive as always brother, thanks for sharing, youve inspired me to tackle several projects already, keep up the great work, ideas, creativity., etc.

Cool dude 😎 what a fancy engine bay 💎

Clean work as usual

Man your a great fabricator!!!!! #canada!!!!!!!

Glad you like it bro!! 😋😋 looks really good!

Great project. The only thing I would of added is Steel Wool in the catch can before welding it up. The steel wool catches the oil vapor out of the air where it then condenses and drains down to the bottom. If you have accesive drips from the hoses then I'd cut the top off and add some steel or brass wool.

@mustafamerrick7975

3 жыл бұрын

i know I'm kind of off topic but does anyone know of a good site to watch newly released tv shows online?

@holdenbraylen763

3 жыл бұрын

@Mustafa Merrick Try Flixzone. Just search on google for it =)

@rydernikolas8860

3 жыл бұрын

@Holden Braylen yup, been using Flixzone for years myself :)

@mustafamerrick7975

3 жыл бұрын

@Holden Braylen thank you, signed up and it seems to work =) Appreciate it!!

@holdenbraylen763

3 жыл бұрын

@Mustafa Merrick no problem xD

Looks sick man!!

Good job with the catch can bud 👍 they sure don't leave much room to work with in there

Buddy, I'm bringing my truck to your shop. love the attention to detail...

For more clearance on the valve cover you could use a 90° AN -12 to NTP fitting or a 90°AN -12 union fitting. You could also use MS fittings in place of the AN. Aeroquip should have what you need.

Fingers crossed that the one way valve never stops working!!!

Another great video!

Great video as usual

Somebody stole my 99 2500 from kelowna Dec 21st. ..2 days after new brakes and a power steering pump. ..it's purple with rips in the back seat if you see or hear of parts for sale. $1000 reward no questions asked.

Awesome video man wish you was closer to my area

@shearerperformance4016

5 жыл бұрын

Do you do EFI live for 6.7 Cummins?

That did look good

That valve cover was engineered by someone who wanted too look fast not go fast.

Nice work

I prefer buying the stainless steel commercial kitchen scrubbies and stuffing the can with those and using a dip tube. It has worked better than any baffled can I have tried ever.

@Cumminslife

5 жыл бұрын

If I have any issues with this setup I will give that a try.

@blackopsrocks

5 жыл бұрын

@@Cumminslife I dont suspect you will for years to come unless the motor is quite loose. I use scrubbies stuffed in cheap cans on turbo gas motors. Usually we gap rings and of course that produces some blow by. I have a catch can on my 24v as well, different reason though, wisconsin weather is all around the dew points in the winter and moisture can get out of hand.

@Cumminslife

5 жыл бұрын

​@@blackopsrocks Have been ripping it pretty hard past few days full fuel 4000rpm+ still not a drop of oil in the hoses. Worked better than expected.

@blackopsrocks

5 жыл бұрын

Awesome dude. Good to see its working as intended.

I wish I had a great mind like you.

Hey optimal, I really love the chanel. I am wondering where you always get your black fittings and black lines for your oil lines?

Build a intake horn since your good at welding

Can you add in a pressure gauge to see how much crankcase pressure you have?

Optimal welding it’s because the arp head studs stick up more then the oem ones it was designed to fit the original motor

Another excellent video! My only question is if you have enough slack in the hoses to allow for the engine torquing under load?

@Cumminslife

5 жыл бұрын

The catchcan and vent hoses are bolted to the engine. There will be no movement in hoses.

I think your stuff is awesome. Just watched your video on the traction bars...do you have any sets for sale?

That line with the one way check can get blocked off at the block .it was for oil drain back and they sell block off plates.

Dude youre a fucking beast!!!!!!!!!!! And you had Bonita Applebum in the background Tribe callled quest!!! I got a 2005 3500 5.9 dually at the house, cant fucking drive it because I'm overseas but I'll be keeping up on your videos, fucking all the shit you did on the valve cover come out super squared the fuck away.

How much blow by do you have? And how much oil did you consume before and after the catch can?

What valve cover is that? A Hellman or custom made?

With the stock CCV canister, on the valve cover couldn't you just pop of the large vent line and mill out the opening vent that feeds from the valve cover for a better breathing unit? If your worried about sealing the system completely you could just get a large enough hose fitting something stubby and put a one way valve on it so moisture doesn't get inside or plasti weld a one way valve to the outlet. You could retain the factory drain back to the crank case as well on this setup. When I got my 03 HO, the larger vent hose was barely holding on and just collecting oil, I just ripped it of and left it wide open while retaining the factory drain. I can see the steam from the back side of my hood when its cold, but at most i get a light mist of oil on my valve cover that i wipe off every once and awhile. Also on your design using the billet cover couldn't you have just drilled ports on the side of the cover to mount your A/Ns I would assume it wouldn't make a difference vent wise since its pressure taking the least path of resistance to a low pressure area but i could be wrong. Also on your design I was surprised at how bulky it was, with the fittings that you were using I would've assumed that the holding canister size wouldn't need to be so huge since its venting and draining like a mf back to the crankcase. Keep up the content, hope this feedback helps.

Looks like your almost ready for a second cp3 almost

Sounds good I live in Ohio so it would be a good drive to Canada, so I’ll look at it, thanks

Lol I bet your buddy gave you that cover cause he couldn’t figure out why it wasn’t sitting flat haha good video!

@arcticcatmaniac

3 жыл бұрын

Lol it sat flat on my truck no issues! So weird. I used it for a good 5k miles. I went to D&J.

I have a 2004 Dodge Cummins and I’m looking to purchase one of your 6 level tuners, what all comes with the switch, and or what I need to set it up

@Cumminslife

5 жыл бұрын

My switch comes with everything you will need for install. You will also need a hp tuners mpvi2 to load my tuning into your truck and so we can datalog to dial it in further. If you can come see me locally we can simply use my mpvi2.

what size tires are you running?

Real nice job. you can make and sell them best design i have ever seen.great video thanx.

I feel like a goof watching this. Looks great. I've got a 2001 2500 and Im trying to figure out if I should use a water or orange juice bottle. Lol.

@Cumminslife

5 жыл бұрын

Id go with the orange juice bottle 👌👌

Have you thought about doing any bumper builds for 2nd gens?

@Cumminslife

5 жыл бұрын

Ya coming soon!

Idk if u remember me or not but as of this morning the 4bt in the 96 xj is 100% complete sorry i didnt get u to do it ill send some vids if ur intrested

@Cumminslife

5 жыл бұрын

Sweet would love to see it

What's the song you are listening to at 13:15 ?

Was that the arp heads studs the valve cover was hitting on.

@triplepedal_03

5 жыл бұрын

Dixie Mae No, rocker box cover bolt.

Clean that air filter man lol... otherwise good instructional video

@Cumminslife

5 жыл бұрын

It is clean just real old and stained. I will upgrade to larger size that fits my turbo better soon.

I just realized you did the 2nd gen swap what intake tube is that on the turbo

@Cumminslife

5 жыл бұрын

I cut up k&n setup I had on stock turbo

@colbyc.6698

5 жыл бұрын

@@Cumminslife I tried that with a 45 my filter is to big the AFE big fucking air filter I think it's bfaf I'm fixing to build one from 5 inch exhaust tubing

Next time we are NOT gonna use UPS lol!

@Cumminslife

5 жыл бұрын

Yeah that cover has been to more places in the states than me.. At least I got it eventually!!

@arcticcatmaniac

5 жыл бұрын

@@Cumminslife Haha right! Glad ups let us know they lost it... they're such a joke

Did you have any issues with oil consumption when you did this mod?

@Nate6133

Жыл бұрын

the purpose of an oil catch can that recirculates is to prevent oil from burning which is why he has the drain on the bottom of the can, non recirculating catch cans will have the oil gather in the can and need to be drained. Its in the name catch can, it catches oil and either vents to atmosphere and fills or recirculates like his

@acrophobiar1

Жыл бұрын

@@Nate6133 yes i under stand that the system i built was just like his and i have a drain back to block mine in a double chamber can so it can vent off and drain back. I was asking because i stared getting a ton of blow by through can. But i figured it out i burnt up 2 sets of rings so thats why thanks for replying

Why tf are you so smart

You got custom tunes for a 98 24v

@Cumminslife

5 жыл бұрын

I have a vp44 ecu on my bench right now that I have read out the tune and also flashed new modified file in with no issues so far. Custom tuning with sotf coming very soon.

@oneclapped5.9

5 жыл бұрын

@@Cumminslife sound good bud been watching you for a good bit and if i would get tunes problay get yours and the ne catch can look dope with the valve cover

@cmorga43morga69

5 жыл бұрын

I'd be interested as well. Keep us updated!

@dakotamcdivitt1808

5 жыл бұрын

definitely interested. especially if it's cheaper than the quadzilla

Guess I need to go build me 1 of those...

@Cumminslife

5 жыл бұрын

Not really required in any way for your setup but sure does look sweet!!

@tonybergosh8582

5 жыл бұрын

I know at least 3 24v 2nd gens at my house that could use a catch can, how bout a video for that?

@Cumminslife

5 жыл бұрын

@@tonybergosh8582 Yeah you could build it exactly the same on your vp trucks.

@tonybergosh8582

5 жыл бұрын

Exactly the same? What about the puke tube on the front cover?

@Cumminslife

5 жыл бұрын

@@tonybergosh8582 You could run your catchcan from there or block that off and tap new lines into valve cover.

I deleted my work truck and that's all I thought was necessary. But I'm old so I don't get it I guess.. I'm older than them old Sabbath songs I hear!

@Cumminslife

5 жыл бұрын

A delete and tune is enough for most people but I do this to see how truck reacts to improve my tuning ability's.

@jerrybrandt9377

5 жыл бұрын

Well good work !! You sure do get things done . I thought you was a pipe welder at first . Didn't realize you know the Cummins like you do . If I was closer I would have you tune my rig for sure !! I need all the mpg i can get

Metallica 👌✌

I like your videos. I have to dislike this cz all that work for no reason